The timer shall have the following approximate dimensions:
Height: 2-1/2 inches (6.4 cm)
Width: 6 inches (15.2 cm)
Depth: 6-1/4 inches (15.9 cm)
The timer shall have an output connector to allow analysis of the radiation waveform using a storage oscilloscope.
The battery shall be easily replaced, and provide at least 100 hours of continuous use.
The timer finish shall be uniform and free of scratches, discoloration, and burrs.
Each timer shall be supplied with a set of operating instructions, and service manual with parts identification.
Workmanship. The timer shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One timer, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business