MIL-PRF-32516 Electronic Test Equipment, Intermittent Fault Detection and Isolation for Chassis and Backplane Conductive Paths
A-A-50682 - Scalar Network Analyzer 10 MHz to 40 GHz Frequency Range (No S/S Document)
This Commercial Item Description (CID) describes a Scalar Network Analyzer. This CID is meant as a minimum requirement for the Scalar Network Analyzer in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
A-A-50692 - Oscillograph, Portable
This Commercial Item Description (CID), describes a Oscillograph Recorder. This CID is meant as a minimum requirement for the Oscillograph Recorder in which only those manufactures that meet or surpass the following requirements are qualified per this CID.
A-A-50718 - Test Set, Fuel System
This Commercial Item Description, (CID), describes an AC Fuel Quantity Test Set based on Bridge Capacitance/Resistance Test Set (BC/RFGTS) technology herein referred to as test set. This CID describes a minimum requirement for the test set in which only those manufactures that meet or exceed the following requirements are qualified per this CID.
A-A-50726 - Test Set, Telephone
This Commercial Item Description (CID), describes a telephone cable test set (TCTS).
A-A-50727 - Generator, Signal (2 Ghz To 26 Ghz)
This Commercial Item Description (CID), describes a laboratory standard quality bench piece of electronic test equipment which is a bench- mount with rack-mount option, solid-state, general purpose, 2 GHz to 26 GHz, signal generator. This CID is meant as a minimum requirement for the signal generator, in which only those manufacturers that meet or surpass the following requirements are to be supplied per this CID.
A-A-50728 - Frequency Selective Levelmeter And Spectrum Display (Fslsd)
This Commercial Item Description (CID) describes a frequency selective levelmeter and frequency selective levelmeter with spectrum display. This CID is meant as a minimum requirement for the equipment, in either configuration, and only those manufacturers that meet or surpass the requirements herein are qualified per this CID. The frequency selective levelmeter and/or spectrum display is referenced as a FSLSD, the equipment, or the test equipment.
A-A-50729 - Meter, Multiple Scale
This Commercial Item Description (CID), describes a meter, multiple scale, with battery pack, 10 MHz to 18 GHz. This CID is meant as a minimum requirement for the meter in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
A-A-50730 - Generator, Signal 10 Khz To 1 Ghz
This commercial item description (CID), describes a laboratory standard quality bench piece of electronic test equipment, which is a bench mount with rack mount option, solid-state, general purpose, 10KHz to 1GHz, generator signal.
A-A-50731 - Generator, Signal 1 Mhz To 2 Ghz
This commercial item description (CID) describes a laboratory standard quality bench piece of electronic test equipment which is a bench mount with rackmount option, solid-state, general purpose, 1 MHz to 2GHz, synthesized signal generator.
A-A-50732 - Test Set, Interface Bus
This Commercial Item Description (CID), describes a Bus Interface Tester (PMEL).
A-A-50734 - Multimeter, Ruggedized
This commercial item description (CID), describes a Ruggedized Multimeter. This CID is meant as a minimum requirement for the Ruggedized Multimeter in which only those manufacturers that meet or surpass the following requirements are supplied per this CID.
A-A-50735 - Test Set, Microprocessor Board
A-A-50736 - Generator, Electronic Marker, Digital Signal (S/S By A-A-58001)
A-A-50737 - Recorder, Coordinate Data
This Commercial Item Description (CID), describes a general purpose, one pen coordinate data recorder that allows charting on paper sizes up to 11 inches by 17 inches (size B paper).
A-A-50739 - Test Set, Telephone
This Commercial Item Description (CID), describes a connector test set, hereafter called a CTS.
A-A-50740 - Spectrum Analyzer (10 Khz - 50 Ghz)
This Commercial Item Description(CID) describes a solid-state, internal pre-selection, programmable, 10 Hz resolution bandwidth, 10 kHz to 50 GHz, Spectrum Analyzer including external mixers. This CID is meant as a minimum requirement for the Spectrum Analyzer in which only those manufacturers that meet or surpass the following requirements are qualified per this CID. Test equipment offered may be commercially available and may be modified to the extent necessary to meet the following requirements are supplied per this CID.
A-A-50741 - Divider, Power Radio Frequency
This Commercial Item Description (CID), describes a wide band RF power splitter and reflectometer with calibrated line stretcher.
A-A-50749 - Current-Voltage Standard
A-A-50750 - Calibrator, Voltage
A-A-50753 - Generator, Variable Frequency
Generator designed for field, shop or laboratory testing and calibration of electro mechanical and solid state instantaneous and time delay under and over frequency delays.
A-A-50754 - Modulator, Pulse
This pulse modulator is a high performance microwave pulse and modulator covering the range of 2 to 6 GHz.
A-A-50755 - Control Head Assembly Test Fixture
This Commercial Item Description (CID) specifies a test fixture that test the control head assembly P/N 627-5023-001 by providing a drive current to both the azimuth and elevation servo motors, by supplying 28VDC power to four modules within the head assembly, and by receiving and monitoring the control head assembly load.
A-A-50756 - Sweep Generator
Application is AN/EPS 85.
A-A-50757 - Four Channel Recorder
This Commercial Item Description (CID) specifies a portable four 50MM channel recorder which features a four-channel DC and amplifier range of 50MV to 500V full scale with a capability of a maximum common mode voltage of 500VDC.
A-A-50760 - Signal Generator
Rack mounted in the AN/APR-38 Test Set used to test/repair/align the Apr-38 Intermediate Frequency Processor (IFP).
A-A-50761 - Oscilloscope
Intended use is for common Aerospace Ground Equipment, Foreign Military Sales.
A-A-50762 - Signal Generator
This is a 10HZ to 10MHZ, output 3 16 volt into 50 ohm signal generator for general purpose use.
A-A-50763 - Pulse Generator
A-A-50798 - Frequency Standard, Oscillator (5Mhz, 1Mhz And 100Khz)
This description covers a frequency standard hereinafter called equipment, with outputs of 5 MHz, 1 MHz and 100 kHz.
A-A-51356 - Battery Support System
A-A-51542 - Test Set, Electronic Circuit-Component
This commercial item description covers an electronic circuit-component test set designed to test unpowered circuits and devices in maintenance support of medical equipment by detecting open circuits, short circuits, leakage and bonding problems, and unusual failure modes.
A-A-51915 - Tester, Defibrillator Energy
This commercial item description covers a defibrillator energy tester suitable for use in verifying or calibrating the output energy from all DC defibrillators.
A-A-52508 - Indicator, Voltage: Battery-Generator, 28 Volt Dc (Nominal) (Metric)
This CID covers a non-luminous battery-generator voltage indicator (voltmeter) for 28 volt (V) (nominal) direct current (dc) electrical systems.
A-A-53007 - Analyzer, Defibrillator
This commercial item description covers a defibrillator analyzer used in testing of defibrillators and accompanying monitors when present.
A-A-53098 - Calibrator, Timer
This Commercial Item Description covers a portable, battery-operated, digital, x-ray generator timer.
A-A-54099 - Battery-Charger, Medical Analyzer
This commercial item description covers a medical battery analyzer/charger for use by medical maintenance activities.
A-A-54925 - Analyzer, Middle Ear
A-A-55477 - Multimeter, Handheld, 3/23 Digit, Combination Multimeter/Oscilloscope
This CID covers the general requirements for a hand held, combination multimeter/oscilloscope which provides the functionality of a 3 2/3 digit, digital multimeter with greater than 3000 counts resolution and a 50 MHZ, 25 mega-samples per second sample rate, dual-channel digital storage oscilloscope with memory to store and recall 8 waverforms. For the purpose of this CID, multimeter/oscilloscope are referred to herein as the instrument. This instrument shall be capable of simultaneous display of the input waveform and the selected multimeter function. Instruments covered by this CID are intended for commercial/industrial applications.
A-A-55511 - Multimeter, 3 1/2 Digit, Digital Display, Hand Held
This CID covers the general requirements for a 3 1/2 digit, digital display, hand held multimeter. Multimeters covered by this CID are intended for commercial/industrial applications.
A-A-58001 - Generator, Signal, Digital Word
This Description (CID) describes a Digital Signal Generator. This CID is meant as a minimum requirement for the Digital Signal Generator in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
A-A-58002 - Generator, Function-Pulse, Electronic Test
This Commercial Item Description (CID) describes the minimum requirements for a Function Pulse Generator in which only those manufacturers meeting or surpassing the following requirements are supplied per this CID.
A-A-58008 - Test Set, Telecommunication System
This Commercial Item Description (CID) describes a Test Set, Telecommunications System (TTS). This CID is meant as a minimum requirement for the TTS in which only those manufacturers which meet or exceed the following requirements are qualified per this CID. This is a tone generator which is used to supply a signal to telephone wires for line testing and fault location.
A-A-58012 - Test Set, Interface Bus
This CID describes the minimum requirements for a Test Set, Interface Bus used to test parallel/BCD, IEEE-488, RS-232-C, and CIIL electronic test interfaces. Equipment covered by this CID will be commercially available equipment modified to the extent necessary to meet the following description.
A-A-58032 - Test Set, Electrical Power
This CID, describes a Test Set, Electrical Power. This CID is meant as a minimum requirement for the Test Set, Electrical Power in which only those manufacturers that meet or surpass the following requirements are qualified per this CID. The Test Set is to be used for making level, frequency, noise, and noise-to-ground measurements on telephone lines.
A-A-58033 - Reflectometer, Metallic, Time Domain
This Commercial Item Description (CID) describes a cable tester. This CID is meant as a minimum requirement for the cable tester in which only those manufacturers which meet or exceed the following requirements are qualified per CID. This is a portable self-contained solid state, long range cable tester that uses time domain reflectometer to identify and locate cable faults. A signal output is required to interface the cable tester with an external printer or plotter
A-A-58034 - Frequency Standard, Cesium
This CID describes a Cesium Frequency Standard. This CID is meant as a minimum requirement for the Frequency Standard in which only those manufacturers that meet or surpass the following requirements are qualified per this CID
A-A-58035 - Generator, Signal 2.0 To 8.4 Ghz
This CID describes a synthesized signal generator which operates from 2 0 GHz to 8 4 GHz and has AM, FM and pulse modulation capabilities. This is a general purpose signal generator. This CID is meant as a minimum requirement for the synthesized signal generator in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
A-A-58037 - Generator, Pulse
This CID describes a pulse generator with a delay range from 0 to 99 99 milliseconds. This CID is meant as a minimum requirement for the pulse generator in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
A-A-58039 - Voltage Standard
This CID describes a Primary DC Ratio Voltage Standard and is meant as a minimum requirement for the Voltage Standard in which only those manufacturers that meet or surpass the following requirements are qualified per this CID
A-A-58042 - Analyzer, Digital Data, Electronic Test
This CID describes a Digital Data Analyzer with a minimum of 32 channels used for collecting data acquired in the timing and state analysis modes for electronic testing. This CID outlines the minimum requirements for this analyzer which operates in the 25 to 100 Megahertz range.
A-A-58047 - Signal Generator 10 Mhz To 26.5 Ghz
This Commercial Item Description (CID) describes a 10 MHz to 26.5 GHz Signal Generator with AM, FM, pulse modulation (PM) minimum requirement for the signal generator in which only those manufacturers that meet or surpass the following requirements are qualified per this CID.
AN3065 - Probe - Ignition System Radio Noise Test
AN3066 - ( Images) Nut, Plain, Hexagon, Conduit Coupling
AN3081 - Probe & High Frequency Electric&Magnetic
AN3200 - Shunt - Ammeter, External, 50 Millivolt (S/S By Ms91586 And Ms 91587 And Ms91588)
AN3201 - ( Images) Ammeter - Direct Current
AN3202 - Voltmeter, 0-150 Volt, 400-Cycle Alternating Current (S/S By Ms24332)
AN3203 - Voltmeter&Direct Current Panel
GG-T-200 - Test Set, Battery
GG-T-796 - Tumbler, Drinking, Luminous, Plastic
IEEE-C12.1 - Electricity Metering
IEEE-C12.10 - Meters, Electromechanical Watthour
IEEE-C12.4 - Mechanical Demand Registers
JAN-S-44 - Shock&Testing&Mechanism For Electrical&Indicating Instruments (2&1-2 And 3&1-2 Inch, Round, Flush Mounting, Panel&Type) (Supersedes 72&82)
MIL-A-11052 - Absorbers, Radio Frequency Radiation (Metalized Plates)
MIL-A-11976 - Amplifier, Direct Current, Ts-580( )/U
MIL-A-12067 - Analyzer, Spectrum Ts-723/U
MIL-A-12636 - Analyzer Zm-3/U
This specification covers one type of test set, designated Analyzer ZM-3( )/U and Case, Test Set CY-1121( )/U, for measuring the essential characteristics of capacitors.
MIL-A-13252 - Attenuator, Ts&402( )/U
MIL-A-13633 - Ammeters, Direct-Current, Portable (Use Mil-M-16034)
MIL-A-14399 - Analyzer, Spectrum An/Upm-58
MIL-A-16190 - Absorbing Sheet, Radio Frequency Radiation Absorber (For Darkroom Use)
MIL-A-17045 - Audio Level Test Panel Ts-629 ()/U
MIL-A-18204 - Ammeters, Direct-Current, Split-Core, Portable
This specification cvoers split-core type ammeters capable of measuring currents in direct-current circuits without circuit interruption.
MIL-A-18252 - Analyzer, Spectrum Ts-885( )/Up
MIL-A-24366 - Amplifier System, Audio, Low Noise, High Input Impedance
MIL-A-26593 - Analyzer, Data Link Converter-Receiver Ts-1210()/Tsm
MIL-A-26742 - Amplifier And Indicator Am-570( )-Upm
MIL-A-27318 - Analyzer, Data Link Receiving Set Ts-1356-Tsm-25
MIL-A-27319 - Analyzer, Data Link Converter-Receiver Link Ts-1357-Tsmp26
MIL-A-27322 - Analyzer, Data Link Converter-Receiver Ts-1281-Tsm-28
MIL-A-27567 - Adapter, Test Mx-4419/Psm-6
MIL-A-27572 - Adapter, Test Mx-4824-Psm-6
MIL-A-27574 - Adapter, Test Mx-4825-Psm-6
MIL-A-27576 - Adapter, Test Mx-4822/Psm-6
MIL-A-27583 - Adapter, Test Mx-6049/Psm-6
MIL-A-3427 - Ammeters And Shunts, Automotive
This specification covers ammeters and one type of attaching shunt for use with the ammmeters in automotive vehicular applications.
MIL-A-38260 - Analyzer, Vibration Eau-5/E
MIL-A-38728 - Attenuator, Variable
MIL-A-38729 - Attenuators, Decade
MIL-A-38954 - Adapter, Test Mx-4419A/Psm-6
MIL-A-4887 - Antenna Position Simulator Sm-26( )-U
MIL-A-4969 - Analyzer, Spectrum An/Upm-28B
MIL-A-5125 - Ammeter, Dc, 50 Millivolts, Type J-1 (S/S By Mil-A-6752A )Asg( )Use Mil-A-6752)
MIL-A-55232 - Analyzer, Electrical Power, Alternating Current, Portable
MIL-A-722 - Analyzer, Power Circuit, Ac, Portable
This specification covers portable, alternating current power circuit analyzers capable of measuring the voltage, current, and power in single and polyphase circuits and power in single and polyphase circuits and power factor in balanced three phase, three wire alternating current circuits.
MIL-A-82116 - Analyzer Set, Engine Generator
MIL-A-8385 - Analyzer, Electrical Pulse Ip-223/Ala-S, Bench, Preflight And Flight Tests Of
MIL-A-9528 - Amplifier-Indicator Group An-Upm-49( )
MIL-A-9600 - Antenna Pattern Analyzer Group An-Urm-16( ) And Tuning Unit Options
MIL-A-9678 - Adapter, Test Ug-1127()-Gps (With Information Notice 1 Dated 2 Apr 59)
MIL-A-9998 - Analyzer, Distortion
MIL-B-10306 - Bridge, Impedance Ts-269( )/Ur
MIL-B-10818 - Battery Charger Pp-178/U
MIL-B-11664 - Battery Tester Ts-647( )/U
MIL-B-11692 - Bridge, Resistance, Zm-9( )/U
MIL-B-12630 - Bridge, Capacitance (Capacitance Bridge Ts-566) (/Ft)
MIL-B-15332 - Bridge, Impedance, Radio Frequency
MIL-B-15421 - Bridge, Capacitance-Inductance-Resistance
MIL-B-16109 - Bridge, Impedance, An/Urm-39( ) (Navy)
MIL-B-26732 - Bolometer, Radio Frequency Dt-167( )/U
MIL-B-3067 - Bridge, Resistance (Resistance Bridge, Zm-4) (1U Addendum (1))
This specification covers one type of portable, battery-operated, dial-decade Wheatstone Bridge designated as Resistance Bridge ZM-4( )/U which may be used for locating faults in communication circuits or for making resistance measurements.
MIL-B-3426 - Bench, Test, Electric, 1,500 Watts
MIL-B-3694 - Bridge Capacitance Inductance Resistance An/Arm-90
This specification covers one type of Bridge, Capacitance-Inductance Resistance, hereinafter referred to as "the equipment", that is capable of measuring resistance, capacitance, inductance, the storage factor (Q) of inductors, and the dissipation factor (D) of capacitors.
MIL-B-49194 - Bridge, Impedance Zm-78/U
This specification defines an impedance bridge capable of measuring resistance, capacitance, inductance, storage factor and dissipation factor.
MIL-B-9841 - Bench, Test, Flyaway Mockup
MIL-C-10479 - Crystal Impedance Meter Ts 683/Tsm
This specification covers one type of test set used to measure crystal units in the frequency range from 10 MHz to 149 MHz and is designated Crystal Impedance Meter TS-683( )/TSM.
MIL-C-11170 - Calibrator, Frequency (Calibrator I-240) ( )
MIL-C-11923 - Cable Assembly, Radio Frequency Cg-974( )/Dpn-19.
MIL-C-12159 - Calibrator, Frequency (Frequency Standard Ts65) (Fmq1)
MIL-C-12555 - Crystal Impedance Meter Ts-330
MIL-C-12572 - Calibrator Subassembly (Sound Calibrator Ts-550) (/G)
MIL-C-13274 - Calibrator, Frequency Fr-83( )/U
MIL-C-13884 - Calibrator, Gasoline Meter, Open Type, Trailer Mounted
MIL-C-13958 - Charger, Radiac-Detector Pp-995( )/Ud (Use Mil-C-55038)
MIL-C-13977 - Case Cy-239( )/Tsm-1 (Shipping And Storage Of Crystal Test Sets)
MIL-C-15369 - Cavity, Tuned
MIL-C-16163 - Cable Detecting Equipment Model Obb
MIL-C-16200 - Counter, Rotating, Fixed Mounting, Naval Shipboard ( )Canceled. Refer Buships( )
MIL-C-16649 - Calibrator, Bathythermograph Set-Buoyancy Recording Set, Zm-15/Bsh ( )Canceled. Refer Buships( )
MIL-C-17808 - Cavity, Tuned (Set Ts-172) (/Up)
MIL-C-17957 - Calibrator, Frequency, An/Usm-45
MIL-C-18556 - Calibrator, Magnetic, Ts-85/Asq
This equipment covered by this specification shall be a magnetic calibrator to be used as a standard reference to measure the magnetic field strength at various distances from its magnetic center in calibrating the AN/ASQ-8 equipment.
MIL-C-21624 - Comparator, Signal, (Use Mil-M-24192)
MIL-C-22066 - Calibrator, Radar Altimeter, Ts-746(*)/Apm-66
MIL-C-22330 - Calibrator Set, Radio, An/Urm-114( )
MIL-C-22364 - Calibrator Set, Range, An/Usm-115( )
MIL-C-24165 - Counter, Electronic, 500 Megacycle An/Usm-207( )
MIL-C-24189 - Counter-Timer, Electronic, Low Frequency
MIL-C-26083 - Calibrator, Range An-Upm-61 (S/S By Mil-R-4337)
MIL-C-26354 - Calibrator, Motional Pickup, Transducer, Type Ma-1, Tamper Proof
MIL-C-26595 - Control-Power Supply C-2686( )/Tsm
MIL-C-27320 - Control And Power Supply C-2841-Tsm-28
MIL-C-3221 - Cavity, Tuned (Echo Box Ts-270)(/Up)
MIL-C-4689 - Comparator, Signal An-Upm-36( )
MIL-C-49109 - Counter, Electronic, Digital Readout, Ts-3662( )(V)1/U
MIL-C-49197 - Counter, Electronic, Digital Readout 18 Gigahertz(Ghz) Continuous Wave (Cw) Td-1225 ( ) U
MIL-C-49230 - Counter Pulse, Electronic, 18 Gigahertz (Ghz) Td-1338 ()/Usm
MIL-C-55163 - Calibration Of Test And Measuring Equipment
MIL-C-55230 - Control Power Supply C-2014()/Mpq-4A (See Notice 1 For Replacement Information)
MIL-C-81583 - Cabinet, Electrical Equipment
The Electrical Equipment Cabinet covered by this specification shall be for Intermediate Level use and shall be a standard cabinet for mounting and operation of the RF Noise Analyzer, Electronic Units.
MIL-C-81925 - Control, Test Harness C-9154/Apm
The equipment covered by this specification shall be for intermediate shop use and shall facilitate the interface and test of the R-1623/APN Radar Receiver, the RT-1028/APN-202 Receiver Transmitter, the MD-817D Modulator, and the RT-763D/APN-154 (V) Receiver Transmitter.
MIL-C-82146 - Calibration Complex, Transportable
MIL-C-8666 - Calibrator, Crystal Ts-810(*)/U
MIL-C-87951 - Counter, Electronic, Digital Readout, 500Mhz Universal
MIL-C-87952 - Counter, Electronic, Digital Readout 18 Gigahertz (Ghz) Continuous Wave (Cw)
This specification covers solid state automatic 18 GHz frequency counters hereinafter called equipment.
MIL-C-87974 - Counter, Electronic, Digital Readout 26.5 Gigahertz (Ghz) Continuous Wave (Cw)
This specification covers solid state automatic microwave frequency counters hereinafter called equipment.
MIL-D-23473 - Dummy Load, Electrical, Da-242/U
MIL-D-25039 - Direction Finder Group An/Ala-6, Bench Preflight And Flight Tests Of
MIL-D-25714 - Dummy Load, Electrical, Da-163/U
MIL-D-26708 - Dummy Load, Electrical An-Urm-58
MIL-D-4739 - Dummy Load, Electrical Da&90( )-U
MIL-D-55361 - Detector, Tracking Servo Bridge
MIL-D-85331 - Digital Word Generator Performance And Interface
This document establishes the minimum performance characteristics for a commercially available Digital Word Generator (DWG). The DWG is intended for use in computer controlled test systems and specifically the hybrid test system described by MIL-H-85330 (AS). The document provides sufficient information to an offeror of a hybrid test system to integrate the DWG into his system or to provide a fit, form and functionally compatible unit with the Navy's existing inventory of DWGs.
MIL-D-85424 - Digital Word Generator (Enhanced) Performance And Interface
MIL-D-8694 - Delay Line Mx-1381/Apm-66
The equipment (part of Radar Test Set, AN/APM-66) covered by this specification shall be designed to provide a quick convenient check by means of a delay line signal, on the operation of Radar Set An/APN-22 as installed in an aircraft which is otherwise ready for flight.
MIL-DTL-16034/10 - Ammeters, Ac And Dc, Portable, 0.25-Percent Accuracy Class
MIL-DTL-16034/11 - Voltmeters, Dc, Portable, 0.25-Percent Accuracy Class
MIL-DTL-16034/12 - Ammeters, Dc, Portable, 0.25-Percent Accuracy Class
MIL-DTL-16034/13 - Voltmeters, Ac, Portable, 0.75-Percent Accuracy Class
MIL-DTL-16034/14 - Ammeters, Ac, Portable, 0.75-Percent Accuracy Class
MIL-DTL-16034/15 - Voltmeters, Dc, Portable, 0.5-Percent Accuracy Class
MIL-DTL-16034/16 - Ammeters, Dc, Portable, 0.5-Percent Accuracy Class
MIL-DTL-16034/17 - Voltmeters, Dc, Switchboard, 8.75-Inch, 250-Degree Scale
MIL-DTL-16034/18 - Ammeters, Dc, Switchboard, 8.75-Inch, 250-Degree Scale
MIL-DTL-16034/1 - Voltmeters, Dc, Switchboard, 4.5-Inch, 250-Degree Scale
MIL-DTL-16034/2 - Ammeters, Dc, Switchboard, 4.5-Inch, 250-Degree Scale
MIL-DTL-16034/3 - Voltmeters, Ac, Switchboard, 4.5-Inch, 250-Degree Scale
MIL-DTL-16034/4 - Ammeters, Ac, Switchboard, 4.5-Inch, 250-Degree Scale
MIL-DTL-16034/5 - Voltmeters, Dc, Switchboard, 6-Inch, 90-Degree Scale
MIL-DTL-16034/6 - Ammeters, Dc, Switchboard, 6 Inch, 90-Degree Scale
MIL-DTL-16034/7 - Voltmeters, Ac, Switchboard, 6-Inch, 90-Degree Scale
MIL-DTL-16034/8 - Ammeters, Ac, Switchboard, 6 Inch, 90-Degree Scale
MIL-DTL-16034/9 - Voltmeters, Ac And Dc, Portable, 0.25-Percent Accuracy Class
MIL-DTL-16034 - Meters, Electrical-Indicating (Switchboard And Portable Types), General Specification For
This specification covers switchboard and portable electrical-indicating voltmeters and ammeters, including prefixes, micro, milli, and kilo.
MIL-E-11701 - Echo Box Ts-280( )/Tps-3
MIL-E-11702 - Electronic Switch Ts-433 ( )/U
MIL-E-15354 - Electrical Test And Maintenance Tables, Table Tops, And Back Panel And Shelf Assemblies
MIL-E-15489 - Electronic Multimeter Me-6()/U
MIL-E-15867 - Electronic Micrometer Set An/Usm-19( )
MIL-E-16986 - Electronic Micrometer Set (Oil Film Thickness Indicator)
MIL-E-21384 - Electronic Control Amplifier For Searchlight Sets, An/Avq-2 Series
MIL-E-21449 - Electronic Workbench (4 Foot) And Auxiliary Table (2 Foot)
MIL-E-25433 - Electronic Shop, Truck Mounted An-Msm-20
MIL-E-4999 - Echo Box Ts-188A/Up
MIL-E-5272 - ( Images) Environmental Testing, Aeronautical And Associated Equipment, General Specification For (S/S By Mil-Std 810)
MIL-E-55294 - Engineering Report, Calibration Plan, Test Data, And Manuscripts For Technical Bulletins Of Electronic Equipment (S/S By Mil-M-63037)
MIL-E-6397 - Electrical Cable Test Set An-Upm-16( )
MIL-F-10636 - Frequency Meter An/Urm-81( ) (Use Mil-C-49109)
MIL-F-10763 - Frequency Meter Ts-175 ()/U
MIL-F-11068 - Frequency Meter Am-Upm-79
MIL-F-11069 - Frequency Meter An/Urm-80( ) (S/S By Mil-C-49109)
MIL-F-11081 - Frequency Calibrator Fr-37( )/U
MIL-F-11102 - Frequency Meter Ts-174( )/U
MIL-F-11543 - Fluxmeter Ts-15/Ap
MIL-F-11650 - Frequency Meter Fr-40( )/Gsm-1
MIL-F-13112 - Frequency Meter (Frequency Meter Set I-129-)()
MIL-F-13569 - Frequency Meter An/Urm-32 ( )
MIL-F-15242 - Frequency Meter Ts-186( )/Up
MIL-F-16179 - Frequency Calibrator Set An/Frm-3()
MIL-F-16316 - Frequency Meter, Fr-36()/U
MIL-F-18198 - Field Strength Meter, Ts-509(*)/Ur
MIL-F-21344 - Frequency Comparator Set An/Usm-73(*)
MIL-F-23604 - Frequency Synthesizer
MIL-F-23640 - Frequency Deviation Meter An/Urm-115A
MIL-F-24080 - Frequency Converter Test Set
MIL-F-24171 - Frequency Converter Test Set
MIL-F-26765 - Generator, Signal An-Urm/33A, An-Urm/33Ax
MIL-F-26843 - Frequency Standard Ts-167( )/Up
MIL-F-28734/1 - Frequency Standard, Cesium Beam, Type I Detail Specification For
MIL-F-28734/2 - Frequency Standard, Cesium Beam, Type Ii Detail Specification For
MIL-F-28734/3 - Frequency Standard, Cesium Beam, Type Iii Detail Specification For
MIL-F-28734 - Frequency Standards, Cesium Beam General Specification For
MIL-F-28811 - Frequency Standard, Cesium Beam Tube
This specification covers the performance requirements for a time and frequency standard, hereinafter referred to as the instrument, which uses a cesium beam tube resonator to stabilize the output frequency of a quartz crystal oscillator. The instrument provides an extremely high order of frequency accuracy and is capable of serving as a primary frequency reference.
