A-A-50761
intensity for >1 minute. From Max Write mode to Store, traces may be stored at reduced intensity for > 5 minutes; to View mode, traces may be viewed at normal intensity for > 15 seconds.
(15) Erase; manual pushbutton erasure takes approx 300 ms.
b. Horizontal Amplifier
(1) External input
(2) Bandwidth: dc-coupled, dc to 5 MHz, ac-coupled, 5 Hz to MHz
(3) Deflection Factor: 1 V/div in X1 6.2 V/div in X5, 0.1 V/div in X10.
(4) Vernier provides continuous adjustment between ranges.
(5) Dynamic Range: ± 20V.
(6) Maximum input: 600 Vdc (ac-coupled input)
(7) Input RC approx 1 megohm shunted by approx 30 pF.
(8) Sweep Magnifier: X5, X10; accuracy. ± 5% with 3% accuracy time base.
c. Calibrator
(1) Type: approx 1 KHz square wave. 3 µs rise time.
(2) Voltage. 10V p-p into ≥ 1 megohms, accuracy ± 1%.
d. Outputs.
Four rear panel emitter follower outputs for main and delayed gates, main and delayed sweeps or vertical and horizontal outputs when used with TDR/sampling plug-ins. Will drive impedances ≥ 1000 ohms without distortion.
e. General.
(1) Operating Environment
(a) Temperature 0 to + 55oC
(b) Humidity: to 95% relative humidity at 40oC.
(c) Altitude: to 4600 m (15,000 ft).
(d) Vibration: vibrated in three planes for 15 min. each with 0.254 mm (0.010 in) excursion, 10 to 55 hz.
(2) Dimensions: for 19” rack mount.
2. Modes of Operation (Plug-in)
a. Channel A; channel B, channels A and B displayed alternately on successive
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business