A-A-50728A
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products provided shall conform to the producer's own drawings, specifications, standards, and quality assurance practices and shall be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
5.2 Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer's own drawings, specifications, standards and quality assurance practices and is the same product offered for sale in the commercial marketplace. Small businesses that cannot offer products with established commercial market acceptability may compete by submission of bid samples. (The Government reserves the rights to require proof of such conformance before first delivery and thereafter as
may be otherwise provided for under the provisions of the contract.
6. PACKAGING
6.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES.
7.1 Sources of documents.
7.1.1 Military Specifications, Standards, and Handbooks. Military Specifications, Standards, and Handbooks referenced herein may be obtained at https://assist.daps.dla.mil or from the Standardization Document Order Desk,
700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.
7.1.2 FAR and DFARS. FAR and DFARS may be obtained from the Superintendent of Documents, P.O. Box
371954, Pittsburgh, PA 15250-7954. Electronic copies of the FAR may be obtained from https://www.acquisition.gov/far/ . Electronic copies of the DFARS may be obtained from https://www.acq.osd.mil/dpap/dars/dfars/index.htm .
7.1.3 Institute of Electrical and Electronics Engineers (IEEE) standards products may be obtained at https://www.ieee.org or available from IEEE Operations Center. Phone: (800)678-IEEE. Mail: IEEE Operations Center, Sales Office, 445 Hoes Lane, PO Box 1331, Piscataway, NJ, 08855-1331, USA.
7.2 Known acceptable products. The following product(s) are known to have previously met the requirements of this CID and need not resubmit bid samples or certification. All other manufacturers must meet the requirements of this CID and submit to bid testing and certification as required.
Manufacturer |
Model |
Hewlett Packard |
3586B-003-004-H18 |
Anritsu |
ML 422B |
7.3 Key Words.
Class 5
Digital Interface
Type III
12
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business