MIL-F-4289 - Frequency Meter Ts-175 ( )-U
MIL-F-55171 - Frequency Meter An/Usm-159( ) (Basic Units Of)
MIL-F-55197 - Frequency Meter An/Tsm-16() (Units Of) (S/S By Mil-C-49109)
MIL-F-7847 - Frequency Meter, An/Usm-26
MIL-F-81140 - Frequency Comparator Set An/Usm-144(*)
MIL-F-83246 - Frequency Meter An/Usm-326 (Use Mil-C-87951)
MIL-G-007142 - Generator, Rf Signal Ts-622/U
MIL-G-10262 - Generator, Signal, Signal Generator Ts-497()/Urr(No S/S Document)
MIL-G-10484 - Generator, Signal An/Urm-48 ( )
MIL-G-10728 - Generator, Signal (Signal Generator Ts-155)(/Up)
MIL-G-11555 - Generator, Standard-Impulse (Electronic, Uhf, Spectrum)
MIL-G-11622 - Generator, Calibrated Voltage (For Instrument Testing)
MIL-G-12542 - Generator, Signal (Signal Generator Sg-77) (/U)
MIL-G-12629 - Generator, Pulse (Time Interval Device Ph-465-) ()
MIL-G-13214 - Generator, Signal (Square Wave Generator Ts-583)(/U)
MIL-G-14479 - Generator, Signal An/Urm-48( )Packaging Of
MIL-G-15281 - Generator, Signal, Radio Frequency (Frequency Range 10 To 50,000 Kilocycles Per Second) An/Urm-25 (S/S By Mil-G 49192 Now Mil-Prf-49192)
MIL-G-15463 - Generator, Signal, Radio Frequency (Frequency Range 4 To 405 Megacycles Per Second)
MIL-G-15473 - Generator, Signal, An/Usm-27 (Generator, Pulse, An/Usm-27)
MIL-G-15556 - Ground Detector - Submarine Propulsion Service
MIL-G-16170 - Generator, Signal, Af, Sg-21()/U
MIL-G-17994 - Generator, Signal, An/Urm-64A
MIL-G-18441 - Generator, Signal An/Arm-24
MIL-G-19660 - Generator, Signal Sg-146(*)/U
MIL-G-19945 - Generator, Signal, Video
MIL-G-19996 - Generator, Signal An/Usm-47 (Use Mil-G-17994)
MIL-G-19997 - Generator, Signal An/Usm-48(*) (Use Mil-G-17994)
MIL-G-21339 - Generator, Signal Sg-235/Aps-67
MIL-G-21489 - Gun Test Probe Aero 1A
MIL-G-21645 - Generator, Pulse Delay An/Usm-92
MIL-G-23532 - Generator, Signal Sg-376()/U
MIL-G-24069 - Generator Signal, Video An/Upm-101
MIL-G-24110 - Generator, Signal An/Urm-144 ()
MIL-G-24170 - Generator Signal, Radio Frequency Sweep
MIL-G-24173 - Generator, Pulse (200-Watt)
MIL-G-25778 - Generator, Pulse An-Awa-2
MIL-G-25782 - Generator Signal An-Prm-20
MIL-G-26447 - Generator, Signal An-Urm/92( )
MIL-G-26677 - Generator, Signal An-Urm-53
MIL-G-26683 - Generator, Signal Sg-339/Urm
MIL-G-26820 - Generator, Signal An-Urm-34A, An-Urm-34Ax
MIL-G-26821 - Generator, Signal An-Urm-35A, An-Urm-35Ax
MIL-G-26822 - Generator, Signal An-Urm-36A
MIL-G-27063 - Generator, Signal Sg-184( )/Gka
MIL-G-27154 - Generator Signal An-Urm-55
MIL-G-27155 - Generator, Signal An-Urm-56
MIL-G-27295 - Generator, Signal An-Urm-54
MIL-G-27611 - Generator, Signal An/Tsm-50
MIL-G-27724 - Generator, Signal An/Urm-127
MIL-G-28749 - Generator, Signal, Microwave
MIL-G-38700 - Generator, Sweep Frequency
MIL-G-38707 - Generator, Pulse
MIL-G-38708 - Generator, Signal 10 Cycles To 10 Megacycles
MIL-G-38712 - Generator, Signal
MIL-G-38763 - Galvanometers
MIL-G-4477 - Generator, Signal An/Gpm-5
MIL-G-49141 - Generator, Sweep Sg-677( )/U
MIL-G-49155 - Generator, Signal
This specification defines both solid-state and vacuum tube type construction, super high frequency, signal generators which furnish low power radio frequency test signals at accurately adjustable frequencies or pulse modulated. The generators are hereinafter called the equipment.
MIL-G-49193 - Generator, Signal Sg-1171/U
MIL-G-49274 - Generator, Digital Data Sg-1139 ()/G
This specification covers Generator, digital Data SG-1139 ()/G which is portable and provides a test capability for digital transmission systems and equipments under conditions of tactical deployment.
MIL-G-4933 - Generator, Signal (Signal Generator Ts-45D/U)
MIL-G-55199 - Generator, Signal Sg-299( )/U
MIL-G-55210 - Generator, Thermal Noise Sg-419( )/U
This specification covers one type of broadband, high-powered, self-contained, random noise generator designated Generator, Thermal Noise SG-419( )/U. (See 6.1 and 6.5)
MIL-G-55222 - Generator, Signal An/Urm-103() (S/S By Mil-G-49192)
MIL-G-55228 - Generator, Signal Sg-298( )/U (S/S By Mil-G-55447)
MIL-G-55272 - Test Set, Launch Control Group Oa-3874( )/Tsm-66
MIL-G-55285 - Generator, Signal Sg-400( )/U
MIL-G-55447 - Generator, Signal, Sg-321( )/U
MIL-G-55531 - Generator, Signal An/Urm-149( )
MIL-G-55569 - Generator, Signal Sg-71( )/Fcc
MIL-G-55635 - Generator, Sweep, Sg-92( )/1 (S/S By Mil-G-49141)
MIL-G-7141 - Generator, Signal, An/Urm-52A
MIL-G-7142 - Generator, Rf Signal, Ts-622/U
MIL-G-7297 - Guaifenesin Syrup, N.F. (S/S By A-A-53188)
MIL-G-7702 - Generator, Signal An/Usm-44A
MIL-G-7789 - Generator, Pulse An/Upm-55(*)
MIL-G-8337 - Generator, Signal, An-Psm-7
MIL-G-9980 - Generator, Square Wave
MIL-G-9982 - Generator, Time Mark
MIL-G-9987 - Generator, Signal
MIL-G-9997 - Generator, Signal, 450 To 1200 Megacycles
MIL-H-21435 - Test Set Mark 113 Mod 2
MIL-H-3294 - Holder, Radio Log Sheet, M-167A (Use Lll-A-650)
MIL-H-85330 - Hybrid Test System
This document establishes the minimum performance and design characteristics for a Hybrid Test System (HTS). The HTS will be used for functional and diagnostic test of analog and hybrid Units Under Test (UUTs) within a variety of weapon systems either currently in inventory or projected for subsequent introduction into inventory.
MIL-HDBK-172/1 - Electronic Tests Equipment
MIL-HDBK-172 - Electronic Test Equipment
MIL-HDBK-265 - Standard General Purpose Electronic Test Equipment Support Items (S/S By Mil-Std-1364)
This handbook identifies standard and substitute standard General Purpose Electronic Test Equipment Support Items (GSI) which have been determined to be suitable for Navy use, and for which the Space and Naval Warfare Systems Command (SPAWAR) exercises material support responsibility by management of item entry.
MIL-I-12163 - Indicator, Panoramic Ip( )/Tl And Amplifier
MIL-I-1361 - Instrument Auxiliaries, Electrical Measuring: Shunts, Resistors, And Transformers
This specification covers electrical measuring instrument auxiliaries as follows (see 6.1 and 6.2.1).
MIL-I-16103 - Indicator, Phase Sequence, Switchboard And Panel
This specification covers phase sequence indicators which indicate on polyphase alternating current (a.c.) circuits, the order in which the voltage wave in each phase reaches its maximum positive value.
MIL-I-16105 - Indicator, Voltage And Polarity, Pottable Solenoid Voltage Indicator And Polarity Indicator (Use Mil-I-23830)
MIL-I-16202 - Interference Measuring Set An/Urm-106 And An/Urm-6 ()
MIL-I-17906 - Indicator, Standing Wave Ratio (Indicator, Standing Wave, Im-81/Up)
MIL-I-19673 - Indicator, Standing Wave, Im-58()/U
MIL-I-2220 - Instruments, Electrical-Measuring, Hydrogen-Gas-Monitoring, Nonportable (Submarine Use)
This specification covers the requirements for the production and testing of nonportable hydrogen-gas monitoring systems for use on submarines.
MIL-I-23830 - Indicator, Multi-Voltage, Multi-Frequency And Polarity, Hand, Portable
This specification covers a portable multi-voltage, multi-frequency and polarity indicator.
MIL-I-25171 - Interference Limits And Tests For Modified Or Reconditioned Aircraft (Supersedes X-7290)
MIL-I-26525 - Indicator, Voltage, Battery Generator 28 Volt Dc (Nominal) (S/S By A-A-52508)
This specification covers the requirements and inspections of a battery-generator indicator, referred to herein as "indicator", utilizing a 28 volt (V) (nominal) direct current (dc) electrical system.
MIL-I-26623 - Interconnecting Groups Oa-2075( )/Tsm-23, Oa-2084( )/Tsm-24, Oa-2086( )/Tsm-22, O/A-3524( )/Tsm-22A, Oa-2087( )/Tsm-25 And Oa-2088( )/Tsm-26
MIL-I-26705 - Impedance Measuring Test Set An/Usm-6( )
MIL-I-2705 - Instruments, Electrical-Measuring Split-Core-Ammeter, Portable
MIL-I-27782 - Indicator, Equipment Malfunction Id-1214()/Fyq-9
MIL-I-38702 - Indicator, Standing Wave Ratio
MIL-I-4103 - Impedance Measuring Test Set An/Usm-7( )
MIL-I-4169 - Indicator, Standing Wave Ratio (Standing Wave Meter Ts-130A/Up)
MIL-I-4738 - Impedance Measuring Test Set An-Usm/5
MIL-I-4808 - Impedance Measuring Test Set An/Usm-11( )
MIL-I-4834 - Indicator, Standing Wave An-Usm-35( )
MIL-I-4890 - Indicator, Standing Wave An-Upm&27A
MIL-I-4929 - Impedance Measuring Test Set An-Usm-14( )
MIL-I-55075 - Indicator, Channel Alignment Id-292( )/Prc-6
MIL-I-55193 - Interconnecting Box J-982( )/Mpm-49
MIL-I-55633 - Indicator, Panoramic Ip-173( )/U
MIL-I-6268 - Radio Transmitting Set An-Arw/41, Bench, Pre-Flight, And Flight Tests Of
Changed title to upper and lower case.
MIL-I-6722 - Interference Limits, Propeller Systems Radio
MIL-I-81023 - Inductor, 28V, D. C. Laboratory Test General Specification For
MIL-I-8723 - Interrogator Set An-Apx-28, Bench, Preflight, And Flight Tests Of
MIL-I-9988 - Indicator, Digital Display (Use Mil-C-87951)
MIL-J-8093 - Junction Box J/229B-Arn-14
MIL-K-26315 - Keyer Group Oa-1326/Psm
MIL-K-26326 - Keyer Group Oa-1325/Psm
MIL-L-18270 - Load, Dummy, Ts-338(*)/Up
MIL-L-4709 - Load Bank, Type A-1
MIL-M-10127 - Meter, Field Strength (Field Strength Meter Ts-481 ) (/U)
MIL-M-10263 - Multimeter Ts-297( )-1 (Supersedes 71-5117) (Use Mil-M-4552)
MIL-M-10304/1 - Meters, Electrical Indicating, Ammeters, Dc, Basic, Panel, Type, Ruggedized (Square Flange, 1 1/2-Inch, Style 13)
MIL-M-10304/27 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Rectangular Flange, 4-1/2 Inch), Style 42
MIL-M-10304/28 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Rectangular Flange, 5-1/2 Inch), Style 52
MIL-M-10304/33 - Meters, Electrical Indicating, Panel Type Ruggedized: Voltmeter, Dc (Flush Mounting, Square Flange, 2-1/2 Inch) Style 23
MIL-M-10304/34 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Square Flange, 2-1/2 Inch), Style 23
MIL-M-10304/35 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Ac (Flush Mounting, Square Flange, 2-1/2 Inch) Style 23
MIL-M-10304/36 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Ac (Flush Mounting, Square Flange, 2-1/2 Inch) Style 23
MIL-M-10304/3 - Meters, Electrical Indicating, Ammeters, Rf, Panel Type, Ruggedized (Square Flange, 1-1/2 Inch) Styles 13 And 17
MIL-M-10670 - Monitoring Set, Telephone (Monitoring Equipment An/Pta-1())
This specification covers one type of small portable, battery operated, audio amplifier equipment intended for use in monitoring telephone transmissions on wire lines.
MIL-M-11271 - Multimeter An/Prm-15( ) And An/Prm-15( )X
MIL-M-11542 - Multimeter I-50-()
MIL-M-12135 - Multimeter An/Urm-105( )
MIL-M-13091 - Meter, Field Strength An-Urm&91( )
MIL-M-13130 - Meter, Audio Level Ts-585(/U)
MIL-M-14274 - Multiplier, Electrical Instrument Ts-265( )/Up
MIL-M-14357 - Multiplier, Electrical Instrument Mx-1472( )/U And Mx-2005( )/U
MIL-M-14626 - Meter, Field Strength (Field Strength Meter An/Urm-89) ()
MIL-M-15023 - Meter, Megohm, Insulation-Resistance-Indicating (S/S By Mil-O-16485)
MIL-M-15538 - Monitor Equipment, Frequency Shift, Oct-2( ) And Oct-3( )
MIL-M-15629 - Multimeter An/Usm-34() (Navy)
MIL-M-15796 - Meter, Audio Level Me-49/U
MIL-M-16052 - Meters, Ampere-Hour, For Submarine Use (Use Mil-M-23677)
MIL-M-16100 - Meter, Frequency Deviation, Fr-64/U
MIL-M-16125 - Meters, Electrical, Frequency
This specification covers switchboard and portable electrical frequency meters for use in presenting visually the frequency of 60 or 400 cycle per second electric power system by a marked dial and pointer.
MIL-M-16544 - Meter, Vibration Level
MIL-M-17096 - Multimeter An/Psm-4()
MIL-M-17097 - Magnetometer, Degaussing Compass Compensating
MIL-M-17275/1 - Meter, Electrical Indication, Direct Current, 1 Inch, Millivoltmeter, Panel Type, Flush Mounting, Round Flange, Styles 04, 05 And 06 (Use Mil-M-10304/29)
MIL-M-17275/2 - Meter, Electrical Indicating, Direct Current, 1 Inch, Milliameter, Panel Type, Flush Mounting, Round Flange, Styles 04, 05 And 06 (Use Mil-M-10304/30)
MIL-M-17275/3 - Meter, Electrical Indicating, Direct Current, 1 Inch, Microammeter, Panel Type, Flush Mounting, Round Flange, Styles 04, 05 And 06 (Use Mil-M-10304/31)
MIL-M-17275/4 - Meter, Electrical Indicating, Direct Current, 1 Inch, Voltmeter, Panel Type, Flush Mounting, Round Flange, Styles 04, 05 And 06 (Use Mil-M-10304/32)
MIL-M-17275 - Meter, Electrical Indicating, Direct Current, 1 Inch, General Specification For (Use Mil-M-10304)
MIL-M-18258 - Multimeter, Portable, Type Pl (Navy)
MIL-M-18420 - Meter, Watthour And Auxiliary Apparatus
MIL-M-18550 - Meter, Frequency, Rf, Lm Series
MIL-M-19261 - Meter, Power Factor 4-1/2 Inch, Switchboard Type
This specification covers 4-1/2 inch rectangular, 250 degree scale, single and polyphase, shockproof power factor meters.
MIL-M-19717 - Multimeter An/Fsm-6 (Use Mil-M-23102)
MIL-M-21250 - Magnetizer And Tester For K-Mechanisms
MIL-M-22855 - Meter, Electricalindicating, Clamp Mounting, Aircraft, General Specification For
MIL-M-23102 - Multimeter, Electronic, Precision An/Usm-116
MIL-M-23167 - Meter, Frequency, Expanded Scale Switchboard Type (Naval Switchboard Use)
This specification covers high accuracy, shockproof switchboard mounted, expanded scale frequency meters for Naval shipboard use.
MIL-M-23416 - Measuring Set, Depth-Sound Speed An/Bqh-1()
MIL-M-23677 - Meter, Ampere-Hour (Nonmercury Type)
This specification covers ampere-hour meters used to record the energy that enters or leaves a submarine storage battery.
MIL-M-23888 - Monitor, Radio Frequency Id&902A/Ar
The equipment covered by this specification shall provide means for measurement of forward and reverse r-f power and VSWR of a transmitter and shall provide a visual ON/OFF indication for associated equipment.
MIL-M-24081 - Multimeter, An/Psm-4()
MIL-M-24116 - Monitor, Voltage And Frequency, 400 Cycles A.C., Electric Power (Naval Shipboard Use)
This specification covers the general requirements for voltage and frequency monitors for Naval shipboard installation.
MIL-M-24192 - Meter, Frequency Deviation, An/Urm-115A
MIL-M-24198 - Measuring Set, Standing Wave Ratio An/Usm-37( )
MIL-M-24359 - Meter, Milliammeters, Direct Current Panel Mounting (Edgewise Types)
This specification covers panel mounted, electrical-indicating, milli-ampere, direct-current ammeters of the edgewise type.
MIL-M-24614 - Metering System, Storage Battery Current And Ampere-Hour, Digital (Metric, Nonmercury Type)
This specification covers a digital current and ampere-hour meter (AHM) system for a submarine or surface ship storage battery circuit.
MIL-M-24678 - Monitors, Motor Insul Ation Resistance, Shipboard Use (Metric)
MIL-M-24738 - Monitors, High Temperature Motor Protection
This specification establishes the design, performance, and test requirements for the motor thermal protection systems to be used in 60-hertz (Hz) and 400-Hz motors.
MIL-M-26896 - Multimeter, Hook-On (An/Usm 330)
MIL-M-28746 - Measuring Set, Radio Interference And Field Intensity
MIL-M-28942 - Multimeter, Portable, Battery Powered, An/Usm-123A
MIL-M-3138 - Multimeter An-Prm-13( )
MIL-M-3436 - Meter, Electrical Frequency, Bc-221-()
MIL-M-3823 - Meters, Electrical Indicating, Basic (Sealed, Panel Mounting Type, 11/2-Inch), And Scaleplates
MIL-M-3823/1 - Meters, Electrical Indicating, Basic (Sealed, Panel Mounting Types, 1-1/2 Inch)
MIL-M-3823/2 - Meters, Electrical Indicating, Basic (Sealed, Panel Mounting Type, 1 1/2 Inch), And Scaleplates (S/S By Mil-M-10304)
MIL-M-38483 - Multimeter An/Psm-26
MIL-M-38706 - Multimeter
MIL-M-4552 - Multimeter An/Psm-6B
MIL-M-49135 - Multimeter An/Usm-451
MIL-M-49158 - Measuring Set, Radio Interference, General Specification For
MIL-M-49158/1 - Measuring Set, Radio Interference An/Urm-201
MIL-M-49158/2 - Measuring Set, Radio Interference An/Urm-200
MIL-M-49158/3 - Measuring Set, Radio Interference An/Urm-199
MIL-M-4918 - Monitor, Phase An-Urm-67( )
MIL-M-52793 - Multimeter, Battery Testing, 0 To 35 Amp, 0 To 10 Volt
MIL-M-55088 - Multimeter, Electronic (Multimeter Ts-505/U) (See Notice 1 For Replacement Information)
MIL-M-55152 - Multimeter, General Purpose, Monelectronic
MIL-M-55204 - Module, Plug&In, Automatic Lead Selector&In&Circuit Checker For Test Set, Transistor, An/Usm & 136
MIL-M-55250 - Multimeter Ts-352( )/U (See Notice 1 For Replacement Information)
MIL-M-55254 - Multimeter Me-26( )/U (See Notice 1 For Replacement Information)
MIL-M-55336 - Maintenance Accessory Kit, Mk-1192( )/Arm (Units Of)
This specification covers one type of maintenance kit which provides accessories for trouble-shooting and bench testing of communication systems.
MIL-M-55564 - Maintenance Kit, Electronic Equipment Mk-1035( )/Arc-131 (Units Of)
MIL-M-55638 - Meter, Modulation Me-57()/U
MIL-M-55673 - Multimeter Transistor Circuitry, An/Usm-233( )/U (See Notice 1 For Replacement Information)
MIL-M-6/1 - Voltmeters, Dc, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26(No S/S Document)
MIL-M-6/10 - Voltmeters, Alternating Current, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 3-1/2 Inch), Styles 34, 35, And 36
MIL-M-6/11 - Ammeters, Alternating Current, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 3-1/2 Inch), Styles 34, 35, And 36
MIL-M-6/12 - Ammeters, Radio Frequency, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 3-1/2 Inch), Styles 34, 35 And 36 (S/S By Mil-M-10304/15)
MIL-M-6/13 - Meter, Special, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 3 1/2 Inch), Styles 34, 35, And 36
MIL-M-6/2 - Ammeters, Dc, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26
MIL-M-6/3 - Voltmeters, Alternating Current, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26
MIL-M-6/4 - Ammeters, Alternating Current, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26
MIL-M-6/5 - Ammeters, Radio Frequency, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26
MIL-M-6/6 - Meters, Special, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 2-1/2 Inch), Styles 24, 25, And 26
MIL-M-6/7 - Meter, Decibel, Panel Type (Sealed Flush Mounting, Round Flange, 3-1/2 Inch), Style 36
MIL-M-6/8 - Voltmeters, Dc, Panel Type (Sealed And Unsealed, Flush Mounting, Round Flange, 3-1/2 Inch), Styles 34, 35, And 36
MIL-M-6/9 - Ammeters, Dc, Panel Type (Sealed And Unsealed, Flush Mounting, Round, Flange, 3-1/2 Inch), Styles 34, 35, And 36
MIL-M-6 - Meters, Electrical Indication, Panel Type (2-1/2) Inch And (3-1/2) Inch General Specification For (Use Mil-M-10304)
MIL-M-83228 - Multimeter An/Usm-341, Digital, Environmental Resistant
MIL-M-83775 - Meter, Rms Rf Millivolt
MIL-M-83781 - Multimeter, Electronic An/Usm ( )
MIL-M-9536 - Meter, Modulation Me-112( )-U
MIL-M-9679 - Monitor, Radio Frequency Id-446()-Gps
MIL-M-9983 - Multimeters, Clamp-On
This specification covers portable clamp-on type multimeters capable of measuring alternating current (ac) voltage and ac current.
MIL-M-9996 - Multimeter
MIL-N-15576 - Noise Measuring Set An/Pqm-1() (Navy)
MIL-N-25384 - Navigation Set, Radar An/Apn-82, Bench, Preflight And Flight Test Of
MIL-O-11342 - Oscillator, Test (Test Oscillator Ts-47()-Apr)
MIL-O-12617 - Oscillator, Radio Frequency (Standard Oscillator Ts&384/Tsm)
MIL-O-13079 - Ohmmeter (Ohmmeter Zm-21) (/U)
MIL-O-14310 - Oscilloscope An/Usm&50( )
MIL-O-14407 - Oscilloscope Os-46( )/U, Packaging Of
MIL-O-14421 - Oscilloscope Os-48( )/U, Packaging Of
MIL-O-15287 - Oscilloscope Os-10()/U
MIL-O-15458 - Oscilloscope (Portable)
MIL-O-15525 - Oscilloscope/Os-8( )/U ((See Cancellation Notice For Replacement Information)
MIL-O-16485 - Ohmmeters, Insulation Resistance-Indicating, Portable
This specification covers portable insulation resistance-indicating ohmmeters of the hand-driven generator type for use in determining insulation resistance of electric circuits and equipment.
MIL-O-18006 - Oscilloscope An/Upm-45 ()
MIL-O-18465 - Oscilloscope An/Usm-32 ()
MIL-O-18852 - Oscillograph (For Torpedo Mark 37 Mod 0)
MIL-O-22237 - Oscilloscope, An/Usm-105( ), An/Usm-139( ), An/Usm-140( ), And An/Usm-141( )
MIL-O-23124 - Oscilloscope, 5-Megahertz, Miniature, Transistorized An/Usm-117( )
MIL-O-24311 - Oscilloscope, Portable, And Portable/Rack Mountable, 50 Megacycle
MIL-O-25633 - Ohmmeter An-Usm&21A
MIL-O-28585 - Ohmmeter, Resistance To Ground Testing, Portable
MIL-O-28727 - Oscilloscope, 15 Megahertz, Miniature, Transistorized, An/Usm-342
MIL-O-55236 - Oscilloscope Os-46( )/U And Os-5001/U (Replaced By Mil-0-23124)
MIL-O-55240 - Oscillator, Audio Frequency O-574( )/Gra
MIL-O-55251 - Oscilloscope An/Usm-81 ( )
MIL-O-7738 - Oscilloscope An/Usm-25A And An/Usm-25B
MIL-O-83225 - Oscilloscope An/Usm-338, 50 Mhz, Environmental Resistant
MIL-O-83226 - Oscilloscope An/Usm-339, 15 Mhz, Environmental Resistant
MIL-O-83227 - Oscilloscope An/Usm-340, 500 Khz, Environmental Resistant
MIL-O-83803 - Oscilloscope (An/Usm-425(V)), 100 Megahertz (Mhz), General Purpose
This specification covers solid state, general purpose, dual trace oscilloscopes modified to the extent necessary to meet the following descriptions.
MIL-O-83804 - Oscilloscope (An/Usm-426(V)), 250 Megahertz (Mhz), General Purpose
MIL-O-9960 - Oscilloscope
MIL-O-9970 - Oscilloscope, 15 Megacycle (S/S By Mil-O-83226)
MIL-O-9981 - Oscilloscope, 4 Megacycles (Use Mil-O-9970
MIL-O-9984 - Oscillator, Transfer
MIL-O-9985 - Oscilloscope, 450 Kilocycle (Use Mil-O-83227)
MIL-O-9990 - Oscillator, Wide Range
MIL-P-10339 - Packaging Of Test Equipment Ie-29 (For Overseas Shipment).
MIL-P-11165 - Packaging Of Test Set An/Mpm-2 (For Overseas Shipment).
MIL-P-11229 - Packaging Of Standard Crystal Test Set An/Tsm-3 (For Overseas Shipment).
MIL-P-11338 - Packaging Of Test Equipment Ie-9-C (For Overseas Shipment).
MIL-P-11592 - Power Meter (Power Meter Ts-125 ( )/Ap)
This specification covers a compact, battery-operated, portable radar test set designated as Power Meter TS-125( )/AP (see 6.4).
MIL-P-11890 - Packaging Of Meter Test Equipment An/Gsm-1( ) (For Overseas Shipment).
MIL-P-11909 - Packaging Of Test Set Ts-303( )/G (For Overseas Shipment).
MIL-P-11952 - Packaging Of Test Set An/Fcm-5( )
MIL-P-12302 - Packaging Of Frequency Meter Fr-67( )/U
MIL-P-18415 - Potentiometer Alignment Test Set For Use With Armament Control Director, Aero 5B, Armament Control System, Aero 13 And Aero 21B Turret System
MIL-P-22046 - Power Supply Mark 20 Mod 1
This specification establishes the requirements for the procurement of the Power Supply Mark 20 Mod 1. The power supply is used with the Test Set Mark 26 Mods 0,1, and 2 and Test Set Mark 96 Mods 0 and 1.
