A-A-50718 Test Set, Fuel SystemThis Commercial Item Description, CID, describes an AC Fuel Quantity Test Set based on Bridge Capacitance/Resistance Test Set BC/RFGTS technology herein referred to as test set. This CID describes a minimum requirement for the test set in which only those manufactures that meet or exceed the following requirements are qualified per this CID.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-50718A

4.   PRODUCT CONFORMANCE PROVISIONS

4.1    Product Conformance.   The test set provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and  quality  assurance  practices,  and  be  the  same  product  offered  for  sale  in  the  commercial marketplace.  The government reserves the right to require proof of such conformance.

4.2    Metric  Products.   Products  manufactured  to  metric  dimensions  will  be  considered  on  an equal  basis  with  those  manufactured  using  inch-pound  units,  provided  they  fall  within  the specified  tolerances  using  conversion  tables  contained  in  the  latest  revision  of  FED-STD-376, and all other requirements of this CID are met.  If a product manufactured to metric dimensions exceeds  the  tolerances  specified  in  the  inch/pound  units,  a  request  should  be  made  to  the contracting officer to determine if the product is acceptable.

4.3    Warranty.   The  manufacturer  shall  offer  this  test  set  with  a  five  (5)  year  warranty,  as  a minimum, on parts and labor to repair these instruments, should they experience a fault which is not  obviously  due  to  abuse  or  irresponsible  actions.   A  label  shall  be  affixed  to  the  test  set providing the shipping address for warranty service and the period of the warranty by date.   A note shall be on the label stating, "Return shipping address must be enclosed."

4.4    The contracting officer has the option of accepting or rejecting the product.

5.   PACKAGING.

5.1        Preservation,  Packaging,  Labeling,  And  Marking.   The  preservation,  packaging,  packing, labeling, and marking shall be as specified in the contract or order.

6.   NOTES.

6.1    Sources of documents.

6.1.1   Military  Specifications,  Standards,  and  Handbooks  referenced  herein  may  be  obtained from  the  Standardization  Documents  Order  Desk,  700  Robbins  Ave.,  Bldg  4,  Section  D, Philadelphia,    PA    19111-5094    or    online    at    https://assist.daps.dla.mil/quicksearch/    or https://assist.daps.dla.mil.

6.1.2  The Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC  20402 or online at https://www.arnet.gov/far.

6.2    Ordering data.

a.   CID document number and revision.

b.   Product conformance provisions (see 4). c.   Packaging requirements (see 5).

Source:  https://assist.dla.mil  --  D5ownloaded:  2014-09-26T08:46Z Check  the  source  to  verify  that  this  is  the  current  version  before  use.