A-A-50760
|
Distortion: |
< 1% at 0.1% deviation over entire modulation frequency range. |
|
Meter accuracy |
± 5% of full scale up to 0.1% deviation. (50 Hz to 200 kHz) |
|
Incidental AM |
> 50 dB below carrier at ± 0.1% deviation |
|
Input impedance |
5000Ω nominal |
|
Input connector |
BNC, female |
|
e. External pulse modulation |
|
|
Repetition rate range |
10 Hz – 5 kHz |
|
Pulse level |
Actual RMS value of pulse peak level indicated by front panel meter |
|
Pulse level accuracy |
CW level accuracy plus sample response for pulse width > 4 µsec <1dB. Response for pulse width > 10 µsec < 0.1 dB. (PRF> 50 Hz. duty cycle >0.1%). |
|
Rise and fall time |
Down to 10 nsec, varying with frequency and pulse width |
|
On/off ratio |
80 dB from 775 MHz to 175 MHz decreasing to 45 dB at 512 MHz |
|
Sensitivity |
< 1 volt turns RF on to level indicated on meter. |
|
Input connector |
BNC female |
|
Input impedance |
50 Ω nominal |
|
RF power off |
Output decrease by on/off ratio when AM PULSE pushbutton is pressed |
|
Delay |
No greater than 9 nano seconds from trigger leading edge to output pulse leading edge |
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business