MIL-P-22104 - Power Supply, Test Set, Mark 111 Mod 0
MIL-P-22621 - Power Supply Pp-2315/A
MIL-P-22715 - Potentiometer Voltmeter, Hull Potential Measurement, Portable (Future Acquisitions Made Under Dod-E-24618)
MIL-P-25007 - Pulse Generator An/Ala-7, Bench, Preflight And Flight Tests Of
MIL-P-27323 - Power Supply Pp-2211( )/Tsm
MIL-P-28740 - Power Supply, Direct Current Pp-6099( )/Apx-72
MIL-P-28805 - Power Supplies, General Specification For
MIL-P-28805/1 - Power Supply, 0-150 Volts D.C., 0-15 Am
MIL-P-2896 - Protractors, Parallel-Motion, Plastic (S/S By Mil-D-3898)
MIL-P-38746 - Power Supply
MIL-P-4295 - Power Supply Pp&348( )-Arn
MIL-P-4732 - Probe, Waveguide Mx&929( )-U (Radio Frequency Probe Mx&929) (-U)
MIL-P-5177 - Pulse Tester Ts-598( )/U
MIL-P-5188 - Pulse Analyzer Group An-Apa-64A, Bench, Pre-Flight, And Flight Tests Of
MIL-P-6324 - Pulse Generator Set An-Upm-15( )
MIL-PRF-10304/10 - Meters, Electrical Indicating, Panel Type, Ruggedized: Decibel (Flush Mounting, Round Flange, 3.5 Inch) Style 36
MIL-PRF-10304/11 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Dc (Flush Mounting, Round Flange, 3.5 Inch), Style 36
MIL-PRF-10304/12 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Round Flange, 3.5 Inch), Style 36
MIL-PRF-10304/13 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Ac (Flush Mounting, Round Flange, 3.5 Inch), Style 36
MIL-PRF-10304/14 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Ac (Flush Mounting, Round Flange, 3.5 Inch), Style 36
MIL-PRF-10304/15 - Meters, Electrical Indicating, Ammeter, Rf, Panel Type, Ruggedized: (Flush Mounting, Round Flange, 3.5 Inch) Styles 36 And 38
MIL-PRF-10304/16 - Meters, Electrical Indicating, Panel Type, Ruggedized: Special (Flush Mounting, Round Flange, 3.5 Inch), Style 36
MIL-PRF-10304/17 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Round Flange, 4.5 Inch), Style 46
MIL-PRF-10304/18 - Meters, Multiscale, Dc, Panel Type, Ruggedized (Round Flange, 3.5 Inch), Style 36)
MIL-PRF-10304/19 - Meters, Electrical Indicating, Panel Type, Ruggedized: Special Decibel, (Flush Mounting, Square Flange, 1.5 Inch, Style 13)
MIL-PRF-10304/20 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter And Ammeter, Dc (Square Flange, 1 Inch), Style 03
MIL-PRF-10304/21 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Dc (Square Flange, 1.5 Inch), Style 13
MIL-PRF-10304/22 - Meters, Electrical Indicating, Panel Type, Ruggedized Voltmeter And Ammeter, Dc, Long Scale (Flush Mounting, Round Flange, 3.5 Inch), Style 34
MIL-PRF-10304/23 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter And Ammeter, Dc Long Scale (Flush Mounting, Round Flange, 4.5 Inch), Style 44
MIL-PRF-10304/24 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc, (Square Flange, 1.5 Inch), Style 13
MIL-PRF-10304/25 - Meters, Electrical Indicating, Panel Type, Ruggedized: Rectifier-Type Voltmeter, Ac (Flush Mounting, Round Flange 2.5 Inch), Style 26
MIL-PRF-10304/26 - Meters, Electrical Indicating, Panel Type, Ruggedized: Rectifier-Type Voltmeter, Ac (Flush Mounting, Round Flange, 3.5 Inch), Styles 34 And 36
MIL-PRF-10304/29 - Meters, Electrical Indicating, Panel Type, Ruggedized: Multivoltmeter, Dc (Flush Mounting, Round Flange, 1 Inch), Styles 05, 06, And 07
MIL-PRF-10304/30 - Meters, Electrical Indicating, Panel Type, Ruggedized: Milliammeter, Dc (Flush Mounting, Round Flange, 1 Inch), Styles 05, 06, And 07
MIL-PRF-10304/31 - Meters, Electrical Indicating, Panel Type, Ruggedized: Microammeter, Dc (Flush Mounting, Round Flange, 1 Inch), Styles 05, 06, And 07
MIL-PRF-10304/32 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Dc (Flush Mounting, Round Flange, 1 Inch), Styles 05, 06, And 07
MIL-PRF-10304/37 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter And Ammeter, Dc, Long Scale (Flush Mounting, Round Flange, 2.5 Inch), Style 24
MIL-PRF-10304/4 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Dc (Flush Mounting, Round Flange, 2.5 Inch) Style 26
MIL-PRF-10304/5 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Dc (Flush Mounting, Round Flange, 2.5 Inch), Style 26
MIL-PRF-10304/6 - Meters, Electrical Indicating, Panel Type, Ruggedized: Voltmeter, Ac (Flush Mounting, Round Flange, 2.5 Inch), Style 26
MIL-PRF-10304/7 - Meters, Electrical Indicating, Panel Type, Ruggedized: Ammeter, Ac (Flush Mounting, Round Flange, 2.5 Inch), Style 26
MIL-PRF-10304/8 - Meters, Electrical Indicating, Ammeters, Rf, Panel Type, Ruggedized: (Flush Mounting, Round Flange, 2.5 Inch) Style 26 And 28
MIL-PRF-10304/9 - Meters, Electrical Indicating, Panel Type, Ruggedized: Special (Flush Mounting, Round Flange, 2.5 Inch) Style 26
MIL-PRF-10304 - Meters, Electrical Indicating, Panel Type, Ruggedized, General Specification For
This specification covers the general requirements for watertight, ruggedized, 1-inch and 1.5-inch square flange, and 1-inch, 2.5 inch, 3.5-inch and 4.5-inch round flange (flush mounting), and panel type, indicating meters (see 6.1).
MIL-PRF-28800 - Test Equipment For Use With Electrical And Electronic Equipment, General Specification For
This specification covers the general requirements for test equipment (see 6.5.2.14) used in testing and calibrating electrical and electronic equipment. The test equipment may be of commercial design and includes general purpose, special purpose, peculiar, console mounted, automatic test equipment (ATE), and calibration standards. This specification should also be used for built-in test equipment (BITE) (see 6.5.2.6) when the requirements for built-in test (BIT) (see 6.5 .2.5) are not included in the system specification. Detailed requirements for particular test equipment should be tailored in a purchase description (see 6.5.2.22) for that equipment.
MIL-PRF-49136 - Countermeasures Test Set, An/Alm-178( )
This performance specification covers the requirements for construction of an AN/ALM-178 and AN/ALM-178A Countermeasures Test Sets, herein referred to as the ??CM Test Sets.??
MIL-PRF-49192 - Generator, Signal, Vhf Sg-1170/U
This specification defines a VHF Signal Generator that operates over a frequency range of 400KHz to 512 MHz and is capable of producing various signal function waveforms in the VHF spectrum, hereafter referred to as the equipment.
MIL-PRF-83287/1 - Indicators, Fault Locating, Flag Indicating, Mechanical Reset
MIL-PRF-83287/2 - Indicators, Fault Locating, Flag Indicating, Electrical Reset
MIL-PRF-83287/3 - Indicators, Fault Locating, Ball Indicating, Electrical Reset
MIL-PRF-83287/4 - Indicators, Fault Locating, Dual Drum Indicating, Mechanical Reset
MIL-PRF-83287/5 - Indicators, Fault Locating, Internal Drum Indicating, Electrical Reset, Printed Circuit Mounting
MIL-PRF-83287 - Indicators, Fault Locating, General Specification For
This specification covers fault locating indicators, which display the operational status of electrical and electronic equipment.
MIL-Q-10194 - Q-Meter Ts-617( )/U
MIL-R-10645 - Radio Interference Measuring Set (Test Set An/Urn-3) ().
MIL-R-11197 - Radio Interference Measuring Set An/Urm-7( ) Use Mil-R-55032A
MIL-R-11541 - Radio Interference Measuring Set An/Prm-14( )
MIL-R-11548 - R. F. Signal Voltmeter (Standard)
MIL-R-11704 - Resistor, Decade, Ts-679()/U
MIL-R-11729 - Resistance Bridge Zm-4( )/U (Use Specification Mil-B-3067)
MIL-R-11764 - Resistor, Decade Zm-16 ( )/U
MIL-R-11936 - Requirement For Measurement Of Spurious Radiation Of 0.55 To 100 Mc Radio Transmitters (Use Mil-Std-461)
MIL-R-15532 - Radar Test Sets An-Upm&6A() And An-Upm&6B()
MIL-R-15658 - Resistance Bridge Zm-4( )/U (S/S By Mil-R-3067)
MIL-R-15683 - Radio Interference Mesuring Set An/Urm-47()
MIL-R-16120 - Radio Test Set An/Urm-41() (Very Low Frequency Interference And Field Intensity Measuring Equipment)
MIL-R-16162 - Recording Microvoltmeter Equipment Model Obo
MIL-R-16336 - Radio Interference Measuring Set An/Urm-()
MIL-R-16624 - Radio Frequency Ohmmeter Zm-2()/U
MIL-R-16870 - Radio Interference Measuring Set, An/Urm-17 ( )
MIL-R-18274 - Reflectometer, Ts-377(*)/U
MIL-R-18428 - Radio Set An/Urn-3, Test Equipment For (Use Mil-R-19851)
MIL-R-25143 - Radio Set, An/Arc-49, Bench, Preflight, And Flight Tests Of
MIL-R-25153 - Radar Set An/Apn-59B, Bench, Post Installation, Preflight, And Flight Tests Of
This specification covers methods and procedures for accomplishing the necessary performance and operation tests on the AN/APN-59B radar set, before and after installation in the aircraft, to determine that the equipment is in proper operating condition.
MIL-R-25323 - Radar Set An-Apn&81, Bench, Preflight And Flight Test Of
MIL-R-25346 - Receiving Set, Radio An-Arn&31, Bench, Preflight And Flight Test Of
MIL-R-25396 - Radio Set, Collins Type 618S-1, Bench, Preflight And Flight Test Of
MIL-R-25461 - Range Calibrator An-Upm&71
MIL-R-25486 - Radio Set, An/Arn-21, Bench, Preflight, And Flight Tests Of
MIL-R-25544 - Receiving Set, Radio An-Arn-32, Bench, Preflight, And Flight Tests Of
This specification covers methods and procedures for accomplishing the necessary performance and operational tests on Receiving Set, Radio AN/ARN-32 to determine that the equipment, both before and after installation in an aircraft, is in proper operating condition.
MIL-R-25717 - Reliability Assurance Program For Electronic Equipment (S/S By Mil-R-27542)Usaf(
MIL-R-25776 - Reproducer, Signal Data Rp&119-Gph
MIL-R-26474 - Reliability Requirements For Production Ground Electronic Equipment (S/S By Mil-Std-785)
MIL-R-26484 - Reliability Requirement For Development Of Electronic Subsystems For Equipment (Use Mil-Std-781)
MIL-R-26667 - Reliability And Longevity Requirements, Electronic Equipment, General Specification For (S/S By Mil-Std-781)
MIL-R-26786 - Radio Set Scr&718&C, 718&D, And 718&E, Bench, Preflight And Flight Tests Of
MIL-R-27173 - Reliability Requirements For Electronic Ground Checkout Equipment
MIL-R-28910 - Radio Test Set. Ts-1325/Trc 75
MIL-R-39027/3 - Readout, Incandescent Type, Style Rpo2 ( Twelve Message Unit)
MIL-R-39027/4 - Readouts, Incandescent Type Style Rpo3 (Twelve Message Unit)
MIL-R-39027/6 - Readout, Incandescent Type, Display Area .50 Wide X .50 High Style Rp04 (Twelve Message Unit)
MIL-R-39027 - Readouts, Incandescent Type, General Specification For
MIL-R-4105 - Rf Probe Mx-1019( )-U
MIL-R-4168 - R&F Probe Mx&1020( )-U And Accessories (Supersedes 7534)
MIL-R-4329 - Relay Test Set Ts&604( )-U (Supersedes 7219)
MIL-R-4372 - Range Calibrator Set An-Upm&11A
MIL-R-4634 - Radar Test Set An/Upm-24
MIL-R-4886 - Receiving Set, Radar, An-Alr&5, Bench Preflight, And Flight Tests Of
MIL-R-4919 - Relay Test Set An-Urm-65( )
MIL-R-5155 - Radio Set An/Arw-10A, Bench, Preflight, And Flight Tests Of
MIL-R-5159 - Relay Test Set Ts-605( )-U
MIL-R-5185 - Radar Receiver An-Apr&9, Bench, Pre&Flight, And Flight Tests Of
MIL-R-5340 - Radio Control Receiving Equipment An-Arw&1C, Bench, Pre&Flight, And Flight Tests Of
MIL-R-5341 - Radio Receiving Set An-Axr&1, Bench, Pre&Flight, And Flight Tests Of
MIL-R-5343 - Radio Set An-Arr&8, Bench, Pre&Flight, And Flight Tests Of (Supersedes 7239)
MIL-R-5386 - Radio Transmitting Set, An/Arw-18A, Bench, Preflight And Flight Test Of
MIL-R-55032 - Radio Interference Measuring Set An/Urm-85( )
MIL-R-55216 - Radiosonde Test Set Ts-1348( )/Gmm-1
MIL-R-5819 - Radio Set An-Arr&15, Bench, Pre&Flight And Flight Tests Of
MIL-R-6267 - Radio Receiving Set An-Arw&40, Bench, Pre&Flight And Flight Tests Of
MIL-R-6335 - Radar Identification Set An-Apx&6 Or An-Apx&6A Bench, Preflight And Flight Tests Of (With Notice 1 Dated 21 Jan 58)
MIL-R-6372 - Radio Test Set An-Urm&30
MIL-R-6593 - Radar Beacon An-Apn&76 And An-Apn&76A, Bench, Pre&Flight And Flight Tests Of
MIL-R-6630 - Radio Receiving Set An/Urw-2, Bench, Preflight And Flight Test Of
MIL-R-7263 - Radio Receiving Set An-Arn&18, Bench, Pre&Flight And Flight Test Of
MIL-R-7630 - Radar Indicator Assembly An-Apa&11A, Bench, Pre&Flight And Flight Tests Of
MIL-R-81579 - Test Harness, Radar Beacon An/Apm-231A For Radar Beacon An/Apn-154(V)
MIL-R-81794 - Recorder Test Set Ts-3011/Gmm
The equipment covered by this specification shall be used to check the printing of the various facsimile recorders now in use by the U.S. Government. The test set shall provide a variety of test signals to the recorder being tested. The resulting printed test pattern shall determine the operating condition and capabilities of the recorder.
MIL-R-81922 - Rack, Electrical Equipment Mt-4484/Apm
MIL-R-81924 - Rack, Electrical Equipment Mt-4483/Apm
MIL-R-8560 - Radar Test Set An/Upm-9
MIL-R-8724 - Radar Test Set An-Upm-12A
MIL-R-8740 - Radio Set An-Arc&27, Bench, Pre&Flight And Flight Tests Of
MIL-R-8744 - Radar Assembly An-Apa&54A, Bench, Preflight And Flight Tests Of (Supersedes 7154)
MIL-R-8787 - Radio Compass An-Arn&6, Bench, Pre&Flight And Flight Tests Of (Supersedes 7116)
MIL-R-9368 - Radio Set An-Apn&1, Bench, Preflight, And Flight Tests Of (Supersedes 7031)
MIL-R-9991 - Resistor, Decade
MIL-R-9992 - Resistor, Decade (S/S By Mil-R-9991)
MIL-R-9993 - Resistor, Decade (S/S By Mil-R-9991)
MIL-S-10483 - Signal Generator Ts-609( )/U
MIL-S-11002 - Signal Generator I-72( )
MIL-S-11107 - Signal Generator An/Urm/-70() (S/S By Mil-G-49192, Now Mil-Prf-49192)
MIL-S-14327 - Shunt, Instrument, Multirange Mx-1471( )/U
MIL-S-15101 - Switch, Electronic
MIL-S-15293 - Simulator, Radar Signal Sm-65()/Up
MIL-S-15604 - Sonar Test Set An/Bqm-1
This specification covers the Sonar Test Set AN/BQM-1 suitable for determining the operating performance of listening sonar equipments.
MIL-S-15961 - Signal Generator Ts-535( )/U
MIL-S-16104 - Synchroscope
This specification covers switchboard-mounted synchroscopes which indicate phase angle between two alternating current (a.c.) power sources or show within limits their relative departure from synchronism.
MIL-S-17643 - Simulator, Antenna Sm-60/Asb-1
MIL-S-17644 - Simulator, Computer Sm-61/Asb-1
MIL-S-17995 - Generator, Signal, An/Urm-49A
MIL-S-18271 - Slotted Section - Probe, Ts-339(*)/Up
MIL-S-18347 - Sound Measuring Set, Mk 4
MIL-S-18414 - Synchro Alignment Test Set For Use With Armament Control Director, Aero 5B, Armament Control System, Aero 13 And Aero 21B Turret System
MIL-S-18437 - Stroboscope, Self Calibrating Ts&969 ( )/U
MIL-S-19885 - Sound Measuring Set
MIL-S-21317 - Simulator, Attitude Sm-111/Aps-67
MIL-S-23534 - Spectrum Analyzer, Ts-1379()/U
MIL-S-24186 - Sampler, Air Particle, Hd-732/Ud
This specification covers the requirements for a portable, line-operated, air particle sampler, hereinafter referred to as the sampler, for the collection of controlled samples of particulate material from the air.
MIL-S-25982 - Spectrum Analyzer Set An/Upm-84A
MIL-S-26495 - Stand, Test, Direct Current Motor Ttu-59/E
MIL-S-27109 - Simulator Set, Countermeasures Signal An/Fla-4( )
MIL-S-27110 - Simulator Antenna Position Sm-243( )/Fps-24
MIL-S-27321 - Stand, Test, Data Link Mt&2096-Tsm&28
MIL-S-28867 - Switch, Frequency Standard, Sa-2424/W
MIL-S-3151 - Sound-Level Measuring And Analyzing Equipment
This specification covers Sound-Level Measuring and Analyzing Equipment consisting of a Sound-Level Meter, an Octave-Band Analyzer and a Magnetic Tape Recorder. When used in conjunction this equipment forms a single type Sound-Level Measuring and Analyzing System.
MIL-S-4071 - Signal Generaator Set An/Usm-16 (No Superseding Document)
MIL-S-4249 - Signal Generator An/Grm-4
MIL-S-4296 - Signal Generator Sg&1( )-Arn
MIL-S-4298 - Signal Generator Sg&13( )-Arn
MIL-S-4712 - Shield, Test An-Urm-78
MIL-S-49196 - Stroboscope, Test Set Ts-805( )/U
This specification defines a portable stroboscopic tachometer with the flashing range from 110 to 150,000 flashes per minute for slow motion analysis of moving mechanism and is hereinafter called the equipment.
MIL-S-4927 - Synchro Test Set Ts-713( )/U
MIL-S-4982 - Simulator, Antanna Position Sm&67( )-G
MIL-S-55170 - Scaleplates, External (For 1 1/2 In. Basic Meters) (Use Mil-M-10304/21 Or Mil-M-10304/34)
MIL-S-55203 - Subassemblies, Plug-In, For Test Set, Transistor, An/Usm-136
MIL-S-55226 - Simulator, Antenna Position Sm-154()/Mpq-4A
This specification covers one type of antenna simulator designated Simulator, Antenna Position, SM-154() MPQ-4A which furnishes azimuth, elevation, and scanner pulses identical to those normally provided by the Radar Set AN/MPQ-4A system antenna. (see 6.4)
MIL-S-55234 - Standing Wave Ratio-Power Meter, Me-165( )/G
MIL-S-61 - Shunt, Instrument, External, 50 Millivolt (Lightweight Type) (S/S By A-A-55524)
This specification covers a light-weight type of external instrument shunt rated at 50 millivoits (my) in current ratings from 10 to 1,200 amperes, inclusive (see 6.1).
MIL-S-6989 - Superheat Meters
MIL-S-81920 - Simulator, Radar Beacon Sm-652/Apm
MIL-S-81923 - Simulator, Radar Beacon Sm-658/Apm
MIL-S-81977 - Simulator, Radar Signal Sm-697/Upq-5
The equipment covered by this specification shall be for intermediate (shop) use and shall generate simulated radar signals for fault isolation of the Display Set, Mission Recorder AN/UPQ-5 to a specific SRA.
MIL-S-83247 - Signal Generator Set An/Usm-323
MIL-S-9019 - Synchro Phasing Tester Ts&653A-Apg
MIL-S-9686 - Signal Generator Sg-136 ( )/U And Accessories
MIL-STD-124 - Voltage Of Electrical Systems In Tactical Vehicles (S/S By Mil-Std-1275)
MIL-STD-1279 - Meters, Electrical Indicating Selection And Use Of
This standard consists of the following: (a) selected standard electrical indicating meter types, detailed by sections, chosen jointly by the department of the army, the navy, and the air force for use in new design and manufacture of military equipment under the jurisdiction of the departments. (b) guides for the choice and application of electrical indicating meters in military equipment.
MIL-STD-1364 - General Purpose Electronic Test Equipment
This standard identifies standard General Purpose Electronic Test Equipment (GPETE), GPETE support Items (GSI), and General Use Portable Electrical Equipment (6UPEE) which have been determined to be suitable for Navy use and for which thellaval Sea Systems Command(NAVSEA) exercises material support responsibility by management of item entry. Thisstandard also establishes unifora procedures for submission of applicationsto procure nonstandard 6PETE.
MIL-STD-1387 - Procedures For Submission Of Application For Approval Of Nonstandard General Purpose Electronic Test Equipment (S/S By Mil-Std-1364)
This standard establishes uniform procedures for submission of nonstandard general purpose electronic test equipment (GPETE) applications.
MIL-STD-1610 - Magnetic Tape Recorder/Reproducer Formats For Asw Sensor & Systems Data
MIL-STD-2121 - Determination Of Electronic Test Equipment Parameters
This standard establishes: a, The terms to be utilized for documenting the test parameters of a weapons systems. b, A link between the parameters and the Electronic Test Equipment (ETE) required to support the weapons systems at each maintenance level. c, The functional capability required of ETE to be procured, or for comparison to know available ETE within the DOD.
MIL-STD-314 - Waterproofness Test For Use In Development Of Fuzes (S/S By Mil-Std-331)
MIL-STD-355 - Vacuum-Steam-Pressure Test For Use In Production Of Fuzes (S/S By Mil-Std-331)
MIL-STD-356 - Salt Spray (Fog) Test For Test Use In Production Of Fuzes (S/S By Mil-Std-331)
MIL-T-0012756 - Test Set, Battery (Battery Tester Ts-183 ()/U)
MIL-T-10151 - Test Set Ts-538()/U (Test Set, Radio)
MIL-T-10307 - Test Set, Radio (Test Set Ts-284)(/Ur)
MIL-T-10441 - Test Set, Electron Tube Tv&2 ( ) /U
MIL-T-10621 - Test Set, Telephone, Ts-712( )/Tcc-11
MIL-T-10731 - Test Set, Semiconductor Device (Ts-268) (U)
MIL-T-10744 - Test Set, Radio Frequency Interference An/Urm-29( ) (Components Of).
MIL-T-10790 - Test Set, Electron Tube, Tv-6( )/U
MIL-T-10819 - Timing Unit Ml-390( )/U
MIL-T-11003 - Test Set I-142( ) (S/S By Mil-T-12242)
MIL-T-11455 - Test Set, Battery Ts-737( )/U (S/S By Mil-T-55691)
MIL-T-11538 - Test Set, Electrical Meter Ts-656 ( )/U
MIL-T-11551 - Tunable Noise And Distortion Measuring Sets
MIL-T-11649 - Transmission Measuring Set Ts-707( )/U
MIL-T-11656 - Test Set, Electrical Meter Ts-682 ( )/Gsm-1
MIL-T-11754 - Tube Tester I-177-( )
MIL-T-11975 - Tube, Infrared Image Converter, Type 6032
MIL-T-12111 - Tester, Electrical Output, Firing Mechanism Range 0-70 Milliwatt-Seconds
MIL-T-12236 - Test Set, Electrical Power (Test Set 1-199)
This specification covers Test Set, Electrical Power, 1-99( ). The 1-199( ) is used to test dynamotors and hand generators. It includes two metering circuits for measuring imput and output voltages, current, and ripple measurements of dynamotors and hand generators. By means of built-in load circuits, the test set can be used to make all tests under various load conditions. The test set includes cord CD-954 ( ) (dynametor connecting cord), Cord CD-955 ( ) dynamotor connecting cord), and cord CD-999 ( ) (battery connecting cord) (see 6.3).
MIL-T-12242 - Test Set, Telephone Ts-716( )/U
This specification covers Test Set, Telephone TS-716( )/U, a portable, transistorized multi-purpose instrument designed to evaluate the electrical and acoustical performance of all types of transducers and telephone communication equipment.
MIL-T-12333 - Test Set, Crystal Unit, Quartz Ts-710/Tsm
MIL-T-12400 - Test Set, Battery Ts-776/U
MIL-T-12418 - Test Set, Electrical Cable (Test Set 1-51) ()
MIL-T-12424 - Test Set, Electron Tube Tv-7 ()/U
MIL-T-12607 - Test Set, Crystal Unit, Quartz (Standard Crystal Test Set An/Tsm-1A)
MIL-T-12622 - Test Set, Crystal Unit, Quartz (Standard Oscillator Ts-221/Tsm)
MIL-T-12628 - Test Set, Crystal Unit, Quartz (Crystal Impedance Meter Ts-537) (/Tsm) (Use Mil-T-12333)
MIL-T-12643 - Test Set, Telephone Ts-140( )/Pcm
MIL-T-12669 - Test Set Telephone (Testboard Bd-101)
MIL-T-12681 - Test Set, Telephone (Test Set Ts-190)(/U)
Test Set TS-190( )/U consists of a 1000 ohm telephone receiver with a switch controlled resistance of 50,000 ohms.
MIL-T-12756 - Test Set, Battery Tester Ts-183( )/U
This specification covers a battery test set designated as Battery Tester TS-183 ( )/U (see 6.3). It is used to determine the service-ability of dry batteries ranging in voltage rating from 1.5 volts to 200 volts.
MIL-T-12905 - Test Set, Telephone An/Ptm-3( )
MIL-T-13014 - Test Set, Ohmmeter-Continuity Light
MIL-T-14029 - Test Set, Radio An/Grm-3( )/U
MIL-T-14387 - Test Set, Radar An/Upm-60 (Units Of)
MIL-T-14480 - Test Set, Telephone (Test Set Ts-140) (/Pcm), Packaging Of.
