A-A-58047C
2.8.3 Rack-Mount. The analyzer shall be capable of being rack-mounted in a standard
ANSI/EIA-310-D equipment rack.
2.9 Manuals. The equipment shall be delivered with operator, maintenance/service, illustrated
parts, and calibration manuals. Format and quantity shall be as specified in the contract or order.
Level of maintenance philosophy, as defined in MIL-PRF-28800, shall be as specified in the
contract or order.
If evidence substantiating that the Mean Time Between Failures (MTBF) of the instrument
exceeds 20,000 hours is submitted, the maintenance/service manual shall not be required.
3. REGULATORY REQUIREMENTS.
3.1 Regulatory Requirements. The offeror/contractor is encouraged to use recovered materials
to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal
Acquisition Regulation (FAR).
4. PRODUCT CONFORMANCE.
4.1 Product Conformance. The products provided shall meet the salient characteristics of this
CID, conform to the producer's own drawings, specifications, standards and quality assurance
practices, and be the same product offered for sale in the commercial market. The government
reserves the right to require proof of such conformance.
4.2 Metric Products. Products manufactured to metric dimensions will be considered on an
equal basis with those manufactured using inch-pound units, provided they fall within the
specified tolerances using conversion tables contained in the latest revision of Federal Standard
No. 376, and all other requirements of this CID are met. If a product manufactured to metric
dimensions exceeds the tolerances specified in the inch/pound units, a request should be made to
the contracting officer to determine if the product is acceptable.
4.3 Acceptance. The contracting officer has the option of accepting or rejecting the product.
5. PACKAGING.
5.1 Preservation, Packing, and Marking. Preservation, packing, and marking shall be as
specified in the contract or order.
6. NOTES.
6.1 Sources of documents.
6.1.1 Military Specifications, Standards, and Handbooks referenced herein may be obtained at
https://assist.daps.dla.mil or from the Standardization Documents Order Desk, 700 Robbins Ave.,
Bldg 4, Section D, Philadelphia, PA 19111-5094.
6.1.1.1 MIL-PRF-28800F, 24 June 1996, Test Equipment for Use with Electrical and Electronic
Equipment, General Specification
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business