MIL-PRF-83287/1D
REQUIREMENTS:
Dimensions and characteristics: See figure 1 and table I.
Weight (including hardware): 0.031 pound (14 grams), maximum.
Transfer pulse length: A pulse length of 40 milliseconds or greater shall cause a fault indication. A pulse length of
2 milliseconds or less shall not cause a fault indication.
Terminal strength:
Rigid type solder terminals:
Test condition A (3 pounds, minimum).
Wire type solder terminals:
Test condition A (3 pounds, minimum).
Test condition C (1 pound, minimum).
Marking of solder terminals: The positive terminal shall be identified by a red dot.
Extent of qualification: Qualification testing and approval of M83287/01-01, M83287/01-29 and M83287/01-36 shall
be sufficient to grant qualification approval for all indicators covered by this specification sheet. Qualification testing
and approval of M83287/01-01 and M83287/01-28 shall be sufficient to grant qualification approval for dash
numbers 01 through 28.
Part or Identifying Number (PIN): M83287/01- (dash number from table II).
Random vibration (dash numbers 29 through 36 only): Test condition D, curve 1, 30 minutes test time.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business