MIL-T-15254 - Test Set Ts-147()/Up
MIL-T-15264 - Time Signal Set An/Ssq-6A
MIL-T-15326 - Tester, Battery-Water, Conductivity-Type
MIL-T-15453 - Test Set, Radar (Frequency-Power Meter Ts-230)(/Ap) (Navy)
MIL-T-15477 - Test Set, Radar, An/Upm-56
MIL-T-15559 - Test-Tool Set An/Usm-3 ()
MIL-T-15563 - Test Set, Electron Tube, Tv-10( )/U
MIL-T-15866 - Testing Equipment, Portable, Sonar, Model Ocp-2
MIL-T-16206 - Test Set, Radio (An/Prm-1) (, Portable, Lf, Mf, And Hf Radio Interference And Field Intensity Measuring Equipment)
MIL-T-16213 - Test Set, Electron Tube An/Usm-23()
MIL-T-16317 - Test Set, Infared An/Uam-2( ) (Infared Optical Tester) Design And Manufacture
MIL-T-17172 - Test Set Mark 4 Mod 1
MIL-T-17642 - Test Set, Crystal Ts-752/Asb-1 Manufacturing Specification
MIL-T-17645 - Test Set, Circuit Continuity Ts-786/Asb-1, Manufacturing Specification
MIL-T-17986 - Test Sets, Guided Missile, An/Dsm-2 Andan/Dsm-8
MIL-T-18133 - Test Set, Radar An/Upm-44B
MIL-T-18197 - Test Set, Signal Generator, An/Urm-61A
MIL-T-18200 - Test Set, Ts-59(*)/Apn-1
MIL-T-18201 - Test Set, Radar, An/Upm-33A
MIL-T-18272 - Test Set (Radio), Ts-345(*)/Art-22
MIL-T-18273 - Test Load (Radar) Ts-346(*)/Up
MIL-T-18278 - Test Set, Radar An/Apm-73
MIL-T-18346 - Truck, 2-Ton, 4 By 4, Self-Loading Mark 26 Mod 0
MIL-T-18425 - Test Set, Radar, An/Apm-72
MIL-T-18460 - Test Set, Indicator, An/Apm-74
MIL-T-18497 - Test Set, Radio An/Arm-25
MIL-T-18815 - Test Set Mark 169 Mod 0
MIL-T-18934 - Test Detecting Set, Cable An/Tsm 1167
MIL-T-19036 - Test Set, Battery (Use Gg-T-200)
MIL-T-19133 - Test Set, Circuit, Mark 286 Mod 0 (T3000), And Spare Parts
MIL-T-19134 - Test Set, Circuit, Mark 287 Mod 0 (T-3001), And Spare Parts
MIL-T-19266 - Test Set, Radar An/Upm-26
MIL-T-19331 - Test Set, Radar An/Upm-8B
MIL-T-19337 - Test Set, Amplifier, Ts-824/U
MIL-T-19361 - Test Set, Sonar, An/Wqm-3()
MIL-T-19383 - Test Set, Synchro Transmitter Mark 312 Mod 0 (For Torpedo Mark 37 Mods 0, 2, And 3)
This specification describes the requirements for the procurement of a synchro transmitter test set.
MIL-T-19408 - Test Set, Radar An-Upm-32
MIL-T-19560 - Test Bench Cable Set, An/Arm-23
MIL-T-19561 - Test Set, Radio An/Arm-27
MIL-T-19594 - Test Set, Radar An/Upm-14
MIL-T-19634 - Test Set, Radio An/Arm-28
The equipment covered by this specification shall provide facilities for bench testing of the proportional control radio receiver amplifiers of the R-602/ARW type and proportional control equipment of the KY-133/ARW-66 type.
MIL-T-19730 - Test Bench Cable Set, An/Arm-21
MIL-T-19851 - Tactical Air Navigation (Tacan) Equipment, Short Range, Test Equipment For
MIL-T-21050 - Test Set, Radio An/Urm-101
The equipment covered by this specification shall be used to perform a preflight check on Radio Set AN/ARN-21 either on the flight deck of aircraft carriers or on the ground at an air station.
MIL-T-21174 - Test Set, Underwater Mine, Mark 1 Mod 1
MIL-T-21208 - Test Set, Radio An/Arm-32
MIL-T-21244 - Test Set, Teletypewriter, Frequency Shift Converter
MIL-T-21322 - Test Points And Test Features For Navalelectronic Systems And Associated Equipment
MIL-T-21398 - Test Set, Radio, Ts-1310/Trc-27
MIL-T-21428 - Test Set, Telegraph, An/Pgm-1( )
MIL-T-21492 - Test Harness, Radar Set An/Apm-90
MIL-T-21587 - Test Set, Electron Tube (Based On Material Laboratory Model 1 Radiac Tube Tester)
MIL-T-21589 - Test Set, Timer, Mk 351 Mod 0
MIL-T-21637 - Test Set, Guided Missile Launcher An/Asm-11
MIL-T-21666 - Test Set, Mk 66 Mod 1
MIL-T-21668 - Test Set Mark 13 Mod 0
MIL-T-21669 - Test Set Mark 25 Mod 1
This specification establishes the requirements for the procurement of Test Set Mark 25 Mod 1.
MIL-T-21670 - Test Set, Underwater Mine, Mark 30 Mod 1
MIL-T-21671 - Test Set Mark 126 Mod 0
This specification establishes the requirements for the procurement of the Test Set Mark 126 Mod 0.
MIL-T-21673 - Test Set, Mk 65 Mod 1
MIL-T-21674 - Test Set Mark 177 Mod 0
This specification establishes the requirements for the procurement of Test Set Mark 177 Mod 0.
MIL-T-21675 - Test Set, Mk 137 Mod 1
MIL-T-21677 - Test Set Mark 3 Mod 2
MIL-T-21684 - Test Set Mark 96 Mod 1
This specification establishes the requirements for the procurement of Test Set Mark 96 Mod 1.
MIL-T-21700 - Test Set Mark 72 Mod 0
MIL-T-21901 - Test Set, Antenna Systems Sg-354/U
MIL-T-22047 - Test Set Mark 27 Mod 1
This specification establishes the requirements for the procurement of Test Set Mark 27 Mod 1.
MIL-T-22048 - Test Set Mark 109 Mod 0
MIL-T-22053 - Test Chamber, Radiac Detector, Ts-1189/Pd
MIL-T-22065 - Test Set, Altimeter, Ts-745(*)/Apm-66
MIL-T-22067 - Test Kit, Mk-91(*)/Apm-66
MIL-T-22147 - Test Set, Computer An/Awm-3
MIL-T-22331 - Test Set, Radar An/Upm-109(*)
MIL-T-2236 - Turbidimeter (Colorimeter)
MIL-T-22380 - Test Set, Armature And Stator (Growler) (Use Mil-T-594)
MIL-T-22465 - Test Set, Connector, T-3020
MIL-T-22466 - Test Set, Hydrostatic Switch, T-3021
MIL-T-22467 - Test Set, Monitor, T-3024
MIL-T-22469 - Test Set, Timer, T-3025
MIL-T-22495 - Test Harness, Radar, An/Apm-145D
MIL-T-22619 - Test Set, Radar An/Upm-116A
The equipment covered by this specification shall be a portable test set capable of giving a "go-no-go" check on the operation of Radar Set AN/APQ-83 or Radar Set AN/APQ-94 on the test bench or during preflight check of the aircraft.
MIL-T-22875 - Test Set Radiac Tube
MIL-T-23002 - Test Set, Radar, An/Upm-98A
MIL-T-23048 - Test Set, Photomultiplier Tube
MIL-T-23125 - Test Set, Electron Tube, Semi-Automatic An/Usm-118 ( )
This specification describes a semi-portable, semi-automatic programmed instrument for performing quantitative and qualitative measurements of electron tube characteristics under shipboard environmental conditions.
MIL-T-23159 - Test Set, Radio An/Arm-54 (*)
The equipment covered by this specification shall be for shop use and shall be capable of generating test signals required for test and alignment an AN/ARR-52 Radio Receivers.
MIL-T-23503 - Test Set, Telegraphic Distortion
MIL-T-23539 - Test Set, Doppler Radar An/Apm-148(*)
The test equipment covered by this specification shall be for flight line use and shall provide for testing and evaluation of the Navigation Set, Radar AN/APN-130(V) while the navigation set is installed in its normal operating configuration in an aircraft.
MIL-T-23544 - Test Set, Doppler Radar An/Apm-154(*)
MIL-T-23546 - Test Set, Sonar, An/Wqm-3()
MIL-T-23643 - Test Set, Target Control System An/Srm Series (An/Srm-2, An/Srm-3, An/Srm-4, An/Srm-5, And An/Srm-6)
The equipment covered by this specification shall be capable of performing all maintenance tests for Target Control Systems of the AN/SRW-4 Series.
MIL-T-23753 - Test Bench Set, Indicator Group An/Aqm-10 (*)
MIL-T-23883 - Test Set, Computer, Deviated Pursuit An/Apm-207
MIL-T-23913 - Test Set, Intercommunication Set An/A1M&3A
MIL-T-23989 - Test Set, Teletype Signal Analyzer
MIL-T-24004 - Test Set, Radio An/Drm-19
MIL-T-24140 - Tester, Portable Safety, For A.C. Receptacles And Hand Tools
MIL-T-24190 - Test Set, High Speed Polar Relays
MIL-T-24664 - Test Set, Radar, An/Upm-()
This specification covers Radar (Identification, Friend or Foe (IFF)) Test Set, AN/UPM-( ), hereinafter referred to as the equipment. The equipment is to be designed for both ship and shore installations for calibration and testing of interrogators, transponders (including diversity type transponders), and other components of the Air Traffic Control Radar Beacon System (ATCRBS) IFF MK XII System (AIMS).
MIL-T-2487 - Test Set Ts And 27( )-Tsm
MIL-T-2502 - Test Set Ts&26-Tsm (Supersedes 71&3034)
MIL-T-25181 - Test Set Ts-522-Crt-3
MIL-T-25191 - Test Equipment Ie-46-8
MIL-T-25729 - Test Set, Data Link An-Psm&10
MIL-T-25774 - Test Set, Recorder Ts-1065/Aph
MIL-T-25799 - Test Set, Radar An/Bpm-25
MIL-T-25881 - Test Set, Radio An/Usm-58A
MIL-T-25957 - Test Set, Radio Beacon An/Apm-67A
MIL-T-26106 - Test Set, Radar An/Upm-80
MIL-T-26133 - Test Set, Radar An/Upm-85
MIL-T-26246 - Test Set, Power Distribution Panel, Dc Generator Control, Type Mc&2
MIL-T-26255 - Test Set, Electronic Circuit Plug In Unit, Af/Fsm-10
MIL-T-26278 - Test Set, Amplifier Ts-1350/Tmg
MIL-T-26356 - Test Set, Electrical Power Af-M24T&1
MIL-T-26424 - Test Set, Electronic Circuit Plug&In Unit An-Fsm-11
MIL-T-26591 - Test Set, Data Link An-Tsm-22, An-Tsm-23, An-Tsm-24, An-Tsm-25, An-Tsm-26, An-Tsm-28
MIL-T-26592 - Test Set, Electronic Circuit Plug-In Unit Ts 1215/Tsm-26
MIL-T-26613 - Test Set, Data Link An/Tsm-29 () No S/S Document)
MIL-T-26690 - Test Set, Indicator Ttu-68/E, Fuel Quantity Gage, Variable Capacitance, Field
MIL-T-26738 - Test Set, Electrical Cable An&Usm&56( )
MIL-T-26760 - Test Set, Servo, Type Ma&1
MIL-T-26844 - Test Set, Radar An-Upm-68( )
MIL-T-26898 - Test Set, Airfield Lighting Systems, Type Mm-1
MIL-T-26922 - Test Set, Electrical Power A/M24T-8( )
MIL-T-26954 - Test Set, Radio An-Urm-76A
MIL-T-27121 - Transponder Set An/Tpx-37( )
MIL-T-27252 - Test Set, Synchro, Ttu&73-E Dc Selsyn, Aircraft Instruments
MIL-T-27631 - Test Set, Radio An/Urm-95
MIL-T-27761 - Test Set, Moving Target Indicator An/Upm-126( )
MIL-T-28733 - Test Set, Transistor And Diode An/Usm-206( )
MIL-T-28735 - Test Set Radar Am/Upm-137
MIL-T-28764 - Test Set, Radar, An/Upm-136( )
MIL-T-28780 - Test Set, Digital Data Distortion An/Usm-329
MIL-T-28798 - Test Set, Digital Module
MIL-T-28801 - Test Set, Sonar Noise Recorder
MIL-T-28815 - Test Set, Electronic Circuit Plug-In Unit
MIL-T-28816 - Time-Frequency Standard, Disciplined, An/Urq-23, General Specification For
This specification covers the performance requirements for a disciplined time-frequency (DTF) standard with Time Base and Frequency Control.
MIL-T-28820 - Test Set, Ts-3389, Omega Receiving Set
MIL-T-28862 - Test Set, Buoy Radio Transmitting, An/Brm-2(A)
MIL-T-28912 - Test Set, Coupler Control. Ts-1324/Ttc-75
MIL-T-28944 - Test Set, Electronic Circuit Plug-In Unit. Ts-2801/G
MIL-T-28945 - Test Set, Electronic Circuit Plug-In Unit. Ts 2802/G
MIL-T-28954 - Test Set, Radio, An/Grm-21
This specification covers the requirements for a Radio Test Set, AN/GRM-21 designed to permit testing and servicing components of Radio Set, AN/TRC-75, under operating conditions.
MIL-T-28965 - Test Set, Battery-Starter
This specification covers the requirements for one type of battery-starter test set suitable for testing 6- and 12-volt (V) storage batteries, starter-motor amperage draw, starter circuits, and switches used in 6-, 12-, and 24-V battery-starter systems.
MIL-T-29360 - Test Equipment, Data Communications Terminal An/Tyc-5A(V)
MIL-T-29402 - Test Set Ts-3354/Prc-68
This document covers the requirements for one type radio test set for testing the AN/PRC-68 Radio Set.
MIL-T-3097 - Test Set I-193
MIL-T-3101 - Test Set, Relay (Test Set, I&181&) ()
MIL-T-3484 - Test Set Ts-2/Tg, For Printing Telegraph Equipment
MIL-T-38177 - Test Set, Radio An/Arm-25A
MIL-T-38208 - Test Set, Electronic Identification System An/Upm-125
MIL-T-38218 - Test Set, Electrical Cable An/Usm-185
MIL-T-38406 - Test Set, Electronic Altimeter Set An/Apm-232
MIL-T-38422 - Test Set Group, Radio Transmitter An/Dra-6
MIL-T-38423 - Test Set, Command Link Ts-2022/Drm-23
MIL-T-38424 - Test Set, Command Link Ts-2022/Drm-23 Comparator, Frequency Cm-271/Drm-3 020566
MIL-T-38437 - Test Set, Signal Data Recorder Ttu-253/E
MIL-T-38452 - Test Set, Radio An/Arm-78
MIL-T-38752 - Test Set, Electron Tube
MIL-T-4077 - Test Set, Battery, Storage, High Discharge Rate
MIL-T-4220 - Test Oscillator Set An-Prm&10( )
This specification covers one type of test oscillator set, designated Test Oscillator Set AN/PRM-10( ), hereinafter referred to as the "oscillator".
MIL-T-4310 - Test Set Ts&23( )-Apn (Supersedes 71&1783)
MIL-T-4373 - Test Set Ts-257( )-Arw
MIL-T-4384 - Test Set Ts&16( )-Apn (Supersedes 71&1714)
MIL-T-4406 - Test Oscillator Ts&326( )-U (Supersedes 7006)
MIL-T-4466 - Test Oscillator Bc-376-M
MIL-T-4626 - Test Unit 1&201( ) (Supersedes 7151)
MIL-T-4636 - Test Set, Radio An-Apm-68
MIL-T-4679 - Test Set, Computer An-Upm-35( )
MIL-T-4687 - Tester, Capacitor-Type, Fuel-Quantity-Gage Tank Unit, Type Md-2A
MIL-T-4700 - Test Set, Antenna An-Upm-34( )
MIL-T-4704 - Test Set, Radio An-Arm-10
MIL-T-4766 - Test Set, Electrical Power, Generator Set Load Bank, Type (S/S By Mil-T-26922)
MIL-T-4778 - Tester, Capacitance Bridge, Precision, Type Me&1
MIL-T-4791 - Test Set, Insulation Breakdown, Type Md-1
MIL-T-4807 - Test, Vibration And Shock Ground Electronic Equipment (General Requirements For) (Use Mil-Std-810)
MIL-T-4888 - Test Set, Radar An-Upm&29B
MIL-T-4892 - Test Set, Radio Frequency Cable An-Urm&83
MIL-T-49053 - Test Set, Relay Ts-1775( )/U
MIL-T-49056 - Test Set, Transponder Set An/Apm-305A
This specification covers one type test set which is used in conjunction with the AN/USM-281 Oscilloscope, or equivalent, and the AN/APM-239 Transponder Bench Test Set to check, maintain, and calibrate IFF (Identification Friend-or Foe) transponders. The test set is designated Test Set, Transponder Set AN/APM-305A.
MIL-T-49057 - Test Set, Iff Interrogator An/0Tpm-25A
This specifiction covers one type test set which is used in conjunction with AN/USM-281 Oscilloscope, or equivalent, and the AN.TPM-24(V) Test Set, Test Facilities Set to check, maintain, and calibrate IFF (Identification-Friend-or Foe) Interrogators and selected IFF Test Sets. The test set covered by this specification is designated Test Set, Radar AN/TPM-25A.
MIL-T-4906 - Test Set, Radar An-Upm-25( )
MIL-T-49117 - Test Set, Receiver Ts-3565( )/Trs-2
This specification covers the equipment identified as the Test Set, Receiver TS-3565 ( )/ TRS-2.
MIL-T-49124 - Test Set, Laser Rangefinder, Ts-3620( )/Gvs-5
This specification covers the Test Set, Laser Rangefinder, TS-3620( )/GVS-5 (see 6.4).
MIL-T-49200 - Test Set, Radio, An/Usm-306( )
MIL-T-49243 - Test Set, Telephone Ts-3647( )/G
This specification covers the design, fabrication and testing necessary for the manufacture of Test Set, Telephone, TS-3647/G.
MIL-T-49269 - Test Set, Radio, An/Prm-34
MIL-T-49431 - Test Set, Electronic System An/Ukm-4() And Adapter, Test Mx-10062/U
This specification covers Test Set, Electronic System AN/UKM-4( ) and Adaptr, Test MX-10062/U, part of Test Set, Electronic Systems AN/UKM-5( ).
MIL-T-49435 - Test Set, Laser Detecting An/Upm-148( )
MIL-T-5398 - Test Unit Ts&178-Arm&1
MIL-T-5438 - Tester, Abrasion, Electrical Cable
MIL-T-5486 - Test Set, Magnetic Detector An/Asm-4
The equipment specified herein shall be a portable test set suitable for bench, preflight, and inflight testing of Detecting Set AN/ASQ-8. It shall be suitable for use in workshops and laboratories ashore and afloat, or in and around aircraft.
MIL-T-55014 - Test Set, Diode Semiconductor Device Ts-873( )/U
MIL-T-55017 - Test Set, Camera Lm&63()
MIL-T-55077 - Test Set, Electrical Cable An/Gsm-13 (Use Mil-T-55207)
MIL-T-55089 - Test Set, Battery, Ts-1078( )/G
MIL-T-55091 - Test Set, Radiosonde, Ts-1080( )/G
MIL-T-55092 - Test Set, Signal Comparator, Ts-1079( )/G
MIL-T-55095 - Test Set, Servo Modulator
MIL-T-55103 - Test Set, Electrical Power An/Upm-93( )
MIL-T-55136 - Test Set, Crystal Unit, Quartz An/Tsm&15( )
MIL-T-55202 - Test Set, Transistor, An/Usm & 136
MIL-T-55207 - Test Set, Electrical, Cable: An/Gsm-45
This specification covers a test set for use in testing various cable assemblies having 126 conductors or less by connecting both ends or only one end of the cable through a coupling medium to the test set. The test set also has the capability of testing up to six coaxial conductors including the outer conductor.
MIL-T-55208 - Test Set, Radio An/Vrm-1
MIL-T-55225 - Transmission Measuring Set T5-559( )/Ft
MIL-T-55239 - Test Set, Electronic Circuit Plug In Unit An/Grm-55( )
MIL-T-55248 - Test Set, Teletypewriter An/Ugm-1( )
MIL-T-55273 - Test Set, Launch Control, Surveillance Drone An/Tsm-66()
MIL-T-55281 - Test Set, Preflight Oa-3896()/Msm-60
MIL-T-55282 - Test Set, Guidance - Control System Oa-7111( )/Msm-60
MIL-T-55283 - Test Station, Surveillance Drone, Field Maintenance An/Msm-60( )
MIL-T-55309 - Test Set, Radio Frequency Power
MIL-T-55335 - Test Facilities Kit, Mk-1191( )/Ar (Units Of)
This specification covers one type of maintenance kit which provides facilities for troubleshooting and bench testing of communication systems and direction finding equipment. The maintenance kit is designated, Test Facilities Kit, MK-1191 ( ) / AR( ). (See 6.1 and 6.3).
MIL-T-55369 - Test Set, Radio Ts-1588( )/Aic
MIL-T-55431 - Test Set, Battery An/Psm-13( )
MIL-T-55435 - Test Set, Computer, Ts-909( )/Ppm
This specification covers one type of null detecting device used to aline and adjust 400-cycle analog computers, designated as Test Set, Computer TS-909( )/PPM.
MIL-T-55465 - Test Set, Computer An/Apm-188 Packaging And Packing Of
MIL-T-55474 - Test Set, Transponder An/Apm-123( ) Packaging And Packing Of (Use Mil-T-55605)
MIL-T-55523 - Test Fixture Sets, Electronic
MIL-T-55527 - Test Set Ts-1588/Aic Packaging And Packing Of (S/S By Mil-T-55369)
MIL-T-55547 - Test Set, Armature Ts-965/U Packaging And Packing Of (S/S By Mil-Std-726)
MIL-T-55570 - Test Set, Electronic Circuit Plug-In Unit An/Arm-87 (Units Of)
This specification covers the following units of Test Set, Electronic Circuit Plug-In Unit AN/ARM-87 ( ) which is capable of complete performance testing of each of the modules ad sub-assemblies, except the harmonic filter module, of the Receiver-Transmitter, RT-348 ( ) / ARC-54. (See 6.3)
MIL-T-55603 - Test Set, Telephone, An/Ptm-7()
This specification covers Test Set, Telephone AN/PIM-7() which is portable, self powered, and provides the facility for the field maintenance of the special purpose cable assembly CX-11230( )/G and Restorer Pulse Form TD-206( )/G connected in Pulse Code Modulation (PCM)-Time Division Multiplexer Cable Transmission Systems.
MIL-T-55605 - Test Set, Transponder An/Apm-123( ) (V)
This specification covers one type of portable go-no-go test set that performs flight line operational tests of airborne Identification Friend or Foe (IFF) transponder sets. The test set is designated Test Set, Transponder AN/APM-123( ) (V) and is intended for tri-service use. (See 6.1 and 6.6.)
MIL-T-55655 - Test Facilities Kit Mk-980( )/Pps-5
This specification covers the requirements for a portable, self contained test set for maintenance support of Radar Set AN/PPS-5 ( ).
MIL-T-55659 - Test Facilities Kit, Mk-994( )/Ar (Units Of)
This specification covers one type of Maintenance Kit which provides facilities for troubleshooting, bench testing of communications, designated, Test Facilities Kit, MK-994( ) /AR.
MIL-T-55687 - Test Set, Insulation Breakdown An/Gsm-6( )
This document covers one type of insulation breakdown test set designated as Test Set, Insulation Breakdown, AN/GSM-6( ).
MIL-T-55691 - Test Set, Battery An/Usm-63( )/U
MIL-T-5912 - Tester, Electrical Cable Harness, Portable, Type A&1
MIL-T-594 - Test Set, Armature And Stator
This specification covers the Test Sets (growlers) for locating defective circuits in armatures or stators in rotating electrical machines.
MIL-T-6349 - Test Set, Synchro
MIL-T-6350 - Tester, Synchro Instruments, Field, Type C-1
MIL-T-6907 - Test Set, Radio, An/Trm-1
MIL-T-7301 - Tester, Flux Gate, Remote Indicating Compass, Field
MIL-T-7449 - Tester, Electric Thermometer, Field, Type N-3A
MIL-T-7456 - Tester, Thermal Switch, Type X&1A
MIL-T-7775 - Test Assembly, Electric Power Equipment, Aircraft, General Specification For
MIL-T-7776 - Test Assembly, Electric Power Equipment, Aircraft, Three Phase, 18 Kw Ac, 500 Amp, 30 Volts D. C.
MIL-T-8095 - Test Set, Electrical Power, 400 Cycle Ac System, Type Ma-1
MIL-T-81134 - Test Set An/Asm-184(V)1 Aircraft Weapon Control And Test Set An/Asm-184(V)2 Aircraft Weapon Control
MIL-T-81215 - Test Set, Signal Data Converter An/Usm-153(*)
MIL-T-81223 - Test Set, Pneumatic Pressure An/Psm-15C
The test equipment covered by this specification shall be for flight line and shop use.
MIL-T-81291 - Test Set, Radio An/Prm-30
The test equipment covered by this equipment shall be for shop use and shall be suitable for troubleshooting and evaluation of the electrical capabilities of the Emergency Transmitter Beacon AN/PRT-5 and its associated power supply.
MIL-T-81308 - Test Set Group, Magnetic Detector Head, Oa-7366/Asm-3, Oa-7366A/Asm-3, And Oa-7366B/Asm-3
The test equipment covered by this specification shall be for shop use and shall provide a simulated earth's magnetic field, shielded from the actual earth's magnetic field and all other fixed and /or variable magnetic fields to the degree specified herein, for calibration of the Detecting Set, Magnetic, AR:ASQ-8 and AN/ASQ-10.
MIL-T-81426 - Test Set, Attitude Heading Reference An/Asm-293
MIL-T-81427 - Test Set, Modules An/Asm-294
MIL-T-81436 - Test Set, Electronic Circuit Plug In Unit An/Usm-146
The test equipment covered by this specification shall be for shop use and shall provide facilities specified herein for testing the performance of eleven individual Radio Set AN/ARC-80 Modules of the AN/ASQ-52.
MIL-T-81477 - Coupler, Antenna Cu-1771( )/A
MIL-T-81540 - Test Set, Computer, Weapons Release An/Asm-150
The test equipment covered by this specification shall be for shop and flight line use and shall perform operational tests on Weapons Release Computer CP-741(V)/A and related cockpit controls.
MIL-T-81541 - Test Set, Electric Circuit Plug-In Unit An/Asm-152
The test equipment covered by this specification shall be for shop use and shall be capable of checking the plug-in modules of the Weapons Release Computer CP-741 (V)/A and the associated Pilot's Control Module (Weapon Control Panel).
MIL-T-81570 - Test Set, Altimeter Warning An/Apm-254
The test set covered by this specification shall be for shop and flightline use, and shall be used to test, calibrate, and troubleshoot the Radar Altimeter Warning Set AN/APQ-107.
MIL-T-81578 - Test Set, Radar Beacon An/Apm-230A
MIL-T-81750 - Test Set, Computer An/Asm-342
MIL-T-81753 - Test Set, Computer Signal And Circuitry, An/Asm-332A
MIL-T-81760 - Test Set, Programmer An/Usm-299A
The test set covered by this specification shall be for Intermediate Level use and shall be capable of testing the functional operation and accuracy of the Programmer Group, Missile Acquisition AN/ASA-63, or AN/ASA-63A.
MIL-T-81806 - Test Set, Battery
MIL-T-81831 - Test Set, Altimeter Set An/Apm-347
The equipment covered by this specification shall be for shop use and shall provide signals and measuring devices necessary for the maintenance fo the AN/APN-141 (V) Electronic Altimeter Set.
MIL-T-81832 - Test Set, Altimeter Set An/Apm-348
The equipment covered by this specification shall be for Flight Line Test of the AN/APN-141 (V) Electronic Altimeter Set.
MIL-T-81921 - Test Set, Radar Beacon An/Apm-230B
The equipment covered by this specification shall operationally test Receiver, Radar R-1623/APN, and Beacon Sets, Radar AN/APN-202 or AN/APN-154(V).
MIL-T-81943 - Test, Radio, An/Arm-156
This specification covers one type of equipment designated as Test Set, Radio, AN/ARM-156 intended for intermediate and depot levels of use in support of AN/ARN-21, AN/ARN-52, AN/ARN-113, AN/ASQ-19, AN/ASQ-56, AN/ASQ-57, AN/ASQ-58, AN/ASQ-88, TACAN Stationkeeping, TACAN Data Link, Inverse TACAN or equivalent airborne TACAN systems.
MIL-T-81998 - Test Set, Radio Set An/Arm-165
The equipment covered by this specification shall be for shop use and shall provide the capability to perform functional tests and fault isolation on AN/ARC-159 and AN//ARC-159(V) UHF Radio Set equipments.
MIL-T-82124 - Test Set, Teletypewriter, An/Ugm-5
MIL-T-82159 - Test Set Group, Electronic Systems, An/Tgm-1
MIL-T-82160 - Test Set, Transistor. Ts-1294A/U (S/S By Mil-T-28733)
MIL-T-83038 - Test Set, Radio An/Urm-175 (Use Mil-T-27631)
MIL-T-85026 - Test Set An/Asm-475 For The An/Asx-2 Recognition Set
MIL-T-85030 - Test Set, Radio Set An/Arm-165
MIL-T-85298 - Test Set, Weapon Control, Aircraft An/Asm-184B(V)1 And An/Asm-184B(V)2
The test sets covered by this specification are for hanger deck and flight line use and perform operational and safety tests on aircraft wiring and video circuits associated with Walleye Weapons.
