MIL-DTL-16034B
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form
a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
FF-S-200
-
Setscrews: Hexagon Socket and Spline Socket, Headless
FF-S-210
-
Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric)
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
COMMERCIAL ITEM DESCRIPTIONS
A-A-55057
-
Panel, Wood/Wood Based Construction and Decorative
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-29
-
Resistors, Fixed , Meter Multiplier, External (High Voltage, Ferrule
Terminal Type)
MIL-S-901
-
Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and
Systems, Requirements for
MIL-E-917
-
Electrical Power Equipment Basic Requirements
MIL-DTL-1222
-
Studs, Bolts, Screws and Nuts for Applications Where a High Degree of
Reliability is Required, General Specification for
MIL-I-1361
-
Instrument Auxiliaries, Electrical Measuring: Shunts, Resistors, and
Transformers
MIL-L-10547
-
Liner, Case, and Sheet, Overwrap, Water Vaporproof or Waterproof,
Flexible
MIL-DTL-15090
-
Enamel, Equipment, Light Gray, (Navy Formula No. 111)
(See supplement 1 for list of specification sheets.)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-129
-
Military Marking for Shipment . and Storage
MIL-STD-130
-
Identification Marking of U.S. Military Property
MIL-STD-1916
-
DOD Preferred Methods for Acceptance of Product
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business