INCH POUND
MIL-PRF-49192A(CR)
19 May 1997
SUPERSEDING
MIL-G-49192(CR)
7 March 1979
PERFORMANCE SPECIFICATION
GENERATOR, SIGNAL, VHF
SG-1170/U
This specification is approved for use by the USACECOM, Department of the Army, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification defines a VHF Signal Generator that operates over a
frequency range of 400KHz to 512 MHz and is capable of producing various signal function
waveforms in the VHF spectrum, hereafter referred to as the equipment.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Commander, U.S. Army
Communications- Electronics Command, ATTN: AMSEL-LC-LEO-E-EP, Fort Monmouth, NJ
07703 by using the self-addressed Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document or by letter.
AMSC N/A:
FSC 6625
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business