MIL-T-85471 - Test Set, Inertial Measuring Unit Ii, Ts 3846/Asm-608V
This specification establishes the hardware and executive software design requirements for an Inertial Measuring Unit Test Set II (IMUTS II).
MIL-T-85530 - Test Set, Tow Target, A/E24T-143
This equipment covered by this specification shall provide for electrical continuity test as follows: a. Electrical wiring provision for installation of the A/A47U-3 or A/A47U-4 Tow Target Reeling Machine Launcher System on U.S. Navy aircraft and A/A24D-2) Tow Target Control : Set on A-6E aircraft. b. Bench test of the JEK-131/A24U-21 Interconnecting Box.
MIL-T-85549 - Test Program Set (Tps) - Operational Test Program Sets (Otps) For F/A-18 Units Under Test (Uut), General Specification For
This specification defines the general requirements for performance, design, development, fabrication, integration, test, and documentation, of operational test program sets (OTPS) and test program sets (TPS) used with the F/A -18 automatic test equipment (ATE), and preparation for delivery of OTPSs.
MIL-T-85601 - Test Set, Indicator An/Apm-433
The test equipment covered by this specification shall be for shop use and shall provide an accurate means of testing the ID-2206/APN-194(V) Height Indicator when used with the AN/APM-403 Test Set, Altimeter Set.
MIL-T-8663 - Test Set, Radio An/Trm-3 (*)
MIL-T-8681 - Test Set, Detecting Set, An/Asm-3
MIL-T-9404 - Tester, Amplifier, Photoelectric Fire Detector, Type R&1
MIL-T-945 - Test Equipment, For Use With Electronic Equipment. General Specification
This specification covers the general requirements for the design and manufacture of test equipment used in testing of electronic equipment.
MIL-T-9502 - Test Set, Radar An-Upm&53()
MIL-T-9532 - Test Set, Radar An-Upm&72()
MIL-T-9538 - Test Set, Demultiplexer An-Gsm&7( )
MIL-T-9560 - Test Set, Radio Frequency Power An/Usm-68()
MIL-T-9575 - Test Set, Transponder An/Gpm-17( )
MIL-T-9698 - Test Set, Transponder An/Gpm-40( )
MIL-T-9700 - Test Set, Teletypewriter An/Ugm-3() (No Superseding Document)
MIL-U-6552 - Usaf Combat Interphone, Bench, Pre&Flight And Flight Tests Of (Supersedes 7199)
MIL-V-16601 - Volt-Ammeter, A.C., Split Core Type, Portable (S/S By Mil-M-26896)
MIL-V-17001 - Voltmeter, Electronic, Me6/U Series
MIL-V-18195 - Voltmeter, Vacuum-Tubets-487/U(No S/S Document)
MIL-V-18196 - Voltmeter Ts-375(*)/U
MIL-V-23151 - Voltmeter, Expanded Scale Switchboard Type (Naval Shipboard Use)
This specification covers high accuracy, shockproof switchboard mounted, expanded scale voltmeters.
MIL-V-23387 - Voltmeter, Degaussing, Ground Detector Unit
MIL-V-26277 - Video Distribution Amplifier Unit, Am-2722/Gpx
MIL-V-26798 - Voltmeter An/Psm-3
MIL-V-26883 - Voltmeter, 0&50-500-1000 Millivolts
MIL-V-28712 - Voltmeter, Militarized, Solid State, Dc Differential, General Specification For
This specification describes a portable solid state, differential, direct current (dc) voltmeter, housed in a military combination case, and including a high voltage devider for measurements to 15,000 volts dc.
MIL-V-4696 - Voltage Divider Ts&453-U
MIL-V-49099 - Voltmeter, Electronic An/Urm-145( )
MIL-V-55104 - Voltmeter, Electronic Me-30( )/U
MIL-V-5622 - Volt-Ammeter, Dual Pointer Direct Current
This specification covers design requirements and all performance requirements for procurement of a dual pointer direct current volt-ammeter.
MIL-V-83780 - Voltmeter, Electronic Me ( )
MIL-V-9986 - Voltmeter, Differential, Direct Current
MIL-V-9989 - Voltmeter, Differential, Direct And Alternating Current
MIL-V-9999 - Voltmeter, Electronic
This specification covers portable, solid state, alternating current (AC) voltmeters.
MIL-W-0015331 - Wattmeter An/Urm-43( ) (S/S By Mil-W-23522)
MIL-W-11559 - Wavemeter (Wavemeter, Test Set Ts-117/Gp)
MIL-W-11817 - Wattmeter, Ts-118( )/Ap
This specification covers a portable test set, designated as Wattmeter TS-118( )/AP, for measuring average radio frequency (rf) power within the frequency range of 20 Mc to 1400 Mc. (See 6.1 and 6.4).
MIL-W-12958 - Wavemeter Fr-39( )/U
MIL-W-13313 - Wire Repair-Rewind Set An/Tsm-5( ) And Associated Wire Dispenser (Use Mil-R-55411)
MIL-W-14420 - Waveguide, Slotted Line, Im&92/U Packaging Of
MIL-W-15331 - Wattmeter An-Urm&43()
MIL-W-19088 - Wattmeters, Switchboard Type, 4-1/2 Inch
This specification covers switchboard electrical indicating wattmeters including prefixes such as, kilo and mega.
MIL-W-23522 - Wattmeter, Ts-1771()/U
MIL-W-23988 - Wattmeter, 2500 Watt, Frequency Range 30 To 500 Megacycles (Use Mil-W-23522)
MIL-W-25309 - Wavemeter Ts&247()-Apm&48 (Supersedes 71&5087)
MIL-W-28984 - Wattmeter
MIL-W-3304 - Wavemeter An-Prm&19()
MIL-W-38753 - Wavemeter
MIL-W-4351 - Wavemeter An-Usm&22
MIL-W-5714 - Wattmeter Ts-305D-Up
MS15498 - Grapnel, Trip Wire (S/S By Mil-G-613)
MS18098 - ( Images) Volt-Ammeter, Dual Pointer, Direct Current
MS18227 - Interference Limits For Shipboard Installed Equipment To Be Used With Test Set T-A/Nf-105 (Use Mil-Std 1605)
MS18228 - Interference Limits For Shipboard Installed Equipment To Be Used With Test Sets (Nm-20) An/Prm-1, An/Prm-25 And (Nm-22A) An/Urm-131 (Use Mil-Std 1605)
MS21989 - Loadmeter, Direct Current, Clamp Mounted, 1.5-Inch Size, Aircraft, Integrally Lighted
MS21990 - Voltmeter, Direct Current, Clamp Mounted, 2-Inch Size, Aircraft, Integrally Lighted
MS21991 - Voltmeter, Alternating Current, Clamp Mounted, 2-Inch Size, Aircraft, Integrally Lighted
MS21992 - Ammeter, Direct Current, Clamp Mounted, 2-Inch Size, Aircraft, Integrally Lighted
MS24332 - Voltmeter, 0 To 150 Volt, 300 To 1200 Cycle Alternating Current
MS24532 - ( Images) Voltmeter, Battery-Generator, 28 Volt Dc (S/S By A-A-52508)
MS25025 - ( Images) Loadmeter, Direct Current, Aircraft
MS26531 - Vibration Test Rig (Asg)
MS27596 - Meter, Arbitrary Scale, 1 Inch, Dc, (Null Indicating)
MS35075 - Meter, Electrical Indicating, Panel Type (Type Mr36-Dc-A).
MS35076 - Meter, Electrical Indicating, Panel Type (Type Mr26-Dc-V&A).
MS35077 - Meter, Electrical Indicating, Panel Type (Type Mr26-Ac-V&A).
MS35078 - Meter, Electrical Indicating, Panel Type (Type Mr26-Rf-A).
MS35079 - Adapter (For Electric Instruments) (Type 1A25R)
MS35080 - Spacer (For Electric Instruments) (Type 1825R&35R)
MS90212 - Meter, Electric Indicator, Direct Current, 1 Inch (Use Mil-M-17275/1, Mil-M-17275/2,Mil-M-17275/3, Mil-M-17275/4)
MS90306 - Inductor, 28V Dc, Laboratory Test
MS91586 - ( Images) Shunts, Instrument, External, 50-Millivolt, Style Msa (S/S By A-A-55524/1)
MS91587 - ( Images) Shunts, Instrument, External, 50-Millivolt, Style Msb (S/S By A-A-55524/2)
MS91588 - ( Images) Shunts, Instrument, External, 50-Millivolt Style Msc (S/S By A-A-55524/3)
MS91677 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-48/U
MS91678 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-49/U)
MS91679 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-50/U)
MS91680 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-51/U)
MS91681 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-52/U)
MS91682 - Absorber, Radio Frequency Radiation (For Use With Waveguide Rg-91/U)
QPL-10304-78 - Meters, Electrical Indicating, Panel Type, Ruggedized, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-1361-38 - Instrument Auxiliaries, Electrical Measuring, Shunts, Resistors, And Transformers
QPL-16034-61 - Meters, Electrical-Indicating (Switchboard And Portable Types) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-16104-16 - Synchroscope
QPL-16125-29 - Meter, Electrical Frequency
QPL-16485-9 - Ohmmeter (Insulation-Resistance-Indicating)
QPL-17275-9 - Meter, Electrical Indicating, Direct Current, 1 Inch, General Specification For
QPL-19088-18 - Wattmeters, Switchboard Type, 4-1/2-Inch (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-19261-12 - Meter, Power Factor 4-1/2 Inch, Switchboard Type
QPL-2220-7 - Instrument, Electrical-Measuring, Hydrogen-Gas-Indicating, Nonportable (Submarine Use)
QPL-22237-16 - Oscilloscope, An/Usm-105A, An/Usm-139, An/Usm-140A And An/Usm-141
QPL-23102-7 - Multimeter, Electronic, Precision An/Usm-116
QPL-23124-15 - Oscilloscope, 5-Megahertz, Miniature, Transistorized, An/Usm-117( ) No S/S Document
QPL-23125-7 - Test Set, Electron Tube, Semi-Automatic, An/Usm-118( ) No S/S Document
QPL-23151-24 - Voltmeter, Expanded Scale Switchboard Type (Naval Shipboard Use)(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-23167-29 - Meter Frequency, Expanded Scale Switchboard Type (Naval Shipboard Use)(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-23830-17 - Indicator, Multi-Voltage, Multi-Frequency And Polarity, Hand, Portable
QPL-24165-6 - Counter, Electronic, 500 Megacycle An/Usm-207( )
QPL-24189-8 - Counter-Timer, Electronic, Low Frequency
QPL-24198-4 - Measuring Set, Standing Wave Ratio An/Usm-37( )
QPL-24311-5 - Oscilloscope, Portable, And Portable/Rack Mountable, 50 Megacycle
QPL-26246-2 - Test Set, Power Distribution Panel, Dc Generator Control, Type Mc-2
QPL-26525-4 - Indicator, Battery-Generator, 24 Volt, Direct Current
QPL-26898-1 - Test Set, Airfield Lighting Systems, Type Mm-1
QPL-28734 - Frequency Standard, Cesium Beam Tube
QPL-3823-7 - Meters, Electrical Indicating (Sealed, Panel Mounting Type, 1&1/2 Inch) And Scale Plates
QPL-38700-3 - Generator, Sweep Frequency
QPL-38702-2 - Indicator, Standing Wave Ratio
QPL-38706-8 - Multimeter
QPL-38728-2 - Attentuator, Variable
QPL-38763-4 - Galvanometer
QPL-5125-4 - Ammeter, Dc, 50 Millivolts, Type J-1
QPL-5622-6 - Volt&Ammeter, Dual Pointer Direct Current
QPL-6350-2 - Tester, Synchro Instruments, Field, Type C-1
QPL-6752-18 - Ammeters, Voltmeters, And Loadmeters; Direct Current (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-6753-14 - Voltmeters, 0-150 Volt, 330 To 1200 Cycle, Alternating Current
QPL-722-2 - Meter, Power Circuit Analyzing, Alternating Current, Portable
QPL-7449-3 - Tester, Electric Thermometer, Field, Type N-3A
QPL-7776-1 - Test Assembly, Electric Power Equipment, Aircraft, Three Phase, 18 Kw Ac, 500 Amp, 30 Volts D. C.
QPL-83287-24 - Indicators, Fault Locating, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8371-3 - Ammeter, Direct Current, 500 Millivolts Type G-1
QPL-8375-1 - Ammeter, Ac, 0-250 Amps, Type H-1
QPL-8376-1 - Voltmeter, Ac, 0-250V, Type C-1
QPL-8377-1 - Watt-Varmeter, Alternating Current, Type A-1 (400 Cycle-Aircraft)
QPL-8378-5 - Frequency Meters, Aircraft 380 To 420 Hertz & 350 To 450 Hertz
QPL-9960-10 - Oscilloscope
QPL-9970-5 - Oscilloscope
QPL-9981-1 - Oscilloscope, 4 Megacycles
QPL-9982-6 - Generator, Time Mark
QPL-9983-10 - Multimeters, Clamp-On
QPL-9984-1 - Oscillator, Transfer
QPL-9985-4 - Oscilloscope, 450 Kilocycles
QPL-9986-4 - Voltmeter, Differential, Direct Current
QPL-9987-6 - Generator Signal
QPL-9988-6 - Indicator, Digital Display (Use Mil-C-87951)
QPL-9989-5 - Voltmeter, Differential, Direct And Alternating Current
QPL-9990-4 - Oscillator, Wide Range
QPL-9991-5 - Resistor, Decade
QPL-9996-7 - Multimeter
QPL-9999-7 - Voltmeter, Electronic
UL1437 - Analog, Electrical, Instruments - Panel Board Types
These requirements cover electrical and electrically operated indicating and recording instruments of the analog type that are powered only from the measureed parameter and are intended for ordinary use in panel boards and the like.
W-M-00780 - Multimeter
W-M-780 - Multimeter
W-O-725 - Oscilloscope, For General Purpose Use, General Specification For
W-O-730 - Oscilloscope, General Purpose, 3Inch, Dc&2Mc (Type1)
W-O-735 - Oscilloscope, General Purpose, 3 Inch, 10 Cps&4Mc (Type1)
W-O-740 - Oscilloscope, General Purpose, 5&Inch, Dc,1&5Mc (Type&1)
W-O-745 - Oscilloscope, General Purpose, 5&Inch, Dual Trace, Dc, 24Mc (Type 2)
W-T-231 - Tester, Capacitor (Condenser), Electric, Ignition
2>
MIL-C-55302/114 - Connectors, Printed Circuit Subassembly And Accessories: Receptacle, Socket Contact, For Printed Circuit Boards And Solderless Wrap (.100 Inch Contact Spacing) 12, 16, 20, 28, 40, 60, 80, And 100 Contact Positions
MIL-C-55302/115 - Connectors,Printed Circuit Subassembly And Accessories: Plug, Right-Angle, Pin Contacts, For Printed Circuit Boards, (.100 Inch Contact Spacing), 12, 16, 20, 28, 40, 60, 80, And 100 Contact Positions
MIL-C-55302/116 - Connectors, Printed Circuit Subassembly And Accessories: Keying Methods
MIL-C-55302/129 - Connectors, Printed Circuit Subassembly And Accessories: Plug, Right Angle, 90 Through 240 Contact Positions, For Printed Wiring Boards (.100 Inch Spacing)
MIL-C-55302/12 - Connector, Printed Circuit Subassembly And Accessories, Plug, Straight-Thru, 31 Composite Contact, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/132 - Connectors, Printed Circuit Subassembly And Accessories: Receptacle Socket Contacts, Straight Thru, 64 Or 96 Contact Positions, For Printed Wiring Boards (.100 Inch Spacing)
MIL-C-55302/135 - Connectors, Printed Circuit Subassembly And Accessories: Plug, Right Angle, Pin Contacts, 12, 16, 20, 28, 40, 60, 70, 80, 100, And 130 Contact Positions, For Printed Wiring Boards (.100 Inch Spacing)
MIL-C-55302/136 - Connectors, Printed Circuit Subassembly And Accessories: Receptacle,
Socket Contacts, In-Line, for Printed Wiring Boards (.100 Inch Contact Spacing) 12, 16, 20, 28, 40, 60, 80, 100, and 130 Contact Positions
MIL-C-55302/137 - Connectors, Printed Circuit Subassembly And Accessories: Plug, Pin Contacts Straight-Thru, For Multilayered Printed Wiring Boards (.100 Spacing)(No S/S Document)
MIL-C-55302/13 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, Right Angle, 31 Composite Contact, For Printed Boards (.150 Spacing)
MIL-C-55302/14 - Connector, Printed Circuit Subassembly And Accessories, Plug, Straight-Thru, 41 Composite Contact, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/15 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, Right Angel, 41 Composite Contact, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/165 - Connector, Printed Circuit Subassembly And Accessories Plug, Straight-Thru, Double Row, For Standards Printed Wiring Boards (1/16 Inch, 3/32
Inch, 1/8 Inch Thick) (.100 Spacing). Connectors Are 50, 60, 80, 100, 120 Contact Positions
MIL-C-55302/28 - Connector, Printed Circuit Subassembly And Accessories, Tool, Contact, For Removable Type Connector Contacts (S/S By Mil-I-81969/9)
MIL-C-55302/33 - Connector, Printed Circuit Subassembly And Accessories. Receptacle, Electrical, Polarized Shell, Female 0.156 Inch Contact Spacing, Solder Terminals
MIL-C-55302/34 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, Electrical, Polarized Shell, Female, 0.156 Inch Contact Spacing, Pin Terminal
MIL-C-55302/35 - Connector, Printed Circuit Subassembly And Accessories. Plug, Electrical, Polarized Shell, Male, 0.156 Inch Contact Spacing, Pin Terminal
MIL-C-55302/36 - Connectors, Printed Circuit Subassembly And Accessories: Receptacle, Electrical, Polarized Shell, Female, 0.100 Inch Contact Spacing, Solder Terminals
MIL-C-55302/37 - Connectors, Printed Circuit Subassembly And Accessories: Receptacle, Electrical, Polarized Shell Female, 0.100 Inch Contact Spacing, Pin Terminal
MIL-C-55302/39 - Connector, Printed Circuit Subassembly And Accessories, Shields, Electrical Connector Shield, For Attachment To Receptacles, 0.156 Inch Contact Spacing
MIL-C-55302/3 - Connector, Printed Circuit Subassembly And Accessories. Pin Straight-Thru, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/40 - Connector, Printed Circuit Subassembly And Accessories, Shields, Electrical Connector Shield, For Attachment To Receptacles, 0.100 Inch Contact Spacing
MIL-C-55302/41 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, Electrical, Polarized Shell, Female, 0.156 Inch Contact Spacing, Removing Crimp Contacts
MIL-C-55302/43 - Connectors, Printed Circuit Subassembly And Accessories, Plug, Right-Angle, For Printed Wiring Boards (.100 Inch Contact Spacing) (14 And 28 Contacts)
MIL-C-55302/44 - Connector, Printed Circuit Subassembly And Accessories Receptacle, Straight-Thru, For Printed Wiring Boards, Solderless Wrap, (.100 Inch Contact Spacing) (14 And 28 Contacts)
MIL-C-55302/45 - Connector, Printed Circuit Subassembly And Accessories, Plug, Right-Angle, For Printed Wiring Boards (.100 Inch Contact Spacing) (28, 42 And 56 Contacts)(No S/S Document)
MIL-C-55302/46 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, Straight Thru, For Printed Wiring Boards (.100 Inch Contact Spacing)(28, 42, And 56 Terminals)
MIL-C-55302/47 - Connector, Printed Circuit Subassembly And Accessories, Pin, Right, Angel, For Multilayered Printed Wiring Boards (.100 Inch Contact Spacing) (56 And 112 Contacts)
MIL-C-55302/48 - Connector, Printed Circuit Subassembly And Accessories. Socket, Straight Thru, For Multilayered Printed Wiring Boards (.100 Inch Contact Spacing) 56 And 112 Contacts
MIL-C-55302/49 - Connector, Printed Circuit Subassembly And Accessories, Key, Plug, Connectors, Electrical,Printed Wiring Boards
MIL-C-55302/50 - Connector, Printed Circuit Subassembly And Accessories. Key, Polarizing, Connector, Electrical, Printed Wiring Boards
MIL-C-55302/51 - Connector, Printed Circuit Subassembly And Accessories, Card Guide For Socket Mounting, For Multilayered Printed Wiring Boards
MIL-C-55302/79 - Connector, Printed Circuit Subassembly And Accessories, Tool, Contact, For Inserting And Removing (S/S By Mil-I-81969/8)
MIL-C-55302/80 - Connector, Printed Circuit Subassembly And Accessories, Plug, Right-Angle, 45 Contacts, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/81 - Connector, Printer Circuit Subassembly And Accessories. Plug, Right-Angle, 45 Contacts, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/85 - Connectors, Printed Circuit Subassembly And Accessories: Keying Plug
MIL-C-55302/86 - Connector, Printed Circuit Subassembly And Accessories, Tool, For Inserting And Removing Contact (S/S By Mil-I-81969/10)
MIL-C-55302/87 - Connector, Printed Circuit Subassembly And Accessories. Plug, Right Angle, 36 Contacts, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/88 - Connector, Printed Circuit Subassembly And Accessories, Receptacle, 36 Contacts, For Printed Wiring Boards (.150 Spacing)
MIL-C-55302/9 - Connector, Printed Circuit Subassembly And Accessories. Male, Right- Angle, Subminiature
MIL-C-55449 - Connector, Plug, Electrical U-237( )/G Connector, Receptacle, Electrical U-238( )/G
This specification covers two types of electrical power connectors designated as Connector, Plug, Electrical U-237 ( )/G and Connector, Receptacle, Electrical U-238 ( )/G. They are used to supply electrical power to area-type communications systems.
MIL-C-55459 - Connector, Plug, Electrical U-226( )/G
MIL-C-55482 - Connector, Plug, Electrical U-292 And 293()/U
MIL-C-55544/10 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle Cable Conductor, Cylindrical, Flange Mount (Flat Cable Wire)
MIL-C-55544/12 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Cable Conductor, Bulkhead, Cylindrical, Flange Mount (Flat Cable)
MIL-C-55544/14 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Cable Conductor, Cylindrical, Jam Nut Mount (Flat Cable Wire)
MIL-C-55544/16 - Connector, Electrical Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Cable Conductor, Bulkhead, Cylindrical, Jam Nut Mount (Flat Cable)
MIL-C-55544/17 - Connector, Electrical, Plug, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire, Removable Wafers (Potted), Flat, Backshell
MIL-C-55544/18 - Connector, Electrical, Receptacle, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire, Removable Wafers (Potted), Flat, Backshell
MIL-C-55544/19 - Connector, Electrical, Plug, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire, Removable Wafers (Potted), Round Backshell
MIL-C-55544/1 - Connector, Electrical, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire Plug, Socket Contact, Grommet Seal (Flat Conductor Cable)
MIL-C-55544/20 - Connector, Electrical, Receptacle, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire, Removable Wafers (Potted), Round, Backshell
MIL-C-55544/22 - Connector, Electrical, Receptacle, Environment, For Use With Flexible Flat Conductor Cable And Round Wire, Removable Wafers, Removable Wafers (Potted), Box Backshell
MIL-C-55544/23 - Connector, Electrical, Receptacle, Environment Resistant, For Use With Flexible Flat Conductor Cable, Interfacial Seal
MIL-C-55544/24 - Connector, Electrical, Receptacle, Environment Resistant, For Use With Flexible Flat Conductor Cable, Interfacial Seal
MIL-C-55544/25 - Connector, Electrical, Plug, Environment Resistant, For Use With Flexible Flat Conductor Cable
MIL-C-55544/2 - Connector, Electrical Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Pin Contact, Grommet Seal (Round Wire)
MIL-C-55544/3 - Connector, Electrical, Environment Resistant, For Use With Flexible Flat Conductor Cable And Round Wire Plug, Socket Contact, Grommet Seal, Shielded (Flat Conductor Cable)
MIL-C-55544/4 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Pin Contact, Grommet Seal, Shielded (Round Wire)
MIL-C-55544/5 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor, Premolded (Flat Cable))
MIL-C-55544/6 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Cable Conductors, Potted (Flat Cable Wire)
MIL-C-55544/7 - Connector, Electrical Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Plug, Cable Conductor Molded On (Flat Cable)
MIL-C-55544/8 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle Bulkhead (Flatcable)
MIL-C-55544/9 - Connector, Electrical, Environment Resistant For Use With Flexible Flat Conductor Cable And Round Wire Receptacle, Cable Conductor, Cylindrical Flange Mount (Flat Cable Wire)
MIL-C-55544 - Connector, Electrical, Environment Resistant, For Use With Flexible Flat Conductor And Round Wire, General Specification For
MIL-C-6100 - Connector, Receptacle, Electrical, Aircraft
The receptacles covered by this specification shall be designed for aircraft applications. The receptacle shall be a two-win connector designed to mate with plug Bureau of Ordnance Drawing No. 454642, or equivalent, by a spring twist-lock action, and shall be furnished with two MIL-W-5086/1 cables, attached and identified as ??GND?? and "+?? respectively. Both leads shall be terminated in MS25181-2 permanent splices, or equivalent.
MIL-C-71 - Connector, Coaxial, Radio Frequency, Series N And Associated Fittings (Use Mil-C-39012)
MIL-C-7974/3 - Connector, Plug, Attachable, External Electric Power, Aircraft, Single-Jacketed Cable Assemblies, 115/200 Volt, 400 Hertz (S/S By Sae-As7974/3)
MIL-C-81511/10 - Insert Arrangement, Electric Connector, Shell Size 14 (Use Ms3426)
MIL-C-81511/11 - Insert Arrangement, Electric Connector Size 16 (Use Ms3429)
MIL-C-81511/12 - Insert Arrangements, Electric Connector, Shell Size 18 (Use Ms3430)
MIL-C-81511/13 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, F Adapter, Rotable, Type I (Series 1 Or 2)
MIL-C-81511/14 - Connector, Adapter, Straight, Electric
MIL-C-81511/15 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting; And Accessories: Plug, Sealing Contact (Series 1 Or 2)
MIL-C-81511/16 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Cap, Protective Locking
MIL-C-81511/17 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories Cover, Protective, Plug (Series 2)
MIL-C-81511/18 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Cover, Protective, Receptacle (Series 1 Or 2)
MIL-C-81511/19 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories Receptacle, Dummy Stowage, For Series 2 Connectors
MIL-C-81511/1 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: And Accessories, Receptacle, Flange Mount Crimp Type Contacts, Class A, F And E (Series 2)
MIL-C-81511/20 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories Nut, Slotted Hexagon, Connector Mounting, For Series 1 And 2 Connectors
MIL-C-81511/21 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories: Receptacle, Flange Mount, Crimp-Type Contacts, Class A, F And E (Series 1)
MIL-C-81511/23 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories: Receptacle, Jam Nut Mount, Crimp-Type Contacts, Class A, F, And E (Series 1)
MIL-C-81511/25 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories: Receptacle, Cable Connecting, Crimp-Type Contacts, Class A, F, And E (Series 1)
MIL-C-81511/26 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories: Plug, Crimp-Type Contacts, Class A, F, And E (Series 1)
MIL-C-81511/28 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Receptacle, Jam Nut Mount, Through Bulkhead, Nonremovable Contacts, Class B, G And H (Series 2)
MIL-C-81511/29 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Cover, Protective, Plug (Series 1)
MIL-C-81511/2 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: And Accessories, Receptacle, Solder Mount, Solder Type Contacts, Pins Only, Class B, G, And H (Series 2)
MIL-C-81511/33 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Receptacle, Cable Connecting, Crimp Type Contacts, Class C, T, And P (Series 2)
MIL-C-81511/34 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories: Plug, Crimp-Type Contacts, Class C, T And P (Series 2)
MIL-C-81511/35 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Receptacle, Flange Mount, Crimp Type Contacts, Class C, T, And P (Series 1)
MIL-C-81511/36 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Receptacle, Jam Nut Mount, Crimp Type Contacts, Class C, T And P (Series 1)
MIL-C-81511/37 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Receptacle, Cable Connecting, Crimp Type Contacts, Class C, T And P (Series 1) (S/S By Mil-Std-1353)
MIL-C-81511/3 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: And Accessories And Accessories, Receptacle, Jam Nut Mount, Crimp-Type Contacts, Class A, F And E (Series 2)
MIL-C-81511/41 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle, Flange Mount, Individual Release, Crimp Type Contacts, Class A, F And W (Series 3)
MIL-C-81511/43 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, J Adapter, Non-Rotatable Type I Ii Iii (Series 1/2) F/Attaching R-Fi And Non-Rfi Cable To Connectors
MIL-C-81511/44 - Connector, Insert Arrangements, Electric Connector, Shell Size 20 Connector, Insert Arrangements, Electric Connector, Shell Size 20 (Use Ms3431)
MIL-C-81511/45 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle, Cable Connecting, Individual Release, Crimp Type Contacts, Class A, F And W (Series 3)
MIL-C-81511/46 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: Plug, Individual, Release, Crimp-Type Contacts, Class A, F, And W (Series 3)
MIL-C-81511/49 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle,Jam Nut Mount, Individual Release, Crimp Type Contacts Class A, F And W (Series 3)
MIL-C-81511/4 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: And Accessories, Receptacle, Jam Nut Mount, Solder Type Contacts, Pins Only,Class B, G And H (Series 2)
MIL-C-81511/51 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle, Flange, Mount, Individual Release, Crimp Type Contacts Class A, F And W (Series 4)
MIL-C-81511/53 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle, Jam Nut Mount, Individual Release, Crimp-Type Contacts, Class A, F And W (Series 4)
MIL-C-81511/55 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Receptacle, Cable Connecting, Individual Release, Crimp Type Contacts, Class A, F And W (Series 4)
MIL-C-81511/56 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, Plug, Individual Release, Crimp-Type Contacts, Class A, F And W (Series 4)
MIL-C-81511/5 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories, Plug, Cable Connecting, Crimp-Type Contacts, Class A, F And E (Series 2)
MIL-C-81511/6 - Connector, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting And Accessories, Plug, Crimp Type Contacts, Class A, F And E (Series 2)
MIL-C-81511/7 - Connector, Receptacle, Flange Mount, Through Bulkhead Nonremovable Contacts, Pin Only, Class H
MIL-C-81511/8 - Connector Insert Arrangement, Electric Connector, Shell Size 8 (Use Ms3425)
MIL-C-81511/9 - Insert Arrangements, Electric Connector, Shell Size 10 (Use Ms3426)
MIL-C-81511 - Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: And Accessories General Specification For
This specification covers four series of electrical connectors (plugs and receptacles ) with removable crimp and nonremovable solder contacts and accessories (see 6.1).
