MIL-PRF-49136C(CR)
4.4.1 Group A Inspection. Each unit on contract or purchase order shall be inspected for
conformance to the inspections in Table II. Lots shall be formed from units that pass this
inspection. Lots in which samples exhibit any failure shall be screened for that failure prior
to being subjected to Group B inspection.
Table II. Group A Inspection
Requirement
Test
Inspection
Paragraph
Paragraph
Visual and Mechanical
3.3, 3.4
Personnel Hazards
3.5.1
4.5.1
Edge Rounding
3.5.2
4.5.2
Input Power
3.5.7.1
4.5.7.1
CM Set ON-OFF Control
3.5.7.2
4.5.7.2
CM Set Power Control
3.5.7.3
4.5.7.3
CM Set Output Control
3.5.7.4
4.5.7.4
Lamp Test Operation
3.5.7.5
4.5.7.5
CM Set Voltage Msmts
3.5.7.6
4.5.7.6
CM Set Current Msmts
3.5.7.7
4.5.7.7
CM Set Freq. Msmts
3.5.7.8
4.5.7.8
4.4.2 Group B Inspection. Group B inspection shall be performed on lots that have passed
Group A inspection. This inspection shall consist of the inspection listed in Table III. Each
lot shall be subjected to sampling inspection in accordance with the contract (see 6.2.c). Lots
in which samples exhibit any failures shall be screened for that failure prior to the units
within the lot being subject to Group C inspection.
Table III. Group B Inspection
Requirement
Test
Inspection
Paragraph
Paragraph
Interchangeability
3.5.4
4.5.4
Dimensions and Weight
3.3.2
4.5.4.2
4.4.2.1 Group B Sampling Plans. Group B shall be performed in an order satisfactory to the
Government (6.2.c).
4.4.3 Group C Inspection. Group C inspection shall be performed on units that have passed
Group A and Group B inspections. The inspection shall consist of the inspections specified
in Table IV. Samples shall be selected in accordance with the contract (see 6.2.c).
4.4.3.1 Group C Failures. Action required relative to Group C failure shall be as specified
in the contract (see 6.2.d).
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business