MIL-PRF-83287/4C
REQUIREMENTS:
Dimensions and characteristics: See figure 1 and table I.
Weight (including hardware): 6.5 grams, maximum.
Pulse power: 50 milliwatts, minimum.
Transfer pulse length: A pulse length of 25 milliseconds or greater shall cause a fault indication. A pulse length
of 2 millisecond or less shall not cause a fault indication.
Terminal strength:
Rigid type solder terminals:
Test condition A (3 pounds, minimum).
Test condition E (8 ounce-inches, minimum.)
Wire type solder terminals:
Test condition A (3 pounds, minimum).
Test condition C (1 pound, minimum).
Marking of terminals: The positive terminal shall be identified by a red dot.
Vibration: Test condition B of MIL-STD-202 (method 204).
Extent of qualification: Qualification testing and approval of M83287/04-01 and M83287/04-24 shall be sufficient
to grant qualification approval for all indicators covered by this specification sheet.
Part or Identifying Number (PIN): M83287/04- (dash number from table I).
Random vibration: Not applicable.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business