MIL-C-81582/10 - Connector, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, Dummy Stowage Receptacle (S/S By Sae-As81582/10)
MIL-C-81582/1 - Connector, Electric, Bayonet Coupling, Umbilical Receptacle, Jam Nut Mounting, Rfi Shielded, Crimp Contact, Class E (S/S By Sae-As81582/1)
MIL-C-81582/2 - Connector, Plug, Electric, Bayonet Coupling, Lanyard Release, Rfi Shielded, Crimp Type Contacts, Class E (S/S By Sae-As81582/2)
MIL-C-81582/3 - Insert Arrangement, Electrical Connector S/S By Mil-Std-1672
MIL-C-81582/4 - Connector, Adapter, Rfi Shielded, Cable To Electric Connector (S/S By Sae-As81582/4)
MIL-C-81582/5 - Connector Adapter, Right Angle, Rfi Shielded, Electric Connector To Electric Connector (S/S By Sae-As81582/5)
MIL-C-81582/6 - Connector, Adapter Assembly, Umbilical Cable To Stores Interface, Lanyard Release (S/S By Sae-As81582/6)
MIL-C-81582/7 - Connector, Adapter Assembly, Umbilical Cable To Stores Interface, Lanyard Release (S/S By Sae-As81582/7)
MIL-C-81582/8 - Connector, Adapter Assembly, Umbilical Cable To Stores Interface, Lanyard Release (S/S By Sae-As81582/8)
MIL-C-81582/9 - Connector, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, Caps, Protective (S/S By Sae-As81582/9)
MIL-C-81582 - Connector, Electrical, Bayonet Coupling, Environmental Resisting, Umbilical, General Specification For (S/S By Sae-As81542)
This specification covers environment-resisting, quick disconnect, EMI/RFI shielded and non-shielded umbilical, electric connectors and adapter assemblies with removable crimp or nonremovable solder-type contacts and accessories. Connectors are rated for operation from -55 degrees C (-67 degrees F) to 200 degrees C (392 degrees F). Adapter assemblies are rated for operation from -55 degrees C (-67 degrees F) to 125 degrees C (257 degrees F). The upper temperature is the maximum internal hot spot temperature resulting from any combination of electrical load and ambient temperature.
MIL-C-81659/10 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type Ii Class 2 (Minus 65 Degrees To Plus 200 Degrees C) Series 1, Shell Designator A
MIL-C-81659/11 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type 1, Class 1 (-65 Degrees C To Plus 125 Degrees C) Series 1, Shell Designator A
MIL-C-81659/12 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type 1, Class 2 (Minus 65 Degrees To Plus 200 Degrees C), Series 1, Shell Designation A
MIL-C-81659/13 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2 (S/S By Mil-C-81659/7)
MIL-C-81659/14 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2 (S/S By Mil-C-81659/8)
MIL-C-81659/15 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type I, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2
MIL-C-81659/16 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type I, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C Series 2
MIL-C-81659/17 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Inserts, Type Ii, Class 1 (-65 Degrees C To Plus 125 Degrees C) Series 2 (S/S By Mil-C-81659/9)
MIL-C-81659/18 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant,
Crimp Contacts, Double Insert, Type II, Class 2 (-65 Degrees C to Plus 200 Degrees C) series 2 (S/S by Mil-C-81659/10)
MIL-C-81659/19 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type I, Class 1 (-65 Degrees C To Plus 125 Degrees C) Series 2 (S/S By Mil-C-81659/11)
MIL-C-81659/1 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Single Insert, Type Ii, Class 1(-65 Degrees C To 125 Degrees C), Series 1, Shell Designator A
MIL-C-81659/20 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type I Class 2 (-65 Degrees C To Plus 200 Degrees C) Series 2 (S/S By Mil-C-81659/12)
MIL-C-81659/21 - Connector, Electrical, Rectangular, Plug, Environment Resistant Crimp Contacts Double Insert, Type Ii Class 1 (-65 Degrees C To Plus 125 Degrees C), Series 1, Shell Designator B
MIL-C-81659/22 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type Ii, Class 2 (Minus 65 Degress To Plus 200 Degrees C), Series 1, Shell Designator B
MIL-C-81659/23 - Connector, Electrical Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type L, Class 1 (-65 Degrees C To Plus 125 Degrees C) Series 1 Shell Designator B
MIL-C-81659/24 - Connector, Electrical, Rectangular, Plug Environment Resistant, Crimp Contacts, Double Insert, Type I, Class 2 (Minus 65 Degrees To Plus 200 Degrees C) Series 1, Shell Designator B
MIL-C-81659/25 - Connector, Electrical Rectangular, Receptacle, Environment Resistant Crimp Contacts, Double Insert, Type Ii, Class 1 (-65 Degrees C To Plus 125 Degrees C), Series 1, Shell Designator B
MIL-C-81659/26 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type Ii, Class 2 (Minus 65 Degrees To Plus 200 Degree C) Series Shell Designator B ( No S/S Document)
MIL-C-81659/27 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts Double Insert, Type 1 Class 1 (-65 Degrees C To Plus 125 Degrees C), Series 1, Shell Designator B
MIL-C-81659/28 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type I, Class 2 (Minus 65 Degrees To 200 Degrees C), Series 1, Shell Designator B
MIL-C-81659/29 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Single Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/29)
MIL-C-81659/2 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Single Insert, Type Ii, Class 2 (Minus 65 Degrees To Plus 200 Degrees C), Series 1, Shell Designator A
MIL-C-81659/30 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Single Insert, Type Ii, Class 2 (-65 Degrees C To Plus 200 Degrees C) Series 2, Shell Designator A)
MIL-C-81659/31 - Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/31)
MIL-C-81659/32 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Ii, Class 2) -65 Degrees C To +200 Degrees C, Series 2, Shell Designator A)
MIL-C-81659/33 - Connectors, Electrical, Rectangular, Plug, Crimp Contacts, (Dual Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/33)
MIL-C-81659/34 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Dual Insert, Type Ii, Class 2) -65 Degrees C To +200 Degrees C), Series 2, Shell Designator A)
MIL-C-81659/35 - Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Dual Insert, Type Ii, Class 1, (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/35)
MIL-C-81659/36 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Dual Insert, Type Ii, Class 2 (-65 Degrees C To + Plus 200 Degrees C), Series 2, Shell Size A)
MIL-C-81659/37 - Connectors, Electrical, Rectangular, Plug, Crimp Contacts, (Triple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/37)
MIL-C-81659/38 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Triple Insert, Type Ii, Class 2,) -65 Degrees C To +200 Degrees C), Series 2, Shell Designator A)
MIL-C-81659/39 - Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Triple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/39)
MIL-C-81659/3 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Single Insert, Type Ii Class 1 (65 Degrees C To Plus 125 Degrees C), Series 1, Shell Designator A
MIL-C-81659/40 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Triple Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Size A
MIL-C-81659/41 - Connectors, Electrical, Rectangular, Plug, Crimp Contacts, (Quadruple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/41)
MIL-C-81659/42 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Quadruple Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator A)
MIL-C-81659/43 - Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Quadruple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator A) (S/S By Sae-As81659/43)
MIL-C-81659/44 - Connector, Electrical, Rectangular, Receptacle, Crimp Contact, (Quadruple Insert, Type Ii, Class 2 (-65 Degree C To +200 Degree C), Series 2 Shell Designator A)
MIL-C-81659/45 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Single Insert Type Ii, Class 1 (-65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/46 - Connector, Electrical, Rectangular, Plug, Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/47 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Single Insert Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/48 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Single Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/49 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Dual Insert Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/4 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Single Insert, Type Ii, Class 2 (Minus 65 Degrees To Plus 200 Degrees C), Series I, Shell Designator A
MIL-C-81659/50 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Dual Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/51 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Dual Insert, Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/52 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Dual Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/53 - Connectors, Electrical, Rectangular, Plug Environment Resistant, Crimp Contacts, Quadruple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator B (S/S By Sae-As81659/53)
MIL-C-81659/54 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Triple Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/55 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Triple Insert, Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/56 - Connectors, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Triple Insert, Type Ii, Class 2 (-65 Degrees To +200 Degrees C), Series 2, Shell Designator B (S/S By Sae-As81659/56)
MIL-C-81659/57 - Connectors, Electrical Rectangular, Plug Environment Resistant, Crimp Contacts, Quadruple Insert, Type Ii, Class 1 (-65 Degrees C To +125 Degrees C), Series 2, Shell Designator B (S/S By Sae-As81659/57)
MIL-C-81659/58 - Connectors, Electrical, Rectangular, Plug Environment Resistant, Crimp Contacts, Quadruple Insert, Type Ii, Class 2 (-65 Degrees To +200 Degrees C), Series 2, Shell Designator B (S/S By Sae-As81659/58)
MIL-C-81659/59 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Quadruple Insert, Type Ii, Class 1 (Minus 65 Degrees C To Plus 125 Degrees C), Series 2, Shell Designator B
MIL-C-81659/5 - Connector, Electrical, Rectangular Receptacle, Environment Resistant, Crimp Contacts, Single Insert Type I, Class 1 (-65 Degrees To Plus 125 Degrees), Series 1, Shell Designator A
MIL-C-81659/60 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Quadruple Insert, Type Ii, Class 2 (Minus 65 Degrees C To Plus 200 Degrees C), Series 2, Shell Designator B
MIL-C-81659/61 - Connectors, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Iii, Class 1) (-65 Degrees C To +125 Degrees C), (Series 2, Shell Designator A) (S/S By Sae-As81659/61)
MIL-C-81659/62 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Dual Insert, Type Iii, Class 1 Shell Designator A) (S/S By Sae-As81659/62)
MIL-C-81659/63 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Tripe Insert, Type Iii, Class 1) -65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A) (S/S By Sae-As81659/63)
MIL-C-81659/64 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Quadruple Insert, Type Iii, Class 1) Minus 65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A) (S/S By Sae-As81659/64)
MIL-C-81659/65 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Single Insert, Type Iv, Class 1) Minus 65 Degrees C To Plus 125 Degrees C (Series 2, Shell Designator A) (S/S By Sae-As81659/65)
MIL-C-81659/66 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Iv, Class 1), -65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A) (S/S By Sae-As81659/66)
MIL-C-81659/67 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Iv, Class 1) -65 Degrees C To Plus 125 Degrees C (Series 2, Shell Designator A, Clinch Nut Mounting) (S/S By Sae-As81659/67)
MIL-C-81659/68 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Single Insert, Type Iv, Class 1) Minus 65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A, Float Mounting) (S/S By Sae-As81659/68)
MIL-C-81659/69 - Connector, Electrical, Rectangular, Plug, Crimp Contacts, (Dual Insert, Type Iv, Class 1) Minus 65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A) (S/S By Sae-As81659/69)
MIL-C-81659/6 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Single Insert, Type I Class 2 (Minus 65 Degrees To 200 Degrees C), Series 1, Shell Designator A
MIL-C-81659/70 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Dual Insert, Type Iv, Class 1) Minus 65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A) (S/S By Sae-As81659/70)
MIL-C-81659/71 - Connector, Electrical, Rectangular, Receptacle Crimp Contacts, (Dual Insert, Type Iv, Class 1) -65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A, Clinch Nut Mount) (S/S By Sae-As81659/71)
MIL-C-81659/72 - Connector, Electrical, Rectangular, Receptacle, Crimp Contacts, (Dual Insert, Type Iv, Class 1) -65 Degrees C To Plus 125 Degrees C, (Series 2, Shell Designator A, Float Mounting) (S/S By Sae-As81659/72)
MIL-C-81659/7 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts Double Insert, Type Ii, Class 1 (-65 Degrees C To Plus 125 Degrees C), Series 1, Shell Designator A
MIL-C-81659/8 - Connector, Electrical, Rectangular, Plug, Environment Resistant, Crimp Contacts, Double Insert, Type Ii, Class 2 (Minus 65 Degrees To Plus 200 Degrees C), Series 1, Shell Designator A
MIL-C-81659/9 - Connector, Electrical, Rectangular, Receptacle, Environment Resistant, Crimp Contacts, Double Insert, Type 2 Class 1 (-65 Degrees C To +125 Degrees C), Series 1, Shell Designator A (S/S By Sae-As81659/9)
MIL-C-81659 - Connectors, Electrical, Rectangular, Crimp Contacts, General Specification For (S/S By Sae-As81659)
This specification covers two series of electrical, rectangular connectors with crimp type removable contacts. These connectors are provided with single, dual, triple, and quadruple insert shell configurations.
MIL-C-81703 - Connectors, Electric, Circular, Miniature, Rack And Panel Or Push-Pull Coupling, Environment Resisting (S/S By Sae-As81703)
This specification covers three series of environment resisting, circular, miniature electrical connectors (plugs and receptacles) with removable crimp and/or nonremovable solder contacts, and accessories.
MIL-C-81790 - Connectors, Receptacle, External Electric Power, Aircraft, General Specification For (S/S By Sae-As81790)
This specification covers the requirements for aircraft external electric power receptacles.
MIL-C-82078 - Clamps, Electrical, Conductive
MIL-C-83413/11 - Connectors And Assemblies, Electrical, Aircraft Grounding: Receptacles, One Piece
MIL-C-83503/1 - Connector, Electrical, Flat Cable, Card Edge, (.050 Spacing)
MIL-C-83503/10 - Connector, Electrical, Flat Cable, Thru Plate Mounting, (.100 Spacing)
MIL-C-83503/2 - Connector, Electrical, Flat Cable, Plug, (.050 Spacing)
MIL-C-83503/3 - Connector, Electrical, Flat Cable, Plug, Printed Circuit Board, (.050 Spacing)
MIL-C-83503/4 - Connector, Electrical, Flat Cable, Solderless Wrap, (.050 Spacing)
MIL-C-83503/5 - Connector, Electrical, Flat Cable, Crimp, Box Contacts For
MIL-C-83503/8 - Connector, Electrical, Flat Cable, Coaxial, (.100 Spacing)
MIL-C-83503/9 - Connector, Electrical, Flat Cable, Crimp, (.100 Spacing)
MIL-C-83515/1 - Connector, Telecommunication, Polarized Shell, Plug, Male Rack And Panel, Solder Contact, Screwlock (S/S By A-A-55528)
MIL-C-83515/2 - Connector, Telecommunication, Polarized Shell, Receptacle, Female Rack And Panel, Solder Contacts, Screwlock (S/S By A-A-55529)
MIL-C-83515/3 - Connector, Telecommunication, Polarized Shell, Plug, Male Rack And Panel, Solder Contact, Side Entry Shield, Screwlock (S/S By A-A-55530)
MIL-C-83515/4 - Connector, Telecommunication, Polarized Shell, Receptacle, Female Rack And Panel, Solder Contact, Side Entry Cover, Screwlock (S/S By A-A-55531)
MIL-C-83515/5 - Connector, Telecommunication, Polarized Shell, Plug, Male, Printed Circuit Board, Solder Contact, Screwlock (S/S By A-A-55532)
MIL-C-83515/6 - Connector, Telecommunication, Polarized Shell, Receptacle, Female, Printed Circuit Board, Solder Contact, Screwlock (S/S By A-A-55533)
MIL-C-83515 - Connectors, Telecommunication, Polarized Shell, General Specification For (S/S By A-A-55528, A-A-55529, A-A-55530, A-A-55531, A-A-55532, And A-A-55533)
MIL-C-83723/10 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wide Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series I, Class H ) (S/S By Mil-C-26482 And Ms3442)
MIL-C-83723/11 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder Flange Mount, Bayonet Coupling, Solder Pin Contact) (Series I, Class H) (S/S By Mil-C-26482 And Ms3443)
MIL-C-83723/12 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling), (Series I, Class H) (S/S By Mil-C-26482 And Ms3449)
MIL-C-83723/13 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Bayonet Coupling, Crimp Socket Contact), Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3476)
MIL-C-83723/14 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Bayonet Coupling, Crimp Pin, Contact)(Series I, Classes A, G, And R) (S/S By Mil-S-26482 And Ms3476
MIL-C-83723/15 - Connectors, Electrical, (Circular, Environment Resisting), Backshell, Straight W/O Strain Relief, And With Mechanical Strain Relief, Straight Or Right Angle, Series Iii (See Notice 1 For Replacement Information)
MIL-C-83723/1 - Connectors, Electrical, (Circular Environment Resisting), Receptacle, (Narrow Flange Mount, Bayonet Coupling Crimp Socket Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3470)
MIL-C-83723/25 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wall Mounting Flange, Threaded Coupling, Solder Pin Contacts), (Series Ii, Class H) (S/S By Mil-C-5015 And Ms3142)
MIL-C-83723/26 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder Flange Mount, Threaded Coupling, Solder Pin Contacts), (Series Ii Class H) (S/S By Mil-C-5015 And Ms3143)
MIL-C-83723/28 - Connector, Electric, (Circular, Environment Resisting), Plug, Grommet Sealing, Size 0 Through 20 (See Notice 1 For Replacement Information)
MIL-C-83723/29 - Connector, Electric, Contact, Pin, Crimp Type Size 0 Thru 16, For Threaded Connectors (S/S By Mil-C-39029/29)
MIL-C-83723/2 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Narrow Flange Mount, Bayonet Coupling, Crimp Pin Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3470)
MIL-C-83723/30 - Connector, Electric, Contact, Socket, Crimp Type, Size 0 Thru 16, For Threaded Connectors (S/S By Mil-C-39029/30)
MIL-C-83723/31 - Connector, Electrical, (Circular, Environment Resisting), Contact, Insert-Extract Tool, Sizes 12, 16, And 20 (S/S By Mil-I-81969/14)
MIL-C-83723/32 - Connector, Electric, Contact, Extract Tool, Size 0, 4 And 8
MIL-C-83723/33 - Connector, Electric, Contact, Pin, Crimp Type Size 12, 16 And 20, For Bayonet Connectors (S/S By Mil-C-39024/4)
MIL-C-83723/34 - Connector, Electric, Contact, Socket Crimp Style, Size 12, 16 And 20, For Bayonet Connectors (S/S By Mil-C-39029/5)
MIL-C-83723/36 - Connectors, Electrical, (Circular, Environment Resisting) Plug, (Bayonet Coupling, Prewired Pin Contact), Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only)
MIL-C-83723/38 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Narrow Flange Mount, Bayonet Coupling, Prewired Pin Contact), (Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only)
MIL-C-83723/39 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Narrow Flange Mount, Bayonet Coupling, Prewired Socket Contact), (Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only
MIL-C-83723/3 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wide Flange Mount, Bayonet Coupling, Crimp Socket Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3472)
MIL-C-83723/40 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wide Flange Mount, Bayonet Coupling, Prewired Pin Contact), (Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only),
MIL-C-83723/41 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wide Flange Mount, Bayonet Coupling, Prewired Socket Contact), Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only)
MIL-C-83723/42 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Rfi Grounding, Bayonet Coupling, Crimp Pin Contact), (Series I Classes G And R) (S/S By Mil-C-26482 And Ms3475)
MIL-C-83723/43 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Rfi Grounding, Bayonet Coupling, Crimp Socket Contact), (Series I, Classes G And R) (S/S By Mil-C-26482 And Ms3475)
MIL-C-83723/44 - Connectors, Electrical (Circular, Environment Resisting), Caps, Receptacle, (Bayonet Coupling), (Series I, Shell Sizes 8 Through 24) (See Notice 1 For Replacement Information)
MIL-C-83723/45 - Connectors, Electrical (Circular, Environment Resisting), Dummy Receptacles, (Bayonet Coupling), (Series I, Shell Sizes 8 Through 24) (See Notice 1 For Replacement Information)
MIL-C-83723/46 - Connectors, Electrical, (Circular, Environment Resisting), Caps, Plug, (Bayonet Coupling), (Series I, Shell Sizes 8 Through 24) (See Notice 1 For Replacement Information)
MIL-C-83723/47 - Connector, Electric, Backshell, Rfi Grounding, Bayonet Coupling Series (S/S By Mil-C-85049/26)
MIL-C-83723/48 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Rfi Grounding, Bayonet Coupling, Prewired Pin Contact), (Series I, Classes A, G, And R, (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only))
MIL-C-83723/49 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Rfi Grounding, Bayonet Coupling, Prewired Socket Contact), (Series I, Classes A, G, And R (Shell Size 8 For Inserts 8-2, 8-3, And 8-4 Only))
MIL-C-83723/4 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Wide Flange Mount, Bayonet Coupling, Crimp Pin Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3472)
MIL-C-83723/51 - Connector, Electrical (Circular, Environment Resisting) Backshell, Straight, 90 Degree, And 45 Degree For Series Ii Connectors And Conduit Fittings, Classes A, G And R
MIL-C-83723/52 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Threaded Coupling, Self-Locking, Crimp Pin Contacts), (Series Ii, Class K) (S/S By Ms3459)
MIL-C-83723/53 - Connectors, Electrical, (Circular, Environment Resisting), Plug, (Threaded Coupling, Self-Locking, Crimp Socket Contacts), (Series Ii, Class K) (S/S By Ms3459)
MIL-C-83723/5 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling, Crimp Socket Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3474)
MIL-C-83723/6 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling, Crimp Pin Contact), Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3474)
MIL-C-83723/7 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Cable Connecting, Bayonet Coupling, Crimp Socket Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3471)
MIL-C-83723/8 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Cable Connecting, Bayonet Coupling, Crimp Pin Contact), (Series I, Classes A, G, And R) (S/S By Mil-C-26482 And Ms3471)
MIL-C-83723/9 - Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Narrow Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series I, Class H) (S/S By Mil-C-26482 And Ms3440)
MIL-C-83733/13 - Connector, Electrical, Miniature, Rectangular Type, Contact, Electrical Connector, Pin, Crimp Removable Shielded Cable Applications, Size 12, 200 Degrees C (S/S By Mil-C-39029/50)
MIL-C-83733/14 - Connector, Electrical, Miniature, Rectangular Type, Contact, Contact, Electrical Connector, Socket, Crimp Removable, Shielded Cable Applications, Size 12, 200 Degrees C. (S/S By Mil-C-39029)
MIL-C-83733/15 - Connector, Electrical, Miniature, Rectangular Type, Backshell, Radio Frequency Interference (S/S By Mil-C-85049/28)
MIL-C-83733/16 - Connector, Electrical, Miniature, Rectangular Type, Strain Relief, Straight (S/S By Mil-C-85049/44)
MIL-C-85028 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae-As85028)
This specification covers environment and fluid resisting, rectangular type, rack to panel electrical connectors (plugs and receptacles). These connectors utilize individually sealing removable crimp type contacts and are capable of continuous operation from -65 degrees to +150 degrees C.
