A-A-50755
15 October 1986
COMMERCIAL ITEM DESCRIPTION
CONTROL HEAD ASSEMBLY TEST FIXTURE
The General Services Administration has authorized the use of this commercial item description.
SCOPE. This Commercial Item Description (CID) specifies a test fixture that test the control head assembly P/N/ 627-502-001 by providing a drive current to both the azimuth and elevation servo motors, by supplying 28VDC power to four modules within the head assembly load. This system shall be known as a control head assembly test fixture.
APPLICABLE DOCUMENTS.
SPECIFICATIONS
MILITARY
MIL-M-7298 – Manual Technical, Commercial Equipment.
MIL-T-28800 – Test Equipment for use with Electrical and Electronic Equipment, General Specification for.
MIL-M-38797 – Manual Technical, Operation Instructions and Maintenance Instructions (for various types of Equipment).
MIL-C-38999 – Connector, Receptacle, Electric, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series II.
STANDARDS
MILITARY
MIL-STD-12C – Abbreviations for Use on Drawings, Specifications, Standards and in Technical Documents.
MIL-STD-15-1A – Electrical and Electronics Symbols.
MIL-STD-681B – Identification Coding and Application of Hook Up and Lead Wire.
MIL-STD-810D – Environmental Test Methods and Engineering Guidelines.
OTHER PUBLICATIONS.
USAS Y32.16-1965 – Electrical and Electronics Reference Designations.
T.O. 00-25-234 – General Shop Practice Requirements for the Repair, Maintenance and Test of Electronic Equipment.
SALIENT CHARACTERISTICS.
1. Performance requirements.
a. Control head assembly test fixture. The control head assembly test fixture has an external power of 28 ±1.OVDC, 16.07 AMPS.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business