MIL-PRF-83287G
DEPARTMENT OF DEFENSE SPECIFICATIONS
-
Indicators, Fault Locating, Flag Indicating, Mechanical Reset.
-
Indicators, Fault Locating, Flag Indicating, Electrical Reset.
-
Indicators, Fault Locating, Ball Indicating, Electrical Reset.
-
Indicators, Fault Locating, Dual Drum Indicating, Mechanical Reset.
-
Indicators, Fault Locating, Internal Drum Indicating, Electrical Reset, Printed
Circuit Mounting.
DEPARTMENT OF DEFENSE STANDARDS
-
Tests Methods for Electronic and Electrical Component Parts.
-
Aircraft Electric Power Characteristics.
-
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
-
Quality Assurance Requirements for Measuring Equipment, Metrological
Confirmation System for Measuring Equipment
(Copies of these documents are available from https://www.iso.ch or to International Organization for
Standardization American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036.)
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCLS)
-
Calibration Laboratories and Measuring and Test Equipment - General
Requirements-Replaces Mil-Std-45662
(Copies of these documents are available from https://www.ncsli.org or to National Conference of Standards
Laboratories (NCSL), 2995 Wilderness Place, Suite 107, Boulder, CO 80301-5404.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related specification sheets) the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with the
applicable specification sheets. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Qualification. Indicators furnished under this specification shall be products that are authorized by the
qualifying activity for listing on the applicable qualified products list before contract award (see 4.3 and 6.5).
3.3 Materials. Materials shall be as specified herein. However, when a definite material is not specified, a material
shall be used which will enable the indicators to meet the performance requirements of this specification. Materials
shall not support combustion and shall be self-extinguishing. Materials shall not emit noxious gases in harmful
quantities or gases in quantities sufficient to cause contamination or explosions in sealed enclosures. Materials shall
be compatible with aircraft hydraulic fluids. Materials shall be fungus inert. Acceptance or approval of any constituent
material shall not be construed as a guaranty of the acceptance of the finished product. Use of recycled, virgin and
reclaimed materials is permitted.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business