MIL-C-85028/1 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae As85028/1)
MIL-C-85028/2 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae-As85028/2)
MIL-C-85028/3 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae-As85028/3)
MIL-C-85028/4 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae-As85028/4)
MIL-C-85028/5 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae-As85028/5)
MIL-C-85028/6 - Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For (S/S By Sae As85028/6)
MIL-C-85049/10 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Shield Termination, Category 1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/10)
MIL-C-85049/11 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Category 1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/11)
MIL-C-85049/14 - Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/14)
MIL-C-85049/15 - Connector Accessories, Electrical, Stain Relief, 45 Degrees, Self-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/15)
MIL-C-85049/16 - Connector Accessories, Electrical, Strain Relief, 90 Degrees, Self-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/16)
MIL-C-85049/17 - Connector Accessories, Electrical, Backshell, Environmental, Straight, Shield Termination, Category 2B (For Mil-C-27599 Series I And Ii Connectors) (S/S By Sae-As85049/17)
MIL-C-85049/18 - Connector Accessories, Electrical, Backshell, Environmental, Straight, Rfi/Emi, Category 2B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/18)
MIL-C-85049/19 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Rfi/Emi, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/19)
MIL-C-85049/1 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Grounding, (Without Strain Relief), Category 1C (For Mil-C-5015 Solder Type, V Thread Of Ms310X Classes A, B, C Or K Connectors) (S/S By Sae-As85049/1)
MIL-C-85049/20 - Connector Accessories, Electrical, Backshell, Straight, Rfi, Emi, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/20)
MIL-C-85049/21 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/21)
MIL-C-85049/23 - Connector Accessories, Electrical, Backshell, Nonenvironmental, 45 Degrees, Shield Termination, Category 3A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/23)
MIL-C-85049/24 - Connector Accessories, Electrical, Backshell, Nonenvironmental, 90 Degrees, Shield Termination, Category 3A (For Mil-C-5015 Crimo, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/24)
MIL-C-85049/25 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/25)
MIL-C-85049/26 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/26)
MIL-C-85049/27 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Self-Locking, Category 3B (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As95049/27)
MIL-C-85049/28 - Connector Accessories, Electrical, Backshell, Non-Environmental, Straight, Shield Termination, Category 3B (For Mil-C-83733 Connectors) (S/S/ By Sae-As85049/28)
MIL-C-85049/29 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Strain Relief, Category 3B (For Mil-C-27599 Series I And Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/29)
MIL-C-85049/2 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, Straight, Category 1C (For Mil-C-5015 Solder Type, V Thread Of Ms310X Classes A, B, C Or K Connectors) (S/S By Sae-As85049/2)
MIL-C-85049/30 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Individual Shielded Wire Termination, Category 3B (For Mil-C-27599 Series I And Ii Connectors) (S/S By Sae-As85049/30)
MIL-C-85049/31 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Non-Self-Locking, Category 3B (For Mil-C-5015 Crimp, Mil-C 26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/31)
MIL-C-85049/32 - Connector Accessories, Electrical, Backshell, Nonenvironmental, 90 Degrees, Shield Termination, Category 3C (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/32)
MIL-C-85049/33 - Connector Accessories, Electrical, Back Shell, Nonenvironmental, Straight, Shield Termination, Category 3C (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/33)
MIL-C-85049/34 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Threaded Adapter, Threaded Adapter, Category 3C (For Mil-C-26482 Series I Jam Nut Receptacle Connector) (S/S By Sae-As85049/34)
MIL-C-85049/35 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Threaded Adapter, Category 3C (For Mil-C-27599 And Mil-C-38999 Series I And Ii Connectors) (See Notice 1 For Replacement Information)
MIL-C-85049/36 - Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3B (For Mil-C-27599 Series I And Ii Connectors) (S/S By Sae-As85049/36)
MIL-C-85049/37 - Connector Accessories, Electrical, Backshell, Non Environmental, Split 90 Degrees, Emi/Rfi Shield Termination, Category 38 (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/37)
MIL-C-85049/38 - Connector Accessories, Electrical, Strain Relief, Straight Self-Locking And Nonself-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/38)
MIL-C-85049/39 - Connector Accessories, Electrical, Strain Relief, 90 Degrees Self-Locking And Nonself-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/39)
MIL-C-85049/3 - Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Category 1A (For Mil-C-22992 Connectors, Classes C, J, And R) (S/S By Sae-As85049/3)
MIL-C-85049/41 - Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Category 4C (For Mil-C-5015 Solder Type, V Thread Of Ms310X Classes A, B, C Or K Connectors) (S/S By Sae-As85049/41)
MIL-C-85049/42 - Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Straight, Category 4A (For Mil-C-5015 Solder Type, V Thread Of Ms310X Classes A, B, C Or K Connectors) (S/S By Sae-As85049/42)
MIL-C-85049/43 - Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 45 Degrees, Category 4B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/43)
MIL-C-85049/44 - Connector Accessories, Electrical, Strain, Relief, Straight, Category 4C (For Mil-C-83733 Connectors) (S/S By Sae-As85049/44)
MIL-C-85049/45 - Connector Accessories, Electrical, Strain Relief, Straight, Nonmetallic, Category 4C (For Mil-C-27599 Series I And Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/45)
MIL-C-85049/46 - Connector Accessories, Electrical, Strain Relief, 90 Degree, Nonmetallic, Category 4C (For Mil-C-27599 Series I And Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/46)
MIL-C-85049/47 - Connector Accessories, Electrical, Strain Relief, 90 Degree, Self-Locking And Nonself-Locking, Category 4B (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/47)
MIL-C-85049/48 - Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (For Mil-C-24308 Connectors) (S/S By Sae-As85049/48)
MIL-C-85049/49 - Connector Accessories, Electrical, Strain Relief, Straight, Self-Locking And Nonself-Locking, Category 4B (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/49)
MIL-C-85049/4 - Connector, Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Up, Category 1A (For Mil-C-22992 Connectors, Classes C, J, And R) (S/S By Sae-As85049/4)
MIL-C-85049/50 - Connector Accessories, Electrical, Strain Relief, 90 Degree, Category 4C (For Mil-C-24308 Connectors) (S/S By Sae-As85049/50)
MIL-C-85049/51 - Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 90 Degree, Self-Locking And Non-Self-Locking Category 4B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/51)
MIL-C-85049/52 - Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Self-Locking And Non-Self-Locking, Straight, Category 4B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/52)
MIL-C-85049/53 - Connectors Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Category 4C (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/53)
MIL-C-85049/54 - Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 45 Degrees, Category 4C (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/54)
MIL-C-85049/55 - Connector Accessories, Electrical, Strain Relief, Nonenvironmental , 90 Degrees, Self-Locking And Non-Self-Locking, Category 4C (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/55)
MIL-C-85049/56 - Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (For Mil-C-27599 Series I And Ii Connectors) (S/S By Sae-As85049/56)
MIL-C-85049/57 - Connector Accessories, Electrical, Strain Relief, 45 Degrees, Self-Locking And Nonself-Locking, Category 4C (Mil-C-3899 Series I And Ii Connectors) (S/S By Sae-As85049/57)
MIL-C-85049/58 - Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/58)
MIL-C-85049/59 - Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For Mil-C-22992 Connectors, Classes C, J, And R) (S/S By Sae-As85049/59)
MIL-C-85049/5 - Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Down, Category 1A (For Mil-C-22992 Connectors, Classes C, J, And R) (S/S By Sae-As85049/5)
MIL-C-85049/60 - Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3 And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/60)
MIL-C-85049/61 - Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For Mil-C-27599 Connectors) (S/S By Sae-As85049/61)
MIL-C-85049/62 - Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For Mil-C-27599 Series I And Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/62)
MIL-C-85049/63 - Connector Accessories, Electrical, Strain Relief, 90 Degrees, Self-Locking And Nonself-Locking, Category 4C (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/63)
MIL-C-85049/64 - Connector Accessories, Electrical, Strain Relief, Split, Straight, Category 4C (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/64)
MIL-C-85049/65 - Connector Accessories, Electrical, Strain Relief, Split 90 Degrees, Category 4C (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/65)
MIL-C-85049/66 - Connector Accessories, Electrical, Strain Relief, Split Straight, Category 4C (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3 And Mil-C-83723 Series Iii Connectors) (S/S By Mil-C-85049/52)
MIL-C-85049/67 - Connector Accessories, Electrical, Strain Relief, Split 90 Degree, Category 4C (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3 And Mil-C-83723 Series Iii Connectors) (S/S By Mil-C-85049/51)
MIL-C-85049/68 - Connector, Accessories, Electrical, Boots, Heat Shrinkable, Straight And 90 Degree, Category 6 (For Use With Mil-C-85049/62, Mil-C-85049/60 And Mil-C-85049/59 Adapters) (S/S By Ms3109, Ms3117 And Mil-C-83723/16)
MIL-C-85049/69 - Connector Accessories, Electrical, Adapter, Shrinkboot, Category 5(For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/69)
MIL-C-85049/6 - Connector, Accessories, Electrical, Backshell, Environmental, Cable Sealing, 45 Degree, Shield Termination, Category 1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/6)
MIL-C-85049/74 - Connector Accessories, Electrical, Potting Boot, Category 7 (For Use With Mil-C-85049/61 Potting Boot Ring) (S/S By Sae-As85049/74)
MIL-C-85049/75 - Connector Accessories, Electrical, Potting Boot, Category 7 (For Use With Mil-C-85049/58 Potting Boot Ring) (S/S By Sae-As85049/75)
MIL-C-85049/7 - Connector, Accessories, Electrical, Backshell, Environmental, Cable Sealing, 45 Degree, Category 1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/7)
MIL-C-85049/82 - Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (Rfi-Emi), Shrink Sleeve Accommodation, Category 3B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3 And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/82)
MIL-C-85049/83 - Connector Accessories, Electrical, Backshell, 45 Degrees Self-Locking, Shield, Band Termination, Rfi/Emi), Shrink Sleeve Accommodation Category 3B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/83)
MIL-C-85049/84 - Connector Accessories, Electrical, Backshell, 90 Degrees, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Sleeve Accommodation, Category 3B (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/84)
MIL-C-85049/85 - Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Boot Accommodation, Category 3B (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/85)
MIL-C-85049/86 - Connector Accessories, Electrical, Backshell, 45 Degrees, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Sleeve Accommodation, Category 3B (For Mil-C-38999 Series I And Ii Connectors) (S/S By Sae-As85049/86)
MIL-C-85049/87 - Connector Accessories, Electrical, Backshell, 90 Degrees, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Sleeve Accommodation, Category 3B (For Mil-C-38999 Series I And Iii Connectors) (S/S By Sae-As85049/87)
MIL-C-85049/88 - Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Boot Accommodation, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By 85049/88)
MIL-C-85049/89 - Connector Accessories, Electrical, Backshell, 45 Degrees, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Sleeve Accommodation, Category 3B (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/89)
MIL-C-85049/8 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 90 Degree, Shield Termination, Category 1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2, Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/8)
MIL-C-85049/90 - Connector Accessories, Electrical, Backshell, 90 Degrees, Self-Locking, Shield Band Termination, (Rfi/Emi), Shrink Sleeve Accommodation, Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/90)
MIL-C-85049/91 - Connectors Accessories, Composite, Electrical, Strain Relief, Straight, Self-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/91)
MIL-C-85049/92 - Connector, Accessories, Composite, Electrical, Strain Relief, 90 Degrees Self-Locking, Category 4C (For Mil-C-38999 Series Iii And Iv Connectors) (S/S By Sae-As85049/92)
MIL-C-85049/93 - Connector Accessories, Electrical, Termination, Shield, Split Support Ring, Composite, Nonenvironmental, Straight, Category 7 (S/S By Sae-As85049/93)
MIL-C-85049/94 - Connector Accessories, Electrical, Mounting Device Flange Type, Full Mounting Perimeter Device, Type I (Heavy Duty)(S/S By Sae-As 85049/94)
MIL-C-85049/95 - Connector Accessories, Electrical, Mounting Device Flange Type, 3/4 Mounting Perimeter Device, Type Ii (Medium Duty)(S/S By Sae-As85049/95)
MIL-C-85049/96 - Connector Accessories, Electrical, Mounting Device Flange Type, 1/4 Mounting Perimeter Device, Type Iii (Light Duty) (S/S By Sae-As85049/96)
MIL-C-85049/9 - Connector Accessories, Electrical, Backshell, Environmental, Cable Sealing, 90 Degree, Category,1A (For Mil-C-5015 Crimp, Mil-C-26482 Series 2,Mil-C-81703 Series 3, And Mil-C-83723 Series Iii Connectors) (S/S By Sae-As85049/9)
MIL-C-85049 - Connector Accessories, Electrical General Specification For (S/S By Sae-As85049)
This specification covers connector accessories for use with electrical connectors under environmental or non-environmental conditions. Applicable connector accessories defined in this specification are delineated for the suppression of Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI).
MIL-C-85528 - Connector, Electrical, Mounting Device, Flange Type, General Specification For (S/S By Mil-C-85049)
This specification covers mounting flanges utilized for mounting flange type electrical connectors.
MIL-C-85528/1 - Connector, Electrical,Mounting Device, Flange Type, Full Mounting Perimeter Device, Type I (Heavy Duty) (S/S By Mil-C-85049/94)
MIL-C-85528/2 - Connector, Electrical, Mounting Device, Flange Type, 3/4 Mounting Perimeter Device, Type Ii (Medium Duty) (S/S By Mil-C-85049/95)
MIL-C-85528/3 - Connector, Electrical, Mounting Device, Flange Type, 1/4 Mounting Perimeter Device, Type Iii (Light Duty) (S/S By Mil-C-85049/96)
MIL-D-55052 - Dummy Connector, Plug, Electrical Molded Rubber, Splashproof And Waterproof (Use Mil-C-52286)
MIL-DTL-12520/10 - Connectors, Receptacle, Electrical Waterproof (Shell Size 26, Male Inserts)
MIL-DTL-12520/11 - Connectors, Receptacle, Electrical Waterproof (Shelf Size 26, Female Inserts)
MIL-DTL-12520/8 - Connector, Receptacle, Electrical, Waterproof (Shell Size 20, Male Inserts)
MIL-DTL-12520/9 - Connectors, Receptacle, Electrical Waterproof (Shell Size 20, Female Inserts)
MIL-DTL-12520 - Connectors, Plug And Receptacle (Electrical, Waterproof), And Accessories; General Specification For
This specification covers the general requirements for a series of centerlock screw coupling, waterproof, polarized, multicontact connectors and accessories for inter-connection of power and control circuits on electronic equipment (see 6.1).
MIL-DTL-12883/10 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Bottom Mounting, Saddle Type Without Shield Base, 7 Contact, Radial)
MIL-DTL-12883/11 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Bottom Mounting, Saddle Type Without Shield Base, 9 Contact, Radial)
MIL-DTL-12883/1 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Bottom Mounting, Saddle Type 8 Contact, Radial)
MIL-DTL-12883/2 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Top Mounting, Saddle Type With Shield Base, 7 Contact, Radial)
MIL-DTL-12883/3 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Top Mounting, Saddle Type With Shield Base, 9 Contact, Radial)
MIL-DTL-12883/40 - Sockets, Plug-In Electronic Components For Relays, 4-Pole, 10 Amperes (Mil-R-6106, Mil-R-83536, Mil-R-83726, And Ms27709)
MIL-DTL-12883/41 - Sockets, Plug-In Electronic Components, For Relays, 2-Pole, 10 Amperes (Mil-R-6106 And Mil-R-83536)
MIL-DTL-12883/42 - Sockets And Accessories For Plug-In Electronic Components (Power Transistor, 2 Contact, 10 Amperes, To-3), Radial
MIL-DTL-12883/44 - Sockets, Plug-In Electronic Components, Socket For Relays, 4-Pole, 5 Amperes (Mil-Prf-6106 And Mil-Prf-83536)
MIL-DTL-12883/45 - Sockets, Plug-In Electronic Components, For Relays, For 2-Pole, 5 Amperes (Mil-Prf-6106 And Mil-Prf-83536)
MIL-DTL-12883/46 - Sockets, Plug-In Electronic Components, For Relays, 3-Pole, 10 Amperes (Mil-Prf-6106 And Mil-Prf-83536)
MIL-DTL-12883/47 - Socket, Plug-In Electronic Components, For Relays, 6-Pole, 10 Amperes (Mil-Prf-6106 And Mil-Prf-83536)
MIL-DTL-12883/48 - Socket, Plug-In Electronic Components, For Relays, 3-Pole, 25 Amperes (Mil-Prf-83536/32 And /33)
MIL-DTL-12883/49 - Sockets And Accessories For Plug-In Electronic Components, (Mounting Tracks For Relays, 10 Amperes (Mil-R-6106, Mil-R-83536, And Mil-83726)
MIL-DTL-12883/50 - Sockets And Accessories For Plug-In Electronic Components, Brackets And Socket Assembly For Relays, 2-Pole, 10 Amperes (Mil-Prf-6106 And Mil-Prf-83536)
MIL-DTL-12883/51 - Sockets And Accessories For Plug-In Electronic Components, Bracket And Socket Assembly For Relays, 4-Pole, 10 Amperes (Mil-Prf-6106, Mil-Prf-83536, Mil-Prf-83726)
MIL-DTL-12883/52 - Sockets And Accessories For Plug-In Electronic Components Socket Assembly For Relays, 2,3, And 4-Pole, Track Mount (Mil-Prf-6106, Mil-Prf-83536, And Mil-Prf-83726)
MIL-DTL-12883/53 - Sockets And Accessories For Plug-In Electronic Components, Mounting Track, For Relay Sockets And Electromagnetic Relays
MIL-DTL-12883/54 - Sockets, Plug-In Electronic Components Socket For Mil-Prf-6106 Relays And Ms27742 Relays
MIL-DTL-12883/55 - Sockets, Plug-In Electronic Components Socket For Mil-Prf-6106 Relays
MIL-DTL-12883/8 - Sockets And Accessories For Plug-In Electronic Components (Electron Tube, Top Mounting, Saddle Type Without Shield Base, 7 Contact, Radial)
MIL-DTL-12883 - Sockets And Accessories For Plug-In Electronic Components, General Specification For
This specification covers the general requirements for sockets and socket accessories for plug-in electronic components, such as electron tubes and related electronic devices, plug-in capacitors, crystal units, batteries, vibrators, relays, transistors, coils, etc. (see 6.2).
MIL-DTL-2036 - Enclosures For Electric And Electronic Equipment, Naval Shipboard
This specification covers requirements for enclosures that house electric and electronic equipment for Naval shipboard use. Details concerning construction, ventilation, cooling, and mechanical protection are included in this specification. This specification also covers that class of explosion proof equipment which will contain any spark or ignition within the enclosure and not permit ignition in the surrounding external atmosphere as a result of normal operation or failure of electrical circuits within the enclosure. This specification is not intended to cover enclosures which form an integral part of equipment such as batteries.
MIL-DTL-21097/11 - Connectors, Electrical, Printed Wiring Board Keys, Polarizing
MIL-DTL-21097/13 - Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing: 0.200, Alternate Dual Row, Type Cr, Removable Contact
MIL-DTL-21097/14 - Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing: 0.200, Alternate Dual Row, Type Cs, Blade Contact (Mounting Provision A)
MIL-DTL-21097/15 - Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing: 0.200, Alternate Dual Row, Type Cs, Blade Contact (No Mounting Provision)
MIL-DTL-21097/16 - Connectors, Electrical, Printed Wiring Board Contact, Crimp, Removable, Type Cr
MIL-DTL-21097/17 - Connectors, Electrical, Printed Wiring Board Contact, Solder, Removable, Type Cr
MIL-DTL-21097/18 - Connectors, Electrical, Printed Wiring Board Tool, Contact, Removal, For Type Cr Connector Contacts
MIL-DTL-21097/19 - Connectors, Electrical, Printed Wiring Board Blade Simulator For Measuring Engagement And Separation Forces For Type Cr Contacts
MIL-DTL-21097/21 - Connectors, Electrical, Printed Wiring Board Receptacle, Card Insertion, Contact Spacing (.156), Types A And Ad
MIL-DTL-21097/2 - Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Single Row, Type Cr
MIL-DTL-21097/3 - Connectors, Electrical, Printed Wiring Board Composite, Adapter, Contact Spacing (.200) Individual Contacts, Type Cs
MIL-DTL-21097/4 - Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Alternate Dual Row, Type Cr
MIL-DTL-21097/5 - Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing (.200) Alternate Dual Row, Type Cs
MIL-DTL-21097 - Connectors, Electrical, Printed Wiring Board, General Purpose General Specification For
This specification covers multicontact connectors for 1/16, 3/32, and 1/8 inch printed wiring boards, and for interconnections between printed wiring boards. The connectors are intended to provide a reliable connection between printed wiring and conventional wiring. The interconnector concept is intended to provide connection of printed wiring on one board to printed wiring on another board.
MIL-DTL-21617 - Connectors, Plug And Receptacle, Electrical, Rectangular, Polarized Shell, Miniature Type General Specification For
This specification covers multi-contact, rectangular, polarized shell, miniature type, electrical and electronic rack and panel connectors (plugs and receptacles).
MIL-DTL-22992 - Connectors, Plugs And Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification For
This specification covers multi-contact, heavy duty, quick disconnect, waterproof, electrical plug and receptacle connectors and associated accessories for electronic and electrical power and control circuits. Connectors are rated for -55 Degrees C to +125 Degrees C. See 6.1 for intended use and applications.
MIL-DTL-24231/10 - Connectors, Single Cable, Type Iii, 14-, 24-, 30-, Or 40-Conductor
MIL-DTL-24231/11 - Connector, Multiple Cable, Type Iv
MIL-DTL-24231/12 - Connector, Receptacle, Multi-Pin, Type V, Three-, Four-, And Five-Conductor
MIL-DTL-24231/13 - Connector, Receptacle, Multi-Pin, Type V, Seven-And Nine-Conductor
MIL-DTL-24231/14 - Connectors, Receptacle, Multi-Pin, Type V, 14-, 24-, 30-, And 40-Conductor
MIL-DTL-24231/15 - Connector, Adapter, For Molded Plug, Type Ii, Three-And Four-Conductor
MIL-DTL-24231/16 - Connector, Adapter, For Molded Plug, Type Ii, Seven-Conductor
MIL-DTL-24231/17 - Connector, Adapter, For Molded Plug, Type Ii, Nine-Conductor
MIL-DTL-24231/18 - Connector, Plug, Type I, Molded, 65-Conductor
MIL-DTL-24231/19 - Connector, Single Cable, Type Iii, 65-Conductor
MIL-DTL-24231/1 - Connector, Plug, Type I, Molded, Three-,Four-, And Five-Conductor
MIL-DTL-24231/20 - Connector, Receptacle, Multi-Pin, Type V, 65-Conductor
MIL-DTL-24231/21 - Connector, Plug, Type I, Molded, 80-Conductor
MIL-DTL-24231/22 - Connector, Receptacle, Type Iv, 80-Conductor
MIL-DTL-24231/24 - Connector, Single Cable, Type Iii, Three-Conductor, For Lsthof-9 Cable
MIL-DTL-24231/25 - Connector, Hull Inserts, Type Vii
MIL-DTL-24231/26 - Connector, Single Cable, Type Iii, For Type 2Swf Cables
MIL-DTL-24231/27 - Connector, Receptacle, Multi-Pin, Type V, For Type Ls2Swu-1 Cable
MIL-DTL-24231/28 - Connector, Plug, For Hull Inserts, Type Vi
MIL-DTL-24231/29 - Connector, Preform Molded Inserts, For Molded Plugs, Type I
MIL-DTL-24231/2 - Connector, Plug, Type 1, 90-Degree, Molded, Three-,Four-, And Five-Conductor
MIL-DTL-24231/30 - Connector, Plug, Glass Reinforced Polymer, Type I, Molded, Three- And Four-Conductor
MIL-DTL-24231/3 - Connector, Plug, Type I, Molder, Seven- And Nine-Conductor (Straight And 90 Degrees)
MIL-DTL-24231/4 - Connector, Plug, Type I, Molded, 14-, 24-, 30-, Or 40-Conductor (Straight And 90 Degrees)
MIL-DTL-24231/5 - Connector, Single Cable, Type Iii, Three-, Four-, Or Five-Conductor
MIL-DTL-24231/6 - Connector, Single Cable, Type Iii, For Dss-3 Cable
MIL-DTL-24231/7 - Connector, Single Cable, Type Iii, Seven-Conductor
MIL-DTL-24231/8 - Connector, Single Cable, Type Iii, Seven-Conductor
MIL-DTL-24231/9 - Connector, Single Cable, Type Iii, Seven-And Nine-Conductor
MIL-DTL-24231 - Connectors, Plugs, Receptacles, Adapters, Hull Inserts, And Hull Insert Plugs, Pressure-Proof, General Specification For
This specification covers pressure-proof single and multiple cable connectors, plugs, receptacles, adapters, hull inserts, and hull insert plugs.
MIL-DTL-24308/1 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Receptacle, Socket Contacts, General Purpose, Class D And G, Solder Type
MIL-DTL-24308/23 - Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack And Panel, Socket Contacts Printed Wiring Board Termination Types
MIL-DTL-24308/24 - Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack And Panel, Pin Contacts Printed Wiring Board Termination Types
MIL-DTL-24308/25 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Screw-Lock Assembly, Male
MIL-DTL-24308/26 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Screw-Lock Assembly, Female
MIL-DTL-24308/27 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Insulation Displacement, Socket Contacts, Nonenvironmental
MIL-DTL-24308/28 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Insulation Displacement, Pin Contacts, Nonenvironmental, Class G
MIL-DTL-24308/2 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Receptacle, Socket Contacts, General Purpose, Class D And G, Crimp Type
MIL-DTL-24308/3 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Pin Contacts, General Purpose, Class D And G, Solder Type
MIL-DTL-24308/4 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Pin Contacts, General Purpose, Class D And G, Crimp Type
MIL-DTL-24308/5 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Receptacle, Socket Contacts, Nonmagnetic, Class M And N, Solder Type
MIL-DTL-24308/6 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Receptacle Socket Contacts, Nonmagnetic, Classes M And N, Crimp Type
MIL-DTL-24308/7 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Pin Contacts, Nonmagnetic, Classes M And N, Solder Type
MIL-DTL-24308/8 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Pin Contacts, Nonmagnetic, Class M And N, Crimp Type
MIL-DTL-24308/9 - Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack And Panel, Plug, Pin Contacts, Hermetic, Classes H And K
MIL-DTL-24308 - Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack And Panel, General Specification For
This specification covers the requirements for nonenvironmental, polarized shell, miniature, rack and panel connectors having pin and socket, crimp (removable), solder (nonremovable), or insulation displacement (nonremovable) contacts with rigid or float mounting, designed for -55 degrees C to +125 degrees C operating temperature range.
MIL-DTL-25516 - Connectors, Electrical, Miniature, Coaxial, Environment Resistant Type, General Specification For
This specification covers a series of miniature, moisture proof connectors suitable for operation with shielded and unshielded cable up to 750 volts rms under severe environmental conditions.
MIL-DTL-25955 - Connectors, Electrical, Environment Resisting, Miniature, With Snap-In Contacts
This specification covers miniature electrical connectors, plugs and receptacles, of an environment resisting class with snap-in contacts and receptacles of identical mating dimensions of a hermetically sealed class with non-removable contacts.
MIL-DTL-26482 - Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Receptacles And Plugs, General Specification For
This specification covers the general requirements for two series of environment resisting, quick disconnect, miniature, circular electrical connectors (and accessories). Each series includes hermetic receptacles. The two series of connectors are intermateable when using power contacts and are not intermateable when using shielded contacts. When intermated, the minimum performance requirement for series 1 type connectors will be met.
MIL-DTL-26500 - Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting, General Specification For
This specification covers an environment-resisting family of miniature, circular, electrical connectors (plugs and receptacles), designed to meet the requirements of aerospace vehicles.
MIL-DTL-26518 - Connectors, Electrical, Miniature, Rack And Panel, Environment Resistant, 200 Degrees C Ambient Temperature, General Specification For
This detail specification covers the general requirements for rectangular environment-resisting miniature rack and panel type electrical connectors (plug and receptacle, intended for use in electronic and electrical equipment (see 6.1 for restrictions on intended use and application)).
MIL-DTL-2726/11 - Receptacle, Electrical, 3 - Pin Grounded, 40 - Ampere, 450 - Volt, Alternating Current (Symbol Nos. 1141.1 And 1141.2)
MIL-DTL-2726/12 - Receptacle, Electrical, 3 - Pin Grounded, 40 - Ampere, 450 - Volt, Alternating Current (Symbol Nos. 1141.1 And 1141.2)
MIL-DTL-2726/13 - Receptacle, Cap Assembly, Electrical (Symbol No. 1142.1)
MIL-DTL-2726/14 - Receptacle, Electrical, Enclosed, 3-Pin Grounded, 40-Ampere, 450-Volt, Alternating Current (Symbol Nos. 1145.1, 1145.2 And 1145.3)
MIL-DTL-2726/15 - Receptacle, Electrical, Enclosed, 3 - Pin Grounded, 50 - Ampere, 250-Volt, Direct Current (Symbol Nos. 1146.1, 1146.2 And 1146.3)
MIL-DTL-2726/16 - Receptacle, Electrical, Enclosed, 4 - Pin Grounded, 40 - Ampere, 450 - Volt, Alternating Current (Symbol Nos. 1147.1, 1147.2 And 1147.3)
MIL-DTL-2726/17 - Receptacle, Electrical, Enclosed, 3 - Pin Grounded, 40 - Ampere, 125 - Volt, Alternating Current (Symbol Nos. 1148.1, 1148.2 And 1148.3)
MIL-DTL-2726/18 - Receptacle, Electrical, Triple, 50 - Ampere, 250 - Volt, Direct Current, 3 - Pole Grounded (Symbol No. 1105.1)
MIL-DTL-2726/19 - Receptacle With Switch, Electrical, 30-Ampere, 450-Volt, Alternating Current, 60-Hertz, 3-Phase, Interlocking, Ground (Symbol No. 915.1)
MIL-DTL-2726/1 - Receptacle, Plug, Electrical, 2-Pin, 40-Ampere, 125-Volt, Direct Current (Symbol No. 715.1)
MIL-DTL-2726/20 - Receptacle With Switch, Electrical, 30-Ampere, 450-Volt, 1-Phase, Interlocking, Grounded (Symbol No. 916.1)
MIL-DTL-2726/21 - Receptacle With Switch, Electrical, 30 - Ampere, 250 - Volt, Direct Current, Interlocking, Grounded (Symbol No. 917.1)
MIL-DTL-2726/22 - Receptacle, Outlet, Electrical, Welding, 200 - Ampere, Direct Current, Constant Potential (Symbol No. 770.2)
MIL-DTL-2726/23 - Receptacle, Electrical, Enclosed, 100 - Ampere, 250 - Volt, Direct Current, Bulkhead Mounted (Symbol No. 726.1)
MIL-DTL-2726/24 - Receptacle, Plug, Electrical, Connector, 25 - Ampere, 500 - Volt, 3- Phase Grounded (Symbol No. 707.1)
MIL-DTL-2726/25 - Receptacle, Electrical, Connector, 25-Ampere, 500-Volt, 3-Phase Grounded (Symbol No. 722.1)
MIL-DTL-2726/26 - Receptacle, Plug, Electrical 4 - Pin, 60 - Ampere, 208/117 - Volt, 3 - Phase Grounded (Symbol No. 728.1)
MIL-DTL-2726/27 - Receptacle With Switch, Electrical, 60 - Ampere, 208/117 - Volt, 3- Phase, Interlocking, Grounded (Symbol No. 776.1)
MIL-DTL-2726/28 - Receptacle, Electrical, 4 - Pole Grounded, 100 - Ampere, 450 - Volt, 3 - Phase (Symbol No. 1221)
MIL-DTL-2726/29 - Receptacle, Plug, Electrical, 4 Pole Grounded, 100 - Ampere, 450 Volt, 3 - Phase (Symbol No. 1222)
MIL-DTL-2726/2 - Receptacle, Plug, Electrical, 3 - Pin Grounded, 50 - Ampere, 250 - Volt, Direct Current (Symbol No. 716.1)
MIL-DTL-2726/30 - Receptacle, Plug, Electrical, 10-Ampere, 125-Volt, Single Pole, Male (Symbol No. 727.1 - Red; Symbol No. 727.2 - Black)
MIL-DTL-2726/31 - Receptacle, Plug, Electrical 10 - Ampere, 125 - Volt, Double Pole, Male (Symbol No. 729.1)
MIL-DTL-2726/32 - Receptacle, Electrical, 10-Ampere, 125-Volt, Single Pole, Panel Mounted (Symbol No. 775.1 - Black; Symbol No. 775.2 - Red)
MIL-DTL-2726/33 - Receptacle, Plug, Electrical, 40-Ampere, 125-Volt, Single Pole, Male (Symbol No. 1214.2 - Red; Symbol No. 1214.5 - Black)
MIL-DTL-2726/34 - Receptacle, Plug, Electrical, 40 - Ampere, 125 Volt, Single Pole, Female Type (Symbol No. 1214.3 - Red; Symbol No. 1214.4 - Black)
MIL-DTL-2726/35 - Receptacle, Electrical, 40 - Ampere, 125 - Volt Single Pole, Panel Mounted, Female (Symbol No. 1213.2 - Red; Symbol No. 1213.4 - Black)
MIL-DTL-2726/36 - Receptacle, Electrical, 40 - Ampere, 125 - Volt, Single Pole, Panel Mounted, Male Type (Symbol No. 1213.3 Red; Symbol No. 1213.5 - Black)
MIL-DTL-2726/37 - Receptacle, Electrical, 15 - Ampere, 125 - Volt, 60 Hertz, Bladed Type, Grounded (Symbol No. 1099.1)
MIL-DTL-2726/38 - Receptacle, Plug, Electrical, 15 - Ampere, 125 - Volt, Bladed Type, Grounded (Symbol No. 1218.3)
MIL-DTL-2726/39 - Receptacle And Switch, Electrical, 15 - Ampere, 125 - Volt, Bladed Types, Grounded (Symbol No. 919)
MIL-DTL-2726/3 - Receptacle, Plug, Electrical, 4-Pin Grounded, 40-Ampere, 450-Volt, Alternating Current, 60-Hertz (Symbol No. 717.1)
MIL-DTL-2726/40 - Receptacle Channel, Electrical, 15 - Ampere, 125 - Volt, Bladed Type, Grounded (Symbol No. 730.4)
MIL-DTL-2726/41 - Receptacle, Electrical, Enclosed, 15-Ampere, 125-Volt, (Symbol No. 1098.1)
MIL-DTL-2726/42 - Receptacle, Electrical, Enclosed, 60 - Ampere, 500 - Volt, 3 - Phase, Grounded (Symbol No. 746.2)
MIL-DTL-2726/43 - Receptacle, Electrical, (Bladed) 15-Ampere With 3-Ampere Switch, Type Dpst, 125-Volt, Grounded, Totally Enclosed (Symbol 918.1)
MIL-DTL-2726/44 - Receptacle, Portable Triple Outlet, Electrical, 60 - Ampere, 500 - Volt, 3 - Phase Grounded (Symbol No. 765.3)
MIL-DTL-2726/45 - Receptacle, Outlet Switch, Electrical, 100 - Ampere, 125 - Volt, 60 -Ampere, 250 - Volt, Interlocking, Grounded (Symbol No. 772.1)
MIL-DTL-2726/46 - Receptacle, Plug, Electrical, 100-Ampere, 250 - Volt, Direct Current, 3-Pole (Symbol No. 721.1)
MIL-DTL-2726/47 - Receptacle, Electrical, Enclosed, 15-Ampere, 125-Volt 2-Pole, Grounded (Symbol No. 735.3)
MIL-DTL-2726/48 - Receptacle And Switch, Electrical, Enclosed, 15-Ampere, 125-Volt, Interlocking, Grounded (Symbol No. 900.1)
MIL-DTL-2726/49 - Receptacle, Outlet, Triple, Electrical, 40 - Ampere, 450 - Volt, 60 Hertz, Alternating Current, 4 - Pole, Portable, Plastic Grounded (Symbol Nos. 765.6, 765.7 And 765.8)
MIL-DTL-2726/50 - Receptacle, Plug, Electrical, 15-Ampere, 125/250-Volts, 2-Pole, Grounded (Symbol No. 720.3)
MIL-DTL-2726/51 - Receptacle, Adapter, Electrical, 15-Ampere, 125-Volt, Alternating Current, Grounded (Symbol No. 2440.2)
MIL-DTL-2726/52 - Receptacle, Plug, Electrical, 3-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz, Single Phase (Symbol No. 1257)
MIL-DTL-2726/53 - Receptacle, Plug, Electrical, 4-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz, 3-Phase (Symbol No. 1258)
MIL-DTL-2726/54 - Receptacle, Plug, Electrical, 3-Pin Grounded, 10-Ampere, 450-Volt, 400 Hertz, Single Phase (Symbol No. 1259)
MIL-DTL-2726/55 - Receptacle, Plug, Electrical, 4-Pin Grounded, 10-Ampere,, 450-Volt, 400-Hertz, 3-Phase (Symbol No.1260)
MIL-DTL-2726/56 - Receptacle, Plug, Electrical, 4-Pole Grounded, 60-Ampere, 450-Volt, 3-Phase (Symbol No. 1261)
MIL-DTL-2726/57 - Receptacle, Electrical, 3-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz, Single Phase (Symbol No. 1262)
MIL-DTL-2726/58 - Receptacle, Electrical, 4-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz, Alternating Current (Symbol No. 1263)
MIL-DTL-2726/59 - Receptacle, Electrical, 3-Pin Grounded, 10-Ampere, 450-Volt, 400 Hertz, Single Phase (Symbol No. 1264)
MIL-DTL-2726/5 - Receptacle, Plug, Electrical, 3 Pin Grounded, 40-Ampere, 450-Volt, Alternating Current (Symbol No. 1140.1)
MIL-DTL-2726/60 - Receptacle, Electrical, 4-Pin Grounded, 10-Ampere, 450-Volt, 400 Hertz, 3-Phase (Symbol No. 1265)
MIL-DTL-2726/61 - Receptacle, Electrical, 4-Pole Grounded, 60-Ampere, 450-Volt, 3-Phase (Symbol No. 1266)
MIL-DTL-2726/62 - Receptacle, Electrical, Enclosed 3-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz Single Phase (Symbol No. 1267)
MIL-DTL-2726/63 - Receptacle, Electrical, Enclosed 4-Pin Grounded, 10-Ampere, 450-Volt, 60-Hertz Alternating Current (Symbol No. 1268)
MIL-DTL-2726/64 - Receptacle, Electrical, Enclosed, 3-Pin Grounded, 10-Ampere, 450-Volt, 400-Hertz Single-Phase (Symbol No. 1269)
MIL-DTL-2726/65 - Receptacle, Electrical, Enclosed, 4-Pin Grounded, 10-Ampere, 450-Volt, 400-Hertz, 3-Phase (Symbol No. 1272)
MIL-DTL-2726/67 - Receptacle, Electrical, Enclosed, 10-Ampere, 125-Volt, 3-Phase, Grounded (Symbol No. 741.2)
MIL-DTL-2726/68 - Receptacle, Plug, Connector, Electrical, 10-Ampere, 125-Volt, 3-Phase, Grounded (Symbol No. 706.1)
MIL-DTL-2726/69 - Receptacle, Outlet, Triple, Electrical, Portable, 15-Ampere, 125-Volt Alternating Current, Double Pole, Grounded, 25-Foot Cable Extension (Symbol No. 779)
MIL-DTL-2726/6 - Receptacle, Plug, Electrical, 3 - Pin Grounded, 40 - Ampere, 125 - Volt, Alternating Current (Symbol No. 1143.1)
MIL-DTL-2726/72 - Receptacle, Adapter, Electrical, 15-Ampere, 125-Volt, Alternating Current, 60 To 400-Hertz Grounded (Symbol No. 2439)
MIL-DTL-2726/73 - Receptacle, Electrical, 15-Ampere, 125-Volt, Bladed Type, Grounded (Portable) (Symbol No. 1215)
MIL-DTL-2726/7 - Receptacle, Electrical, 2-Pin, 40-Ampere, 125-Volt Direct Current (Symbol Nos. 756.1 And 756.2)
MIL-DTL-2726/8 - Receptacle, Electrical, 3-Pin Grounded, 50-Ampere, 250-Volt Direct Current (Symbol Nos. 757.1 And 757.2)
MIL-DTL-2726/9 - Receptacle, Electrical, 4 - Pin Grounded, 40 - Ampere, 450 - Volt, Alternating Current (Symbol Nos. 758.1 And 758.2)
MIL-DTL-2726 - Receptacles, Receptacle Plugs, Switch And Receptacles, And Outlets (Electrical), General Specification For
This specification covers the general requirements for power type electrical plugs, receptacles, switch and receptacle combinations, and outlets for use in direct current (dc) circuits up to 250 volts, or in alternating current (ac) circuits up to 600 volts at frequencies up to and including 400 hertz (Hz).
MIL-DTL-27434/10 - Adapter, Connector, Coaxial, Radiofreqeuency, Between Series, Series Lc, Socket Contact, To Series N, Socket Contact, Flange Mount, Type Ug-271A/U
MIL-DTL-27434/13 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Type Ug-497A/U (Series Hn To Lc)
MIL-DTL-27434/15 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Bnc, Pin Contact, To Series Hn, Socket Contact, Right Angle, Type Ug-559B/U
MIL-DTL-27434/16 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Lc To Series Lt Type Ug-586 B/U
MIL-DTL-27434/18 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Bn To Series N Type Ug-605/U
MIL-DTL-27434/20 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Bnc To Series Sm Type Ug-690/U
MIL-DTL-27434/21 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Bnc To Series Sm Type Ug-691/U
MIL-DTL-27434/22 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Qds To Series N Type Ug-966A/U
MIL-DTL-27434/23 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Twin To Series Uhf Type Ug-970/U
MIL-DTL-27434/24 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Twin To Series C Type Ug-971/U
MIL-DTL-27434/28 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Bnc To Series Qds Type Ug-1136/U
MIL-DTL-27434/30 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Type Ug-1142/U (Series C To Qds)
MIL-DTL-27434/32 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Type Ug-1144/U (Series N To Qds)
MIL-DTL-27434/33 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Type Ug-1146/U (Series Bnc To Qds)
MIL-DTL-27434/36 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series N To Series Ln Type Ug-108A/U
MIL-DTL-27434/38 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series N To Series Ln Type Ug-213A/U
This specification covers the detail requirements for type UG-213A/U, between series (series N to series LN), radiofrequency, coaxial connector adapter.
MIL-DTL-27434/5 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series C To Series Uhf Type Ug-637/U
MIL-DTL-27434/6 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Hn To Series Lc Type Ug-217A/U
MIL-DTL-27434/7 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Type Ug-218A/U (Series Hn To Lc)
MIL-DTL-27434/8 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Hn To Series Lc Type Ug-259 A/U
MIL-DTL-27434/9 - Adapter, Connector, Coaxial, Radiofrequency, Between Series, Series Lc, Socket Contact, To Series N, Socket Contact, Type Ug-270A/U
MIL-DTL-27434 - Adapters, Connector, Coaxial, Radiofrequency, Between Series, General Specification For
This specification covers the general requirements for weatherproof, between series, radio-frequency, coaxial connector adapters having a nominal impedance of 50 ohms (see 6.1).
MIL-DTL-27599 - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification For
This specification covers two series of miniature, high density, quick disconnect, bayonet coupling, circular, environment resistant, electrical connectors capable of continuous operation within a temperature range of -65 Degrees C to +175 Degrees C (see 6.1). These connectors are intermateable with applicable series I and series II connectors of MIL-DTL-38999. These connectors are supplied under a MIL-STD-790 reliability assurance program. See 6.1 for restrictions on intended use and applications.
MIL-DTL-28731/19 - Connector, Electrical, Rectangular Shield For 20, 38, 56, 90 Or 120 Removable Contacts
MIL-DTL-28731/20 - Connector, Electrical, Contact, Fork Type, Crimp Removable (8.5 Amperes)
MIL-DTL-28731/23 - Connector, Electricial, Contact, Fork Type, Removable, Double Wire Crimp
MIL-DTL-28731/24 - Connector, Electrical, Rectangular Shield, For 120 Removable Contacts
MIL-DTL-28731/26 - Connectors, Electrical, Contact, Fork Type, Wrappost, Removable
MIL-DTL-28731/29 - Connectors, Electrical, Insert (Insulator), Male Rectangular, Polarized, Center Screw Lock, For 75 Removable Type Contacts
MIL-DTL-28731/30 - Connectors, Electrical, Insert (Insulator), Female Rectangular, Polarized, Center Screw Lock, For 75 Removable Type Contacts
MIL-DTL-28731/31 - Connectors, Electrical, Insert (Insulator), Male Rectangular, Polarized, Center Screw Lock For 117 Removable Type Contacts
MIL-DTL-28731/32 - Connectors, Electrical, Insert (Insulator), Female Rectangular, Polarized, Center Screw Lock, For 117 Removable Type Contacts
MIL-DTL-28731/33 - Connectors, Electrical, Insert (Insulator), Male Rectangular, Polarized, Center Screw Lock, For 165 Removable Type Contacts
MIL-DTL-28731/34 - Connector, Electrical, Insert (Insulator), Female Rectangular, Polarized, Center Screw Lock, For 165 Removable Type Contacts
MIL-DTL-28731/35 - Connectors, Electrical, Contact Fork Type, Crimp Removable (5.0 Amperes)
MIL-DTL-28731/36 - Connector, Electrical, Contact, Fork Type, Wrappost Removable (3.0 Amperes)
MIL-DTL-28731/37 - Connector, Electrical, Rectangular Shield, For Female Rectangular 165 Removable Type Contacts
MIL-DTL-28731/38 - Connector, Electrical, Rectangular Shield, For Use With Mil-C-28731/32
MIL-DTL-28731 - Connectors, Electrical, Rectangular, Removable Contact, Formed Blade, Fork Type (For Rack And Panel And Other Applications) General Specification For
This specification covers rectangular, electrical connectors with removable formed blade; fork type contacts intended for use in electronic and electrical equipment (see 6.1).
MIL-DTL-28748/10 - Connectors, Electrical, Rectangular, Rack And Panel, Polarized Center Jackscrew Or Guidepin Style Crimp Type Removable Socket Contacts, Size 16
MIL-DTL-28748/1 - Connectors, Electrical, Rectangular, Rack And Panel, Solder Type Pin Contacts, Size 16
MIL-DTL-28748/2 - Connectors, Electrical, Rectangular, Rack And Panel, Solder Type Socket Contacts, Size 16
MIL-DTL-28748/3 - Connectors, Electrical, Rectangular, Rack And Panel, Crimp Type Removable Pin Contacts, Sizes 16 And 20
MIL-DTL-28748/4 - Connector, Electrical, Rectangular, Rack And Panel, Crimp Type Removable Socket Contacts, Sizes 16 And 20
MIL-DTL-28748/5 - Connectors, Electrical Rectangular, Rack And Panel, Solder Type Pin Contacts, Size 20
MIL-DTL-28748/6 - Connectors, Electrical Rectangular, Rack And Panel, Solder Type Socket Contacts, Size 20
MIL-DTL-28748/7 - Connectors, Electrical, Rectangular, Rack And Panel, Solder Type Pin Contacts, Size 22
MIL-DTL-28748/8 - Connectors, Electrical, Rectangular, Rack And Panel, Solder Type Socket Contacts, Size 22
MIL-DTL-28748/9 - Connectors, Electrical, Rectangular, Rack And Panel, Polarized Center Jackscrew Or Guidepin Style Crimp Type Removable Pin Contacts, Size 16
MIL-DTL-28748 - Connector, Plug And Receptacle, Rectangular, Rack And Panel Solder Type And Crimp Type Contacts General Specification For
This specification covers rectangular, rack and panel, electrical connectors, with nonremovable solder type contacts, and removable crimp type contacts, intended for use in electronic and electrical equipment (see 6.1).
MIL-DTL-28754/17 - Connectors, Electrical, Modular, Connector Assembly, Type V, Style I, Contact Tails On .100 Centers
MIL-DTL-28804/10 - Connectors, Sockets Contact, Electric, Rectangular, High Density, Polarized Center Jackscrew, Size 22, Crimp Removable
MIL-DTL-28804/1 - Connectors, Receptacle, Electric, Rectangular, High Density, Polarized Center Jackscrew, Crimp Removable Socket Contacts, Class G
MIL-DTL-28804/7 - Connectors, Receptacle, Electric, Rectangular, High Density, Polarized Center Jackscrew, Solder Socket Contacts, Class S
MIL-DTL-28804/9 - Connectors, Pin Contact, Electric, Rectangular, High Density, Polarized Center Jackscrew, Size 22, Crimp Removable
MIL-DTL-28804 - Connectors, Plug And Receptacle, Electric, Rectangular, High Density, Polarization Center Jackscrew, General Specification For
This detail specification covers the general requirements for rectangular electrical connectors, with size 22, nonremovable, solder type contacts, and rear removable crimp type contacts, environment resistant and non-environment, intended for use in electronic and electrical equipment (see 6.1 for restrictions on intended use and application).
MIL-DTL-28840/10 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Wall Mounting, Classes D, Ds, P, T, Ts, Z, And Zs
MIL-DTL-28840/11 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Cable Connecting, Classes D, Ds, P, T, Ts, Z, And Zs
MIL-DTL-28840/12 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Box Mounting, Classes D, Ds, P, T, Ts, Z And Zs
MIL-DTL-28840/13 - Connectors Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Protective Cover, Receptacle
MIL-DTL-28840/14 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Jam Nut Mounting, Classes D, Ds, P, T, Ts, Z And Zs
MIL-DTL-28840/15 - Connectors, Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Protective Cover, Plug
MIL-DTL-28840/16 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Plug, Classes D, Ds, P, T, Ts, Z, And Zs
MIL-DTL-28840/17 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Plug Assembly, Open Wire, Classes D, Ds, P, T, Ts, Z, And Zs
MIL-DTL-28840/18 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Plug Assembly, Open Wire, 90 Degrees, Classes D, Ds, P, T, Ts, Z,And Zs
MIL-DTL-28840/19 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Plug Assembly, Open Wire, 45 Degrees, Classes D, Ds, P, T, Ts, Z, And Zs
MIL-DTL-28840/1 - Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, Straight, Open, For Electrical Connectors
MIL-DTL-28840/20 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Wall Mounting Assembly, Straight, Classes Dj, Djs, Pj, Tj, Tjs, Zj, And Zjs
MIL-DTL-28840/21 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Receptacle, Cable Connecting Assembly, Straight, Classes Dj, Djs, Pj, Tj, Tjs, Zj, And Zjs
MIL-DTL-28840/22 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Metal Conduit Bushing
MIL-DTL-28840/23 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Gland Nut, Wiring
MIL-DTL-28840/24 - Connectors, Electrical, Circular, Gasket, Flange Mounting, Florosilicone And Emi Shielding (For Mil-Dtl-28840)
MIL-DTL-28840/25 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 90 Degrees, Metal Conduit For Emi Shielding
MIL-DTL-28840/26 - Connectors, Electrical, Circular, Threaded, High Density, High Shock, Shipboard, Crimp Contacts, Plug Assembly, Straight, Classes Dj, Djs, Pj, Tj, Tjs, Zj, And Zjs
MIL-DTL-28840/27 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 45 Degrees, Metal Conduit For Emi Shielding
MIL-DTL-28840/28 - Connectors, Electrical, Circular, Threaded, High Density, High Shock, Shipboard, Crimp Contacts, Plug Assembly, 90 Degrees, Classes Dj, Djs, Pj, Tj, Tjs, Zj, And Zjs
MIL-DTL-28840/29 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Plug Assembly, 45 Degrees, Classes Dj, Djs, Pj, Tj, Tjs, Zj And Zjs
MIL-DTL-28840/2 - Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, 90 Degrees, Open, For Electrical Connectors
MIL-DTL-28840/30 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Metal Conduit Coupling
MIL-DTL-28840/3 - Connector Accessories, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Clamps, Strain Relief, 45 Degrees, Open, For Electrical Connectors
MIL-DTL-28840/4 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Metal Conduit, For Emi Shielding
MIL-DTL-28840/5 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Straight, Metal Conduit For Emi Shielding
MIL-DTL-28840/6 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, Straight, Cable Sealing And Shield Termination
MIL-DTL-28840/7 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Crimp Contacts, Dummy Receptacle, Wall Mounting
MIL-DTL-28840/8 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 90 Degrees, Cable Sealing And Shield Termination
MIL-DTL-28840/9 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Backshell, 45 Degrees, Cable Sealing And Shield Termination
MIL-DTL-28840 - Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Class D, General Specification For
This specification covers circular electrical connectors with removable crimp type, front release contacts. These connectors are for use with jacketed cables in shipboard applications.
MIL-DTL-3607/1 - Connector, Plug, Electrical, Series Pulse, Type Ug-34/U
MIL-DTL-3607/2 - Connector, Plug, Electrical, Series Pulse, Type Ug-36/U
MIL-DTL-3607/3 - Connector, Receptacle, Electrical, Series Pulse, Type Ug-37/U
MIL-DTL-3607/7 - Connector, Plug, Electrical, Series Pulse, Type Ug-180A/U
MIL-DTL-3607/9 - Connector, Receptacle, Electrical, Series Pulse, Type Ug-182A/U
MIL-DTL-3607 - Connectors, Coaxial, Radiofrequency, Series For Pulse, General Specification For
This specification covers the general requirements for weatherproof, high-voltage, series pulse, radiofrequency coaxial connectors (see 6.1 and 6.3).
MIL-DTL-3643/4 - Connector, Adapter, Series Hn, Type Ug-212C/U
MIL-DTL-3643 - Connectors, Coaxial, Radio Frequency, Series Hn, And Associated Fittings, General Specification For
This specification covers the general requirements for weatherproof, series HN-radio-frequency, coaxial connectors and associated fittings. These connectors have a nominal impedance of 50 ohms, an operating voltage of 1,500 volts root mean square, and a nominal operating frequency range of 0 to 10,000 MHz (see 6.1 and 6.3).
MIL-DTL-3650 - Connector, Coaxial, Radio Frequency, Series Lc
This specification covers weatherproof, series LC, radio frequency, coaxial connectors having a nominal impedance of 50 ohms (see 6.1 and 6.2).
MIL-DTL-3655/10 - Connector, Shield, Electrical, Class I (Coaxial, Series Twin) Type Mx-1556/U
MIL-DTL-3655/11 - Connector, Shield, Electrical, Class I (Coaxial, Series Twin) Type Ug-106/U
MIL-DTL-3655/13 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twtnc, Jam Nut Mounted)
MIL-DTL-3655/14 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twtnc)
MIL-DTL-3655/15 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twbnc)
MIL-DTL-3655/16 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twbnc)
MIL-DTL-3655/17 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin, Twtnc, Right Angle)
MIL-DTL-3655/1 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin) Type Ug-421B/U
MIL-DTL-3655/22 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, Twtnc, Bulkhead)
MIL-DTL-3655/23 - Connector, Receptacle, Electrical, Class I, (Coaxial, Series Twin, Twbnc, Bulkhead)
MIL-DTL-3655/2 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin) Type Ug-422/U
MIL-DTL-3655/3 - Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin) Type Ug-423B/U
MIL-DTL-3655/4 - Connector, Adapter, Electrical, Class I (Coaxial, Series Twin) Type Ug-493A/U
MIL-DTL-3655/5 - Connector, Adapter, Electrical, Class I (Coaxial, Series Twin) Type Ug-981/U
MIL-DTL-3655/6 - Connector, Receptacle, Electrical, Class Ii (Coaxial, Series Twin) Type Ug-1057/U
MIL-DTL-3655/8 - Connector, Adapter, Electrical, Class Ii (Coaxial, Series Twin) Type Ug-1059/U
MIL-DTL-3655/9 - Connector, Plug, Electrical, Class I (Coaxial, Series Twin) Type Ug-1060A/U
MIL-DTL-3655 - Connector, Plug And Receptacle, Electrical (Coaxial, Series Twin), And Associated Fittings, General Specification For
This specification covers the general requirements for series twin, coaxial connectors and associated fittings (see 6.1).
MIL-DTL-38159 - Connectors, Electric, Ramp Power, 480/277 Volts, General Specification For
This specification covers the requirements for molded rubber male and female connectors for 480/277 volt ramp power (see 6.4.2, 6.4.4, and 6.4.9) for use in non-hazardous and hazardous (classified) locations.
MIL-DTL-38999/10 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Bayonet Coupling, (Mil-Dtl-27599, Series Ii And Mil-Dtl-38999, Series Ii)
MIL-DTL-38999/20 - Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Series Iii, Metric
MIL-DTL-38999/21 - Connectors, Electrical, Circular, Threaded, Receptacle, Box Mounting Flange, Hermetic, Hermetic Solder Contacts, Series Iii, Metric
MIL-DTL-38999/22 - Connectors, Electrical, Circular, Receptacle, Threaded, Dummy Stowage, Series Iii, Metric
MIL-DTL-38999/23 - Connectors, Electrical, Circular, Threaded, Receptacle, Jam-Nut Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric
MIL-DTL-38999/24 - Connectors, Electrical, Circular, Receptacle, Threaded, Jam-Nut Mounting, Removable Crimp Contacts, Series Iii, Metric
MIL-DTL-38999/25 - Connector, Electrical, Circular, Threaded, Receptacle, Solder Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric
MIL-DTL-38999/26 - Connectors, Electrical, Plug, Circular, Threaded, Straight, Removable Crimp Contacts, Series Iii, Metric
MIL-DTL-38999/27 - Connectors, Electrical, Circular, Threaded, Receptacle, Weld Mounting, Hermetic, Hermetic Solder Contacts, Series Iii, Metric
MIL-DTL-38999/28 - Connectors, Electrical, Circular, Nut, Hexagon, Connector Mounting, Series Iii And Iv, Metric
MIL-DTL-38999/29 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Series Iii, Metric
MIL-DTL-38999/30 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Sockets, Series Iii, Metric
MIL-DTL-38999/31 - Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Shell Size 25, Series Iii, Metric
MIL-DTL-38999/32 - Connector, Electrical Circular, Cover, Protective, Plug, Series Iii, Metric
MIL-DTL-38999/33 - Connector, Electrical Circular, Cover, Protective, Receptacle, Series Iii, Metric
MIL-DTL-38999/40 - Connectors, Electrical, Circular, Receptacle, Wall Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/41 - Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
MIL-DTL-38999/42 - Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/43 - Connectors, Electrical, Circular, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
MIL-DTL-38999/44 - Connectors, Electrical, Circular, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/45 - Connectors, Electrical, Circular, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series Iv, Metric
MIL-DTL-38999/46 - Connectors, Electrical, Circular, Plug, Breech Coupling, Emi Grounding, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/47 - Connectors, Electrical, Circular, Plug, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/48 - Connectors, Electrical, Circular, Receptacle, Weld Mounting, Hermetic, Breech Coupling, Hermetic Soler Contacts, Series Iv, Metric
MIL-DTL-38999/49 - Connectors, Electrical, Circular, Receptacle, In-Line Cable, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
MIL-DTL-38999/50 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Breech Coupling, Series Iv, Metric
MIL-DTL-38999/9 - Connectors, Electrical, Circular, Receptacle, Dummy Stowage, Bayonet Coupling, (Mil-Dtl-27599 Series I And Mil-Dtl-38999 Series I)
MIL-DTL-38999 - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, And Breech Coupling), Environment Resistant, Removable Crimp And Hermetic Solder Contacts, General Specification For
This specification covers four series of miniature, high density, bayonet, threaded, or breech coupling, circular, environment resistant, electrical connectors using removable crimp or fixed hermetic solder contacts, and are capable of operation within a temperature range of -65 degrees C to +200 degrees C (see 1.3.1d). See 6.1 for intended use and applications.
MIL-DTL-39024/10 - Jack, Tip (Test Point Type, Panel Type; Single Test Point (Threaded) Low Voltage, .080)
MIL-DTL-39024/11 - Jack, Tip, Test Point Type, Printed Wiring Type, Single Test Point, Right Angle, 2-Leg Mounting, Low Voltage, .080
MIL-DTL-39024/
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business